Forschungsdaten – Titel und Zusammenfassungen von Publikationen, extrahierte Daten und Katalogeinträge – erscheinen in ihrer Originalsprache Englisch.
Publikation
Low electric current in a bioelectrochemical system facilitates ethanol production from CO using CO-enriched mixed culture
Zusammenfassung
Was die Publikation berichtet, in ihren eigenen Worten.
Zusammenfassung
Fossil resources must be replaced by renewable resources in production systems to mitigate green-house gas emissions and combat climate change. Electro-fermentation utilizes a bioelectrochemical system (BES) to valorize industrial and municipal waste. Current electro-fermentation research is mainly focused on microbial electrosynthesis using CO 2 for producing commodity chemicals and replacing petroleum-based infrastructures. However, slow production rates and low titers of metabolites during CO 2 -based microbial electrosynthesis impede its implementation to the real application in the near future. On the other hand, CO is a highly reactive gas and an abundant feedstock discharged from fossil fuel-based industry. Here, we investigated CO and CO 2 electro-fermentation, using a CO-enriched culture. Fresh cow fecal waste was enriched under an atmosphere of 50% CO and 20% CO 2 in N 2 using serial cultivation. The CO-enriched culture was dominated by Clostridium autoethanogenum (≥89%) and showed electro-activity in a BES reactor with CO 2 sparging. When 50% CO was included in the 20% CO 2 gas with 10 mA applied current, acetate and ethanol were produced up to 12.9 ± 2.7 mM and 2.7 ± 1.1 mM, respectively. The coulombic efficiency was estimated to 148% ± 8% without an electron mediator. At 25 mA, the culture showed faster initial growth and acetate production but no ethanol production, and only at 86% ± 4% coulombic efficiency. The maximum optical density (OD) of 10 mA and 25 mA reactors were 0.29 ± 0.07 and 0.41 ± 0.03, respectively, whereas it was 0.77 ± 0.19 without electric current. These results show that CO electro-fermentation at low current can be an alternative way of valorizing industrial waste gas using a bioelectrochemical system.
KI-Zusammenfassung
95 % KonfidenzBES research focusing on bacteria, power, substrate. Fossil resources must be replaced by renewable resources in production systems to mitigate green-house gas emissions and combat climate change. Electro-fermentation utilizes a bioelectrochemic...
Erstellt von der MESSAI-Extraktionspipeline · mit dem Quell-PDF abgleichen
Extrahierte Werte
Jeder aus der Publikation entnommene Wert mit seiner Quelle, damit sich jede Zahl am Text prüfen lässt.
n = 42 extrahierte Werte
Wählen Sie eine Quellenangabe, um Zitat, Seite und Konfidenz hinter einem Wert zu sehen.
8 von 40 extrahierten Zeilen modellierbar
- 5 nicht kanonisiert (kein kanonischer Slug)
- 27 kein SI-Wert
| Parameter | Wert | Einheit | Konfidenz | Quelle | Anmerkungen | Modellierbar |
|---|---|---|---|---|---|---|
| Substrate | acetate,ethanol | — | 80 % | llm | ||
