Forschungsdaten – Titel und Zusammenfassungen von Publikationen, extrahierte Daten und Katalogeinträge – erscheinen in ihrer Originalsprache Englisch.
Publikation
Biologically Induced Hydrogen Production Drives High Rate/High Efficiency Microbial Electrosynthesis of Acetate from Carbon Dioxide
Zusammenfassung
Was die Publikation berichtet, in ihren eigenen Worten.
Zusammenfassung
Abstract Electron‐transfer pathways occurring in biocathodes are still unknown. We demonstrate here that high rates of acetate production by microbial electrosynthesis are mainly driven by an electron flux from the electrode to carbon dioxide, occurring via biologically induced hydrogen, with (99±1) % electron recovery into acetate. Nevertheless, acetate production is shown to occur exclusively within the biofilm. The acetate producers, putatively Acetoanaerobium , showed the remarkable ability to consume a high H 2 flux before it could escape from the biofilm. At zero wastage of H 2 gas, it allows superior production rates and lesser technical bottlenecks over technologies that rely on mass transfer of H 2 to microorganisms suspended in aqueous solution. This study suggests that bacterial modification of the electrode surface (possibly via synthesis of Cu nanoparticles) is directly involved in the significant enhancement of the hydrogen production.
KI-Zusammenfassung
100 % KonfidenzSpecialized MES research in optimization focusing on performance-optimization, substrates. Abstract Electron‐transfer pathways occurring in biocathodes are still unknown. We demonstrate her...
Erstellt von der MESSAI-Extraktionspipeline · mit dem Quell-PDF abgleichen
Extrahierte Werte
Jeder aus der Publikation entnommene Wert mit seiner Quelle, damit sich jede Zahl am Text prüfen lässt.
n = 53 extrahierte Werte
Wählen Sie eine Quellenangabe, um Zitat, Seite und Konfidenz hinter einem Wert zu sehen.
26 von 52 extrahierten Zeilen modellierbar
- 18 nicht kanonisiert (kein kanonischer Slug)
- 8 kein SI-Wert
| Parameter | Wert | Einheit | Konfidenz | Quelle | Anmerkungen | Modellierbar |
|---|---|---|---|---|---|---|
| Substrate | acetate | — | 80 % | llm | ||
| Minimum read length after trimming | 190 | bp | 95 % | 16s rrna amplicon sequencing | "Raw paired reads was first trimmed by Trimmomatic to remove short reads (less th…" · condition_hint=sequencing data processing parameter | Ausgeschlossen: nicht kanonisiert (kein kanonischer Slug) |
| Helium carrier gas flow rate | 200 | mL min⁻¹ | 95 % | extrahiert | "Helium (Ultra high purity, BOC, Australia) was used as carrier gas and supplied …" · T=31°C | Ausgeschlossen: nicht kanonisiert (kein kanonischer Slug) |
| Electron Recovery Efficiency | 98 | % | 95 % | chronoamperometry | "The CO2 and electron recovery in this study was up to 98 ± 3 % into the final pr…" · T=31°C, substrate=co2, steady_state | Modellierbar |
| Formic Acid Production Rate | 66 | kg m⁻³ electrode day⁻¹ | 95 % | chronoamperometry | "equivalent to 66 kg m-3 electrode day-1" · T=31°C, substrate=co2, steady_state | Ausgeschlossen: kein SI-Wert |
| Specific H₂ Production | 115 | m³ H₂ m⁻³ electrode day⁻¹ | 95 % | chronoamperometry with toga sensor | "Due to the 3D nature of the electrodes (2620 m2 m-3), this rate translates to 11…" · T=31°C, pH(an)=6.7, substrate=co2, steady_state | Ausgeschlossen: kein SI-Wert |
| Current Density (Basis Unresolved) | 102 | A m⁻² | 95 % | chronoamperometry | "we reported a high biocathode current density of up to -102 A m-2" · T=31°C, substrate=co2, steady_state | Modellierbar |
| SEM acceleration voltage | 20Außerhalb des physikalischen Bereichs, Quelle prüfen | kV | 95 % | sem | "Samples were imaged at 20 kV acceleration" · condition_hint=SEM imaging parameter | Ausgeschlossen: nicht kanonisiert (kein kanonischer Slug) |
| Specific H₂ Production | 1,15 | m³ H₂ m⁻² electrode day⁻¹ | 95 % | chronoamperometry with toga sensor | "biologically-induced hydrogen production at high rate (1.15 m3 H2 m-2 electrode …" · T=31°C, pH(an)=6.7, substrate=co2, steady_state | Ausgeschlossen: kein SI-Wert |
