Paper · MFC
Influence of carbon-based cathodes on biofilm composition and electrochemical performance in soil microbial fuel cells
Summary
What the paper reports, in its own words.
Abstract
Increasing energy demands and environmental pollution concerns press for sustainable and environmentally friendly technologies. Soil microbial fuel cell (SMFC) technology has great potential for carbon-neutral bioenergy generation and self-powered electrochemical bioremediation. In this study, an in-depth assessment on the effect of several carbon-based cathode materials on the electrochemical performance of SMFCs is provided for the first time. An innovative carbon nanofibers electrode doped with Fe (CNFFe) is used as cathode material in membrane-less SMFCs, and the performance of the resulting device is compared with SMFCs implementing either Pt-doped carbon cloth (PtC), carbon cloth, or graphite felt (GF) as the cathode. Electrochemical analyses are integrated with microbial analyses to assess the impact on both electrogenesis and microbial composition of the anodic and cathodic biofilm. The results show that CNFFe and PtC generate very stable performances, with a peak power density (with respect to the cathode geometric area) of 25.5 and 30.4 mW m -2 , respectively. The best electrochemical performance was obtained with GF, with a peak power density of 87.3 mW m -2 . Taxonomic profiling of the microbial communities revealed differences between anodic and cathodic communities. The anodes were predominantly enriched with Geobacter and Pseudomonas species, while cathodic communities were dominated by hydrogen-producing and hydrogenotrophic bacteria, indicating H 2 cycling as a possible electron transfer mechanism. The presence of nitrate-reducing bacteria, combined with the results of cyclic voltammograms, suggests microbial nitrate reduction occurred on GF cathodes. The results of this study can contribute to the development of effective SMFC design strategies for field implementation.
Extracted values
Every value pulled from the paper, with its source, so each number can be checked against the text.
n = 57 extracted values
Select a citation to see the quote, page and confidence behind a value.
29 of 57 extracted rows modelable
- 10 not canonicalised (no canonical slug)
- 5 no SI value
- 11 not marked applicable to modeling
- 2 contradicts other papers
| Parameter | Value | Unit | Confidence | Source | Notes | Modelable |
|---|---|---|---|---|---|---|
| Power Density (Basis Unresolved) | 25.5 | mW m⁻² | 95% | polarization curve | "The results show that CNFFe and PtC generate very stable performances, with a pe…" · pH(an)=7.2, substrate=soil organic matter, steady_state | Modelable |
| Power Density (Basis Unresolved) | 87.3 | mW m⁻² | 95% | polarization curve | "In particular, SMFC-GF generated a peak power of 0.43 ± 0.009 mW, corresponding …" · pH(an)=7.2, substrate=soil organic matter, steady_state | Modelable |
| Volatile Solids | 39 | % | 95% | soil analysis | "The physicochemical properties of the soil were assessed by an external company …" · pH(an)=7.2, substrate=soil organic matter | Excluded: no SI value |
| Catalyst Loading | 0.2 | mg cm⁻² | 95% | extracted | "carbon cloth doped with Pt (Pt loading: 0.2 mg cm−2)" · condition_hint=SMFC design parameter, electrode_material=Pt-doped carbon cloth (PtC) | Excluded: no SI value |
| Power Density (Basis Unresolved) | 4.29 | mW m⁻² | 95% | polarization curve | "The lowest power was generated by SMFC-CC (0.021 mW, with a power density 4.285 …" · pH(an)=7.2, substrate=soil organic matter, steady_state | Modelable |
| Power Density (Basis Unresolved) | 30.4 | mW m⁻² | 95% | polarization curve | "The results show that CNFFe and PtC generate very stable performances, with a pe…" · pH(an)=7.2, substrate=soil organic matter, steady_state | Modelable |
| Soil Electrical Conductivity | 1,090 | mS cm⁻¹ | 95% | soil analysis | "The physicochemical properties of the soil were assessed by an external company …" · pH(an)=7.2, substrate=soil organic matter | Excluded: not canonicalised (no canonical slug) |
