Forschungsdaten – Titel und Zusammenfassungen von Publikationen, extrahierte Daten und Katalogeinträge – erscheinen in ihrer Originalsprache Englisch.
Publikation · MES
Effect of tungstate on acetate and ethanol production by the electrosynthetic bacterium Sporomusa ovata
Zusammenfassung
Was die Publikation berichtet, in ihren eigenen Worten.
Zusammenfassung
This study presented here shows that optimization of microbial catalyst growth medium can improve productivity and lead to the biosynthesis of different products by gas fermentation and MES. It also provides insights on the metabolism of biofuels production in acetogens and demonstrates that S. ovata has an important untapped metabolic potential for the production of other chemicals than acetate via CO2-converting bioprocesses including MES.
Extrahierte Werte
Jeder aus der Publikation entnommene Wert mit seiner Quelle, damit sich jede Zahl am Text prüfen lässt.
n = 66 extrahierte Werte
Wählen Sie eine Quellenangabe, um Zitat, Seite und Konfidenz hinter einem Wert zu sehen.
15 von 66 extrahierten Zeilen modellierbar
- 12 nicht kanonisiert (kein kanonischer Slug)
- 39 kein SI-Wert
| Parameter | Wert | Einheit | Konfidenz | Quelle | Anmerkungen | Modellierbar |
|---|---|---|---|---|---|---|
| aor1-2 transcript abundance fold change | 30,4 | fold | 95 % | rt-qpcr | "In the presence of 10× tungstate, transcript abundance of aor1–2 was significant…" · T=30°C, pH(an)=7.3, substrate=h2_co2, startup | Ausgeschlossen: nicht kanonisiert (kein kanonischer Slug) |
| 1-propanol final concentration | 1,65 | mM | 95 % | gc-fid | "Final concentration (mM) 1-propanol 10× 1.65 ± 0.14" · T=30°C, pH(an)=7.3, substrate=h2_co2_with_propionate, steady_state | Ausgeschlossen: nicht kanonisiert (kein kanonischer Slug) |
| Acetate Production Rate | 3,2 | mmol gCD W⁻¹ d⁻¹ | 95 % | hplc | "Production rate (mmol gCD W−1 d−1) Acetate 10× 3.20 ± 0.22" · T=30°C, pH(an)=7.3, substrate=h2_co2, steady_state | Ausgeschlossen: kein SI-Wert |
| Acetic Acid Concentration | 37,5 | mM | 95 % | hplc | "Final concentration (mM) Acetate 1× 37.52 ± 1.49" · T=30°C, pH(an)=4.8, substrate=h2_co2, steady_state | Ausgeschlossen: kein SI-Wert |
| Acetic Acid Concentration | 4,29 | mM | 95 % | gc-fid | "Final concentration (mM) Ethanol 1× 4.29 ± 1.18" · T=30°C, pH(an)=4.8, substrate=h2_co2, steady_state | Ausgeschlossen: kein SI-Wert |
| fdhA2 transcript abundance fold change | 3,3 | fold | 95 % | rt-qpcr | "Transcript abundance of fdhA2 was increased 3.3 ± 0.2-fold when tungstate concen…" · T=30°C, pH(an)=7.3, substrate=h2_co2, startup | Ausgeschlossen: nicht kanonisiert (kein kanonischer Slug) |
| 1-butanol final concentration | 0,81 | mM | 95 % | gc-fid | "Final concentration (mM) 1-butanol 1× 0.81 ± 0.13" · T=30°C, pH(an)=7.3, substrate=h2_co2_with_butyrate, steady_state | Ausgeschlossen: nicht kanonisiert (kein kanonischer Slug) |
| aor4 transcript abundance fold change | 14,3 | fold | 95 % | rt-qpcr | "aor4 and mop2 were also upregulated by 14.3 ± 5.6-fold and 3.8 ± 0.4-fold, respe…" · T=30°C, pH(an)=7.3, substrate=h2_co2, startup | Ausgeschlossen: nicht kanonisiert (kein kanonischer Slug) |
