Research

Paper · MEC

Performance and microbial community analysis on nitrate removal in a bioelectrochemical reactor

01

Summary

What the paper reports, in its own words.

3D Interactive ModelAI Enhanced· 90%

Abstract

In this experiment, we took reflux sludge, sludge from an aeration tank, and soil from roots as microbial inoculating sources for an electrochemical device for denitrification with high-throughput sequencing on cathodic biofilms. The efficiency of nitrate nitrogen removal using different microbial inoculates varied among voltages. The optimal voltages for denitrification of reflux sludge, aeration tank sludge, and root soil were 0.7V, 0.5V, and 0.5V, respectively. Further analysis revealed that the respective voltages had a significant effect upon microbial growth from the respective inoculates. Proteobacteria and Firmicutes were the main denitrifying microbes. With the addition of low current (produced by the applied voltage), the Chao1, Shannon and Simpson indexes of the diversity of microorganisms in soil inoculation sources increased, indicating that low current can increase the diversity and richness of the microorganisms, while the reflux sludge and aeration tank sludge showed different changes. Low-current stimulation decreased microbial diversity to a certain extent. Pseudomonas showed a trend of decline with increasing applied voltage, in which the MEC (microbial electrolysis cell) of rhizosphere soil as inoculates decreased most significantly from 77.05% to 12.58%, while the MEC of Fusibacter showed a significant increase, and the sludge of reflux sludge, aeration tank and rhizosphere soil increased by 31.12%, 18.7% and 34.6%, respectively. The applied voltage also significantly increased the abundance of Azoarcus in communities from the respective inoculates.

AI summary

90% confidence

MEC research with standard focus on standard. In this experiment, we took reflux sludge, sludge from an aeration tank, and soil from roots as microbial inocul...

Generated by MESSAI extraction pipeline · review against source PDF

02

Extracted values

Every value pulled from the paper, with its source, so each number can be checked against the text.

n = 14 extracted values

Select a citation to see the quote, page and confidence behind a value.

2 of 14 extracted rows modelable

  • 1 not canonicalised (no canonical slug)
  • 2 no SI value
  • 9 outside physical bounds
ParameterValueUnitConfidenceSourceNotesModelable
Inoculum sourcesoil—80%
extracted
Excluded: no SI value
Dominant organismPseudomonas—80%
extracted
Excluded: not canonicalised (no canonical slug)
pH7null65%
extracted
"Nitrate removal performance varied with different microbial inoculates at differ…"Excluded: no SI value
pH11,400Outside physical range, check source-60%
extracted
"ol. 2017; 102: 41–48. https://doi.org/10."Excluded: outside physical bounds
pH9,180Outside physical range, check source-60%
extracted
"ol. 2017; 102: 41–48. https://doi.org/10."Excluded: outside physical bounds
pH3-60%
extracted
"a possible"Modelable
pH3,000Outside physical range, check source-60%
extracted
"s11274-021-03001-w PMID: 33544217"Excluded: outside physical bounds
pH17Outside physical range, check source-60%
extracted
"ol. 2017; 102: 41–48. https://doi.org/10."Excluded: outside physical bounds
pH11,300Outside physical range, check source-60%
extracted
"s11274-021-03001-w PMID: 33544217"Excluded: outside physical bounds
pH9,490Outside physical range, check source-60%
extracted
"76: 160–170. https://doi.org/10.1016/j."Excluded: outside physical bounds
pH454Outside physical range, check source-60%
extracted
"d by 454-pyrosequencing analysis. Bioresour. Technol. 2012; 117: 72–79. https://…"Excluded: outside physical bounds
pH21Outside physical range, check source-60%
extracted
"s11274-021-03001-w PMID: 33544217"Excluded: outside physical bounds
pH9-60%
extracted
"76: 160–170. https://doi.org/10.1016/j."Modelable
pH248Outside physical range, check source-60%
extracted
"76: 160–170. https://doi.org/10.1016/j."Excluded: outside physical bounds

Methodology

What was the system and how was it run

Methodology

Methodology

The study employed a bioelectrochemical reactor with different microbial inoculates (reflux sludge, aeration tank sludge, and root soil) and varying voltages to analyze nitrate removal efficiency and microbial community.

Biological parameters

FieldValue
inoculum sourcesoil
dominant species["Pseudomonas"]

Performance metrics

FieldValue
citation count1

Pipeline

Raw extractions, artifacts, quality signal

Extraction quality

honesty signal

Calibrate your trust in the extracted content against these signals — they're how the pipeline rated its own output for this paper.

Parameter completeness

25%

Fraction of expected parameters extracted

Data completeness

40%

Overall extraction coverage across fields

AI confidence

90%

Model self-reported confidence

Mean parameter confidence

63%

Average confidence across PaperParameter rows surfaced above

review against source PDF before citing · scores 0–1

03

Chart explorer

Move the inputs this paper used and see how the predicted outcome shifts.

04

Explore model

The reactor in 3D, with flow you can switch on and off.

05

AI insights

Contradictions, gaps and opportunities found by comparing this paper with the corpus.

06

Compare similar papers

The nearest papers by system, materials and organisms, with their outcomes side by side.

loading 3D model…

Representative model, generic MEC

Representative MEC — matched on the paper’s system type only, not its reactor or geometry.

MEC
System
14
Extracted values
2023
Year

Keywords

  • Denitrifying bacteria
  • Aeration
  • Nitrate
  • Denitrification
  • Rhizosphere
  • Microorganism

Cite

Han Li, Ying Cui, Fei Wang et al. (2023). Performance and microbial community analysis on nitrate removal in a bioelectrochemical reactor. PLOS ONE. https://doi.org/10.1371/journal.pone.0290660

Journal
PLOS ONE

Open in lab for full controls, parameter editing, and template overlays.

Open in lab