| Coulombic efficiency | 8 | % | 80 % | llm | ||
| Product Concentration | 0,12 | g/L | 95 % | hplc with refractive index detector | "Acetate and ethanol titers (g/L) Ac 0.60 ± 0.03 Eth 0.12 ± 0.05" · T=37°C, pH(an)=5, substrate=co_and_co2, steady_state | Ausgeschlossen: kein SI-Wert |
| Acetic Acid Concentration | 2,7 | mM | 95 % | hplc with refractive index detector | "At the end of the experiment, 12.9 ± 2.7 mM acetate and 2.7 ± 1.1 mM ethanol wer…" · T=37°C, pH(an)=5, substrate=co_and_co2, steady_state | Ausgeschlossen: kein SI-Wert |
| Acetic Acid Concentration | 1,2 | mM | 95 % | hplc with refractive index detector | "At the end of the experiments, concentrations of 11.3 ± 0.9 mM acetate and 1.6 ±…" · T=37°C, pH(an)=6.2, substrate=co2, steady_state | Ausgeschlossen: kein SI-Wert |
| Acetic Acid Concentration | 1,6 | mM | 95 % | hplc with refractive index detector | "At the end of the experiments, concentrations of 11.3 ± 0.9 mM acetate and 1.6 ±…" · T=37°C, pH(an)=5.9, substrate=co2, steady_state | Ausgeschlossen: kein SI-Wert |
| Relative Abundance | 7,49 | % | 95 % | 16s rrna sequencing (v1-v2 primer set) | "The second most frequent bacterial species of the enriched community was identif…" · T=37°C, pH(an)=5, substrate=co_and_co2 | Modellierbar |
| Relative Abundance | 4,03 | % | 95 % | 16s rrna sequencing (v3-v4 primer set) | "Lacticaseobacillus chiayiensis (4% with primers V3–V4)" · T=37°C, pH(an)=5, substrate=co_and_co2 | Modellierbar |
| Specific Growth Rate | 0,044 | h⁻¹ | 95 % | spectrophotometry at 600 nm | "The cell growth rate in the 25 mA reactor was faster (μ = 0.044 ± 0.001 h−1) tha…" · T=37°C, pH(an)=6.2, substrate=co2, startup | Modellierbar |
| Relative Abundance | 94,3 | % | 95 % | 16s rrna sequencing (v3-v4 primer set) | "The majority of the bacterial community (≥89%) was found to consist of Clostridi…" · T=37°C, pH(an)=5, substrate=co_and_co2 | Modellierbar |
| Relative Abundance | 89,1 | % | 95 % | 16s rrna sequencing (v1-v2 primer set) | "The majority of the bacterial community (≥89%) was found to consist of Clostridi…" · T=37°C, pH(an)=5, substrate=co_and_co2 | Modellierbar |
| Specific Growth Rate | 0,011 | h⁻¹ | 95 % | spectrophotometry at 600 nm | "The cell growth rate in the 25 mA reactor was faster (μ = 0.044 ± 0.001 h−1) tha…" · T=37°C, pH(an)=5.9, substrate=co2, startup | Modellierbar |
| Acetic Acid Concentration | 12,9 | mM | 95 % | hplc with refractive index detector | "At the end of the experiment, 12.9 ± 2.7 mM acetate and 2.7 ± 1.1 mM ethanol wer…" · T=37°C, pH(an)=5, substrate=co_and_co2, steady_state | Ausgeschlossen: kein SI-Wert |
| Biomass Concentration | 0,3 | — | 95 % | spectrophotometry at 600 nm | "When 10 mA of electric current was applied, the maximum OD was lower (0.30 ± 0.0…" · T=37°C, pH(an)=5, substrate=co_and_co2, steady_state | Ausgeschlossen: kein SI-Wert |
| Acetic Acid Concentration | 16,9 | mM | 95 % | hplc with refractive index detector | "When no electric current was applied, the maximum OD, 0.78 ± 0.19, was achieved …" · T=37°C, pH(an)=5, substrate=co_and_co2, steady_state | Ausgeschlossen: kein SI-Wert |