| Cathodic Hydrogen Recovery | 95 | % | 95 % | chronoamperometry with toga sensor | "electron recovery into H2 as the end-product went up to 95 ± 3%" · T=31°C, pH(an)=6.7, steady_state | Modellierbar |
| Acetic Acid Concentration | 11 | g L⁻¹ | 95 % | chronoamperometry | "a high acetic acid titer of up to 11 g L-1 could be reached" · T=31°C, substrate=co2, steady_state | Modellierbar |
| Electron Recovery Efficiency | 99 | % | 95 % | chronoamperometry with toga sensor | "about 99 ± 1% of the total electrons consumed were assimilated into acetate" · T=31°C, pH(an)=6.7, substrate=co2, steady_state | Modellierbar |
| Cyclic Voltammetry Scan Rate | 0,1 | mV s⁻¹ | 95 % | linear sweep voltammetry | "The potential was scanned from 0 to -1.0 V vs. SHE, unless otherwise specified, …" · T=31°C, pH(an)=6.7 | Modellierbar |
| SEM spot size | 6 | dimensionless | 95 % | sem | "6.0 spot size" · condition_hint=SEM imaging parameter | Ausgeschlossen: nicht kanonisiert (kein kanonischer Slug) |
| Electrochemical oxidation duration (first step) | 30 | min | 95 % | cyclic voltammetry | "Both cathodes were then electrochemically oxidized at +0.2 V vs. SHE for 30 min …" · T=31°C, pH(an)=7 | Ausgeschlossen: nicht kanonisiert (kein kanonischer Slug) |
| Coulombic efficiency | 95 | % | 95 % | chronoamperometry with toga sensor | "the performance of these biocathodes reached H2 production rates of about 1.15 m…" · T=31°C, pH(an)=6.7, steady_state | Modellierbar |
| Current Density (Areal) | 2 | A m⁻² | 95 % | chronoamperometry with toga sensor | "Significantly lower, and constant, current density of about -2 A m-2 was recorde…" · T=31°C, pH(an)=6.7, substrate=co2, steady_state | Modellierbar |
| Electrode Surface Area | 2.620 | m² m⁻³ | 95 % | extrahiert | "Due to the 3D nature of the electrodes (2620 m2 m-3)" · condition_hint=design parameter, 3D electrode structure, electrode_material=EPD-3D 45ppi | Ausgeschlossen: kein SI-Wert |
| Electrochemical oxidation duration (third step) | 30 | min | 95 % | cyclic voltammetry | "and finally at +0.4 V vs. SHE for 30 min" · T=31°C, pH(an)=7 | Ausgeschlossen: nicht kanonisiert (kein kanonischer Slug) |
| Temperature control | 31 | °C | 95 % | extrahiert | "The temperature was controlled at 31 ± 1 ºC throughout all the tests" · T=31°C | Ausgeschlossen: nicht kanonisiert (kein kanonischer Slug) |
| DNA extraction amount | 300 | ng | 95 % | 16s rrna amplicon sequencing | "300 ng DNA of each sample were provided to the Australian Centre for Ecogenomics…" · condition_hint=microbial community analysis parameter | Ausgeschlossen: nicht kanonisiert (kein kanonischer Slug) |
| Electrochemical oxidation duration (second step) | 60 | min | 95 % | cyclic voltammetry | "CVs were recorded after further electrochemical oxidation at +0.2 V vs. SHE for …" · T=31°C, pH(an)=7 | Ausgeschlossen: nicht kanonisiert (kein kanonischer Slug) |
| OTU phylogenetic distance threshold | 1 | % | 95 % | 16s rrna amplicon sequencing | "open-reference OTU picking strategy by uclust at 1% phylogenetic distance" · condition_hint=OTU analysis parameter | Ausgeschlossen: nicht kanonisiert (kein kanonischer Slug) |
| Minimum quality score after trimming | 20 | Phred⁻³³ | 95 % | 16s rrna amplicon sequencing | "low quality (lower than Phred-33 of 20)" · condition_hint=sequencing data processing parameter | Ausgeschlossen: nicht kanonisiert (kein kanonischer Slug) |
| OTU normalization reads per sample | 40.000 | reads | 95 % | 16s rrna amplicon sequencing | "In house script "Normaliser" (https://github.com/minillinim/Normaliser) was used…" · condition_hint=OTU analysis parameter | Ausgeschlossen: nicht kanonisiert (kein kanonischer Slug) |
Methodik
Welches System und wie es betrieben wurde
Methodik
Methodology
The study employed microbial electrosynthesis to produce acetate from carbon dioxide, utilizing a biocathode with a biofilm that consumes hydrogen gas produced by the electrode.