| Acetate Production Rate | 3,16 | mmol gCD W⁻¹ d⁻¹ | 95 % | hplc | "Production rate (mmol gCD W−1 d−1) Acetate 50× 3.16 ± 0.19" · T=30°C, pH(an)=7.3, substrate=h2_co2, steady_state | Ausgeschlossen: kein SI-Wert |
| Formic Acid Production Rate | 0,16 | mmol gCD W⁻¹ d⁻¹ | 95 % | gc-fid | "Production rate (mmol gCD W−1 d−1) Ethanol 0× 0.16 ± 0.11" · T=30°C, pH(an)=7.3, substrate=h2_co2, steady_state | Ausgeschlossen: kein SI-Wert |
| Acetic Acid Concentration | 33 | mM | 95 % | hplc | "Final concentration (mM) Acetate 10× 33.02 ± 1.98" · T=30°C, pH(an)=4.8, substrate=h2_co2, steady_state | Ausgeschlossen: kein SI-Wert |
| Acetic Acid Concentration | 39,9 | mM | 95 % | hplc | "Final concentration (mM) Acetate 0× 39.94 ± 0.21" · T=30°C, pH(an)=4.8, substrate=h2_co2, steady_state | Ausgeschlossen: kein SI-Wert |
| Biomass Concentration | 0,4 | OD | 95 % | optical density measurement at 545 nm | "Final OD545 5× 0.40 ± 0.01" · T=30°C, pH(an)=7.3, substrate=h2_co2, steady_state | Ausgeschlossen: kein SI-Wert |
| Acetic Acid Concentration | 13,2 | mM | 95 % | gc-fid | "Final concentration (mM) Ethanol 10× 13.15 ± 1.18" · T=30°C, pH(an)=4.8, substrate=h2_co2, steady_state | Ausgeschlossen: kein SI-Wert |
| Specific H₂ Production | 8,6 | fold | 95 % | gas fermentation | "Multiplying tungstate concentration by 10 to 0.1 μM in S. ovata 311 growth mediu…" · T=30°C, pH(an)=7.3, substrate=h2_co2, steady_state | Ausgeschlossen: kein SI-Wert |
| Acetate Production Rate | 3,61 | mmol gCD W⁻¹ d⁻¹ | 95 % | hplc | "Production rate (mmol gCD W−1 d−1) Acetate 1× 3.61 ± 0.14" · T=30°C, pH(an)=7.3, substrate=h2_co2, steady_state | Ausgeschlossen: kein SI-Wert |
| Acetate Production Rate | 3,06 | mmol gCD W⁻¹ d⁻¹ | 95 % | hplc | "Production rate (mmol gCD W−1 d−1) Acetate 5× 3.06 ± 0.18" · T=30°C, pH(an)=7.3, substrate=h2_co2, steady_state | Ausgeschlossen: kein SI-Wert |
| Formic Acid Production Rate | 0,71 | mmol gCD W⁻¹ d⁻¹ | 95 % | gc-fid | "Production rate (mmol gCD W−1 d−1) Ethanol 5× 0.71 ± 0.06" · T=30°C, pH(an)=7.3, substrate=h2_co2, steady_state | Ausgeschlossen: kein SI-Wert |
| Acetic Acid Concentration | 10,2 | mM | 95 % | gc-fid | "Final concentration (mM) Ethanol 50× 10.17 ± 3.63" · T=30°C, pH(an)=4.8, substrate=h2_co2, steady_state | Ausgeschlossen: kein SI-Wert |
| Biomass Concentration | 0,45 | OD | 95 % | optical density measurement at 545 nm | "Final OD545 100× 0.45 ± 0.04" · T=30°C, pH(an)=7.3, substrate=h2_co2, steady_state | Ausgeschlossen: kein SI-Wert |
| Acetate Production Rate | 141 | mmol m⁻² day⁻¹ | 95 % | hplc | "The MES production of acetate was increased 4.4-fold from 32.0 ± 1.7 to 141.2 ± …" · T=25°C, pH(an)=7.3, substrate=co2, steady_state | Ausgeschlossen: kein SI-Wert |
| Acetate Production Rate | 32 | mmol m⁻² day⁻¹ | 95 % | hplc | "The MES production of acetate was increased 4.4-fold from 32.0 ± 1.7 to 141.2 ± …" · T=25°C, pH(an)=7.3, substrate=co2, steady_state | Ausgeschlossen: kein SI-Wert |
| Doubling Time | 28 | h | 95 % | optical density measurement | "Doubling time (h) 50× 28.03 ± 0.35" · T=30°C, pH(an)=7.3, substrate=h2_co2 | Modellierbar |
| Reactor Volume | 300 | ml | 95 % | extrahiert | "The cathodic chamber and the anodic chamber were filled with a final volume of 3…" · condition_hint=MES reactor design parameter | Modellierbar |