| Acetic Acid Concentration | 3 | mM | 95 % | hplc with refractive index detector | "While no acetate production was observed in the abiotic experiment, formate was …" · T=37°C, pH(an)=5, substrate=co_and_co2 | Ausgeschlossen: kein SI-Wert |
| Acetic Acid Concentration | 6,8 | mM | 95 % | hplc with refractive index detector | "At the end of the experiments, concentrations of 11.3 ± 0.9 mM acetate and 1.6 ±…" · T=37°C, pH(an)=6.2, substrate=co2, steady_state | Ausgeschlossen: kein SI-Wert |
| Acetic Acid Concentration | 15,3 | mM | 95 % | hplc with refractive index detector | "The maximum OD reached 0.42 ± 0.04 on day 2, and 15.3 ± 3.0 mM of acetate was de…" · T=37°C, pH(an)=5, substrate=co_and_co2, steady_state | Ausgeschlossen: kein SI-Wert |
| Acetic Acid Concentration | 5,8 | mM | 95 % | hplc with refractive index detector | "While no acetate production was observed in the abiotic experiment, formate was …" · T=37°C, pH(an)=5, substrate=co_and_co2 | Ausgeschlossen: kein SI-Wert |
| Biomass Concentration | 0,77 | — | 95 % | spectrophotometry at 600 nm | "The maximum optical density (OD) of 10 mA and 25 mA reactors were 0.29 ± 0.07 an…" · T=37°C, pH(an)=5, substrate=co_and_co2, steady_state | Ausgeschlossen: kein SI-Wert |
| Acetic Acid Concentration | 11,3 | mM | 95 % | hplc with refractive index detector | "At the end of the experiments, concentrations of 11.3 ± 0.9 mM acetate and 1.6 ±…" · T=37°C, pH(an)=5.9, substrate=co2, steady_state | Ausgeschlossen: kein SI-Wert |
| Biomass Concentration | 0,42 | — | 95 % | spectrophotometry at 600 nm | "The maximum OD reached 0.42 ± 0.04 on day 2, and 15.3 ± 3.0 mM of acetate was de…" · T=37°C, pH(an)=5, substrate=co_and_co2, startup | Ausgeschlossen: kein SI-Wert |
| Acetic Acid Concentration | 0,6 | g/L | 95 % | hplc with refractive index detector | "Acetate and ethanol titers (g/L) Ac 0.60 ± 0.03 Eth 0.12 ± 0.05" · T=37°C, pH(an)=5, substrate=co_and_co2, steady_state | Modellierbar |
| Acetic Acid Concentration | 0,72 | g/L | 95 % | hplc with refractive index detector | "Acetate and ethanol titers (g/L) ... Ac 0.72 ± 0.14" · T=37°C, pH(an)=5, substrate=co_and_co2, steady_state | Modellierbar |
| Biomass Concentration | 0,29 | — | 95 % | spectrophotometry at 600 nm | "The maximum optical density (OD) of 10 mA and 25 mA reactors were 0.29 ± 0.07 an…" · T=37°C, pH(an)=5, substrate=co_and_co2, steady_state | Ausgeschlossen: kein SI-Wert |
Literatur-Priors
Im Vergleich zur Literatur
Der in der Publikation berichtete Wert (▼) ist auf der Literaturverteilung aus MESS-Parameters eingezeichnet. Werte außerhalb des Bands werden als Ausreißer gekennzeichnet.
Methodik
Welches System und wie es betrieben wurde
Methodik
Methodology
The authors investigated the use of a bioelectrochemical system with low electric current to facilitate ethanol production from CO using a CO-enriched mixed culture.