Leistungskennzahlen
| Feld | Wert |
|---|---|
| citation count | 131 |
Betriebsparameter
| Feld | Wert |
|---|---|
| substrate | ["acetate"] |
Betriebsbedingungen
21 Läufe extrahiert| Lauf | T°C | pHAnolyt | pHKatholyt | Substrat | [S]mg/L | HRTh | Modus | R_extΩ | V_appV | Inokulum |
|---|---|---|---|---|---|---|---|---|---|---|
| v2-06344b74cd051acb | 31 | 6.7 | — | co2 | — | — | steady_state | — | -0.85 | — |
| v2-070866d2c14cc180 | 31 | 2 | — | — | — | — | — | — | — | — |
| v2-1de8f27b051b5ff5 | 31 | 7 | — | — | — | — | — | — | 0.4 | — |
| v2-2b65ad59ab9af497 | — | 7 | — | — | — | — | — | — | — | — |
| v2-3aa9ff9e2ec4e57c | — | — | — | — | — | — | steady_state | — | — | — |
| v2-44ad18a3a137d2b8 | 31 | 7 | — | — | — | — | — | — | — | — |
| v2-534102de825519ad | 31 | 2 | — | co2 | — | — | steady_state | — | -0.85 | — |
| v2-5be26b9552f8552b | 31 | 7 | — | — | — | — | — | — | 0.2 | — |
| v2-5f2d75430d203136 | 31 | 6.7 | — | — | — | — | startup | — | — | — |
| v2-6678733ebc70b516 | 31 | 6.7 | — | — | — | — | steady_state | — | -0.85 | — |
| v2-766323c3352cf469 | — | 6.7 | — | — | — | — | — | — | — | — |
| v2-92657e6938685e1b | 31 | — | — | co2 | — | — | steady_state | — | -0.85 | — |
| v2-a3119cb8665620e2 | — | — | — | — | — | — | startup | — | — | — |
| v2-b80eddf41eaff0af | — | 6.7 | — | — | — | — | transient | — | — | — |
| v2-ce2c8c3219e0ddbd | — | 2 | — | — | — | — | — | — | — | — |
| v2-d9d826f5f2b80625 | 31 | — | — | co2 | — | — | — | — | — | — |
| v2-dc4ed55eb4b85854 | 31 | 6.7 | — | — | — | — | — | — | — | — |
| v2-dfb01de5f320a250 | 31 | — | — | — | — | — | — | — | — | — |
| v2-e51fd061a14d18dd | — | 2 | — | — | — | — | steady_state | — | — | — |
| v2-f586e9af22985397 | — | — | — | — | — | — | — | — | — | — |
| v2-f747bbef84e660e4 | — | 6.7 | — | — | — | — | steady_state | — | — | — |
Extraktionspipeline
Rohextraktionen, Artefakte, Qualitätssignal
Extraktionsqualität
EhrlichkeitssignalBemessen Sie Ihr Vertrauen in die extrahierten Inhalte an diesen Signalen – so hat die Pipeline ihre eigene Ausgabe für diese Publikation bewertet.
Parametervollständigkeit
38 %
Anteil der erwarteten Parameter, die extrahiert wurden
Datenvollständigkeit
60 %
Gesamtabdeckung der Extraktion über alle Felder
KI-Konfidenz
100 %
Vom Modell selbst angegebene Konfidenz
Mittlere Parameterkonfidenz
90 %
Durchschnittliche Konfidenz der oben angezeigten PaperParameter-Zeilen
vor dem Zitieren mit dem Quell-PDF abgleichen · Werte 0–1
Diagramm-Explorer
Verändern Sie die Eingaben dieser Publikation und sehen Sie, wie sich das vorhergesagte Ergebnis verschiebt.
Modell erkunden
Der Reaktor in 3D, mit Strömung, die sich ein- und ausschalten lässt.
KI-Erkenntnisse
Widersprüche, Lücken und Chancen aus dem Vergleich dieser Publikation mit dem Korpus.
Ähnliche Publikationen vergleichen
Die nächsten Publikationen nach System, Materialien und Organismen, mit ihren Ergebnissen nebeneinander.
Quell-PDF
Die Publikation, wie sie erschienen ist.
Dieser Publikation ist noch kein 3D-Modell zugeordnet. Die daraus extrahierten Werte stehen unter „Extrahierte Werte“.
Schlagwörter
- Electrosynthesis
- Carbon dioxide
- Hydrogen production
- Biofilm
- Electron transfer
- Chemical engineering
Zitieren
Ludovic Jourdin, Yang Lu, Victoria Flexer et al. (2016). Biologically Induced Hydrogen Production Drives High Rate/High Efficiency Microbial Electrosynthesis of Acetate from Carbon Dioxide. ChemElectroChem. https://doi.org/10.1002/celc.201500530
- Zeitschrift
- ChemElectroChem