| Acetic Acid Concentration | 34,1 | mM | 95 % | hplc | "Final concentration (mM) Acetate 100× 34.08 ± 1.32" · T=30°C, pH(an)=4.8, substrate=h2_co2, steady_state | Ausgeschlossen: kein SI-Wert |
Methodik
Welches System und wie es betrieben wurde
Betriebsbedingungen
11 Läufe extrahiert| Lauf | T°C | pHAnolyt | pHKatholyt | Substrat | [S]mg/L | HRTh | Modus | R_extΩ | V_appV | Inokulum |
|---|---|---|---|---|---|---|---|---|---|---|
| v2-70d7499a675f0871 | 30 | 7.3 | — | h2_co2 | — | — | startup | — | — | — |
| v2-86347811c38afbfc | 30 | 7.3 | — | h2_co2 | — | — | steady_state | — | — | — |
| v2-9aeea3406a5d050f | 30 | 7.3 | — | h2_co2_with_butyrate | 5000 | — | steady_state | — | — | — |
| v2-9e715f3576445e46 | 25 | — | — | — | 10000 | — | — | — | — | — |
| v2-a56592a393693b6f | 25 | — | — | co2 | — | — | steady_state | — | -0.69 | — |
| v2-aa7d867e68867e07 | 30 | 4.8 | — | h2_co2 | — | — | steady_state | — | — | — |
| v2-bfa25cdb6fe5e053 | — | — | — | — | — | — | — | — | -0.69 | — |
| v2-d1ebbc21c41069b6 | 30 | 7.3 | — | h2_co2 | — | — | — | — | — | — |
| v2-d55d9d6660cba025 | 30 | 7.3 | — | h2_co2_with_propionate | 5000 | — | steady_state | — | — | — |
| v2-eeefa5a59d768342 | 25 | 7.3 | — | co2 | 5000 | — | steady_state | — | -0.69 | — |
| v2-f586e9af22985397 | — | — | — | — | — | — | — | — | — | — |
Extraktionspipeline
Rohextraktionen, Artefakte, Qualitätssignal
Extraktionsqualität
EhrlichkeitssignalBemessen Sie Ihr Vertrauen in die extrahierten Inhalte an diesen Signalen – so hat die Pipeline ihre eigene Ausgabe für diese Publikation bewertet.
KI-Konfidenz
60 %
Vom Modell selbst angegebene Konfidenz
Mittlere Parameterkonfidenz
95 %
Durchschnittliche Konfidenz der oben angezeigten PaperParameter-Zeilen
vor dem Zitieren mit dem Quell-PDF abgleichen · Werte 0–1
Diagramm-Explorer
Verändern Sie die Eingaben dieser Publikation und sehen Sie, wie sich das vorhergesagte Ergebnis verschiebt.
Modell erkunden
Der Reaktor in 3D, mit Strömung, die sich ein- und ausschalten lässt.
KI-Erkenntnisse
Widersprüche, Lücken und Chancen aus dem Vergleich dieser Publikation mit dem Korpus.
Ähnliche Publikationen vergleichen
Die nächsten Publikationen nach System, Materialien und Organismen, mit ihren Ergebnissen nebeneinander.
Quell-PDF
Die Publikation, wie sie erschienen ist.
Repräsentatives Modell, generisches mikrobielles elektrochemisches System
Zum Interagieren tippenRepräsentatives Modell, generisches mikrobielles elektrochemisches System
Repräsentatives Modell: mikrobielles elektrochemisches System – zugeordnet nur anhand des Systemtyps der Publikation, nicht ihres Reaktors oder ihrer Geometrie.
In diesem Datensatz
Organismen, Parameter und Materialien, die diese Publikation berichtet. Jeder Eintrag verweist auf seine Seite.
Organismen · 1
Schlagwörter
- Tungstate
- Bacteria
- Ethanol
- Ethanol fuel
- Biotechnology
- Microbiology
Zitieren
Fariza Ammam, Pier‐Luc Tremblay, Dawid Mariusz Lizak et al. (2016). Effect of tungstate on acetate and ethanol production by the electrosynthetic bacterium Sporomusa ovata. Biotechnology for Biofuels. https://doi.org/10.1186/s13068-016-0576-0
- PubMed
- 27493685
- Zeitschrift
- Biotechnology for Biofuels
Öffnen Sie das Modell im Labor, um alle Steuerelemente, die Parameterbearbeitung und Vorlagen-Overlays zu nutzen.
Im Labor öffnen