Biologische Parameter
| Feld | Wert |
|---|---|
| dominant species | ["Clostridium"] |
Leistungskennzahlen
| Feld | Wert |
|---|---|
| coulombic efficiency | 8 |
| citation count | 3 |
Betriebsparameter
| Feld | Wert |
|---|---|
| substrate | ["acetate","ethanol"] |
Betriebsbedingungen
16 Läufe extrahiert| Lauf | T°C | pHAnolyt | pHKatholyt | Substrat | [S]mg/L | HRTh | Modus | R_extΩ | V_appV | Inokulum |
|---|---|---|---|---|---|---|---|---|---|---|
| v2-0fff8aa2a44bcf21 | 37 | 5 | — | co_and_co2 | — | — | steady_state | — | — | — |
| v2-379f9afb6ff07aaf | 37 | 5 | — | co_and_co2 | — | — | — | — | -0.8 | — |
| v2-3e184a9e73909e31 | 37 | 5 | — | co_and_co2 | — | — | — | — | -1 | — |
| v2-58a2540478c500d8 | 25 | — | — | — | — | — | — | — | — | — |
| v2-6f336e1a25fe9d19 | 37 | 5 | — | co_and_co2 | — | — | steady_state | — | -1 | — |
| v2-75cc08d7def72fd4 | 37 | 5 | — | CO and CO2 | — | — | batch | — | — | — |
| v2-96c77d8d0ebbb066 | — | — | — | — | — | — | startup | — | — | — |
| v2-9ac075bcf106f8c1 | 37 | 5.9 | — | co2 | — | — | steady_state | — | -0.8 | — |
| v2-ab45e64a47441279 | 37 | 5 | — | co_and_co2 | — | — | steady_state | — | -0.8 | — |
| v2-c3f11826babebaa6 | 37 | 5 | — | co_and_co2 | — | — | — | — | — | — |
| v2-c3fbc7e70c689b34 | 37 | 5 | — | co_and_co2 | — | — | startup | — | -0.8 | — |
| v2-c65079053aa9e59f | 37 | 6.2 | — | co2 | — | — | startup | — | -1 | — |
| v2-d8c3a00ee3938b79 | 37 | 6.2 | — | co2 | — | — | steady_state | — | -1 | — |
| v2-df95e568afbdce74 | 37 | 5.9 | — | co2 | — | — | startup | — | -0.8 | — |
| v2-f3c38fe8acc74b70 | 37 | 5 | — | co_and_co2 | — | — | startup | — | -1 | — |
| v2-f586e9af22985397 | — | — | — | — | — | — | — | — | — | — |
Ergebnisse
Was gemessen wurde und was funktioniert hat
Kernaussagen
Coulombic efficiency
Elektrochemie8Prozent
Extraktionspipeline
Rohextraktionen, Artefakte, Qualitätssignal
Extraktionsqualität
EhrlichkeitssignalBemessen Sie Ihr Vertrauen in die extrahierten Inhalte an diesen Signalen – so hat die Pipeline ihre eigene Ausgabe für diese Publikation bewertet.
Parametervollständigkeit
63 %
Anteil der erwarteten Parameter, die extrahiert wurden
Datenvollständigkeit
70 %
Gesamtabdeckung der Extraktion über alle Felder
KI-Konfidenz
95 %
Vom Modell selbst angegebene Konfidenz
Mittlere Parameterkonfidenz
91 %
Durchschnittliche Konfidenz der oben angezeigten PaperParameter-Zeilen
vor dem Zitieren mit dem Quell-PDF abgleichen · Werte 0–1
Diagramm-Explorer
Verändern Sie die Eingaben dieser Publikation und sehen Sie, wie sich das vorhergesagte Ergebnis verschiebt.
Modell erkunden
Der Reaktor in 3D, mit Strömung, die sich ein- und ausschalten lässt.
KI-Erkenntnisse
Widersprüche, Lücken und Chancen aus dem Vergleich dieser Publikation mit dem Korpus.
Ähnliche Publikationen vergleichen
Die nächsten Publikationen nach System, Materialien und Organismen, mit ihren Ergebnissen nebeneinander.
Quell-PDF
Die Publikation, wie sie erschienen ist.
Dieser Publikation ist noch kein 3D-Modell zugeordnet. Die daraus extrahierten Werte stehen unter „Extrahierte Werte“.
In diesem Datensatz
Organismen, Parameter und Materialien, die diese Publikation berichtet. Jeder Eintrag verweist auf seine Seite.
Organismen · 1
Parameter · 1
Schlagwörter
- Pulp and paper industry
- Fermentation
- Microbial fuel cell
- Ethanol fuel
- Raw material
- Faraday efficiency
Zitieren
Chaeho Im, Minsoo Kim, Jung Rae Kim et al. (2024). Low electric current in a bioelectrochemical system facilitates ethanol production from CO using CO-enriched mixed culture. Frontiers in Microbiology. https://doi.org/10.3389/fmicb.2024.1438758
- Zeitschrift
- Frontiers in Microbiology