Paper · MFC
Construction of conductive modified polyethylene terephthalate-supported cathode in microbial fuel cell for nitrate removal.
Summary
What the paper reports, in its own words.
Abstract
Polyethylene terephthalate (PET) has broad environmental applications, yet its inherent poor conductivity limits its utility in microbial fuel cell (MFC). This study addressed the need for cost-effective and conductive PET-supported materials. In this study, PET-supported three-dimensional materials were used as a substrate, introducing the conductive coating layer that enhanced hydrophilicity, electrochemically active surface area, and decreased charge transfer resistance. The PET-supported cathode modified with polypyrrole (PPy) and carbon nanotubes (CNTs) achieved a maximal power density (758.2 mW/m 2 ) with long-term operational stability for 4 months. The PET/PPy/CNTs cathode exhibited 2.23-fold higher nitrate removal efficiency than carbon felt cathode. Notably, the average viability of biofilm on the internal surface of PET/PPy/CNTs (63.5%) was 2.89-fold higher than carbon felt. Furthermore, the PET/PPy/CNTs demonstrated significant cost-effectiveness with a cost of approximately $2.04/m 2 . Considering the superior bioelectrochemical performance, low costs, and low life cycle environmental impacts, the PET-supported cathode demonstrates notable potential for enhancing MFC performance.
AI summary
75% confidenceThis study developed a conductive modified polyethylene terephthalate (PET)-supported cathode for microbial fuel cells, achieving high power density and long-term operational stability. The PET-supported cathode modified with polypyrrole and carbon nanotubes showed improved nitrate removal efficiency and biofilm viability. The study demonstrates a cost-effective and environmentally friendly approach for wastewater treatment.
Generated by MESSAI extraction pipeline · review against source PDF
Extracted values
Every value pulled from the paper, with its source, so each number can be checked against the text.
n = 3 extracted values
Select a citation to see the quote, page and confidence behind a value.
0 of 3 extracted rows modelable
- 1 not canonicalised (no canonical slug)
- 2 no SI value
| Parameter | Value | Unit | Confidence | Source | Modelable |
|---|---|---|---|---|---|
| Electrode material | carbon felt | — | 50% | extracted | Excluded: not canonicalised (no canonical slug) |
| Maximum power density | 758 | mW/m² | 50% | extracted | Excluded: no SI value |
| Cathode material | PET/PPy/CNTs | — | 50% | extracted | Excluded: no SI value |
Methodology
What was the system and how was it run
Methodology
Methodology
The study used PET-supported three-dimensional materials with a conductive coating layer, introducing polypyrrole and carbon nanotubes to enhance hydrophilicity and electrochemically active surface area.
Electrode specifications
| Field | Value |
|---|---|
| materials | ["carbon felt","carbon nanotube","CNT"] |
Pipeline
Raw extractions, artifacts, quality signal
Extraction quality
honesty signalCalibrate your trust in the extracted content against these signals — they're how the pipeline rated its own output for this paper.
Parameter completeness
13%
Fraction of expected parameters extracted
Data completeness
30%
Overall extraction coverage across fields
AI confidence
75%
Model self-reported confidence
Mean parameter confidence
50%
Average confidence across PaperParameter rows surfaced above
review against source PDF before citing · scores 0–1
Chart explorer
Move the inputs this paper used and see how the predicted outcome shifts.
Explore model
The reactor in 3D, with flow you can switch on and off.
AI insights
Contradictions, gaps and opportunities found by comparing this paper with the corpus.
Compare similar papers
The nearest papers by system, materials and organisms, with their outcomes side by side.
Representative model, generic MFC
Tap to interactRepresentative model, generic MFC
Representative MFC — matched on the paper’s system type only, not its reactor or geometry.
Keywords
- Biofilm viability
- Cost effectiveness
- Electro-autotrophic denitrification
- Microbial electrochemical system
Cite
(2026). Construction of conductive modified polyethylene terephthalate-supported cathode in microbial fuel cell for nitrate removal. Bioresource technology. https://doi.org/10.1016/j.biortech.2026.134050
- PubMed
- 41565041
- Journal
- Bioresource technology
Open in lab for full controls, parameter editing, and template overlays.
Open in lab