| Electrode Spacing | 4 | cm | 95% | extracted | "The SMFCs consisted of an anode buried in the soil and a cathode exposed to air …" · condition_hint=SMFC design parameter | Modelable |
| Total Organic Carbon | 14 | % | 95% | soil analysis | "The physicochemical properties of the soil were assessed by an external company …" · pH(an)=7.2, substrate=soil organic matter | Excluded: no SI value |
| Electrode Surface Area | 7 | cm | 95% | extracted | "the cathode (7 × 7 × 0.4 cm) was encased between two sheets of titanium mesh" · condition_hint=SMFC design parameter, cathode length/width | Excluded: no SI value |
| Electrode Surface Area | 7 | cm | 95% | extracted | "The anode (graphite felt, 7 × 7 × 0.4 cm)" · condition_hint=SMFC design parameter, anode length/width, electrode_material=graphite felt | Excluded: no SI value |
| Ohmic Resistance | 112 | Ω | 90% | eis | "Values of different circuit elements are reported in Table 1." · pH(an)=7.2, substrate=soil organic matter, steady_state | Modelable |
| Ohmic Resistance | 224 | Ω | 90% | eis | "Values of different circuit elements are reported in Table 1." · pH(an)=7.2, substrate=soil organic matter, steady_state | Modelable |
| Ohmic Resistance | 92.2 | Ω | 90% | eis | "Values of different circuit elements are reported in Table 1." · pH(an)=7.2, substrate=soil organic matter, steady_state | Modelable |
| Voltage | 0.241 ± 0.038 (SD) | V | 90% | voltage monitoring | "The performances of SMFC-CNFFe and SMFC-PtC were very similar, with steady outpu…" · pH(an)=7.2, substrate=soil organic matter, steady_state | Modelable |
| Ohmic Resistance | 409 | Ω | 90% | eis | "At the start of the experiment, RU values for all the electrodes (solid symbols …" · pH(an)=7.2, substrate=soil organic matter, startup | Modelable |
| Ohmic Resistance | 87.3 | Ω | 90% | eis | "Values of different circuit elements are reported in Table 1. At the end of the …" · pH(an)=7.2, substrate=soil organic matter, steady_state | Modelable |
| Ohmic Resistance | 295 | Ω | 90% | eis | "At the start of the experiment, RU values for all the electrodes (solid symbols …" · pH(an)=7.2, substrate=soil organic matter, startup | Modelable |
| Voltage | 0.244 ± 0.033 (SD) | V | 90% | voltage monitoring | "The performances of SMFC-CNFFe and SMFC-PtC were very similar, with steady outpu…" · pH(an)=7.2, substrate=soil organic matter, steady_state | Modelable |
| Voltage | 0.086 ± 0.03 (SD) | V | 90% | voltage monitoring | "the use of carbon cloth as the cathode led to the poorest performance; the outpu…" · pH(an)=7.2, substrate=soil organic matter, steady_state | Modelable |
| Cathode Potential | -0.321 ± 0.014 (SD) | V | 90% | potentiometry | "while the cathode potentials for carboncloth was 0.321 ± 0.014 V, suggesting a l…" · pH(an)=7.2, substrate=soil organic matter, steady_state | Excluded: not marked applicable to modeling |
| Anode Potential | -0.408 ± 0.014 (SD) | V | 90% | potentiometry | "after about 10 days of operation, the anode potential vs Ag/AgCl stabilises at 0…" · pH(an)=7.2, substrate=soil organic matter, steady_state | Excluded: not marked applicable to modeling |
| Anode Potential | -0.355 ± 0.043 (SD) | V | 90% | potentiometry | "after about 10 days of operation, the anode potential vs Ag/AgCl stabilises at 0…" · pH(an)=7.2, substrate=soil organic matter, steady_state | Excluded: not marked applicable to modeling |
| Cathode Potential | -0.121 ± 0.031 (SD) | V | 90% | potentiometry | "The cathode potentials (Fig. 2c) of CNFeFe and PtC were similar (0.121 ± 0.031 a…" · pH(an)=7.2, substrate=soil organic matter, steady_state | Excluded: not marked applicable to modeling |
| Anode Potential | -0.365 ± 0.024 (SD) | V | 90% | potentiometry | "after about 10 days of operation, the anode potential vs Ag/AgCl stabilises at 0…" · pH(an)=7.2, substrate=soil organic matter, steady_state | Excluded: not marked applicable to modeling |
Methodology
What was the system and how was it run
Operating conditions
3 runs extracted| Run | T°C | pHan | pHcat | Substrate | [S]mg/L | HRTh | Mode | R_extΩ | V_appV | Inoculum |
|---|---|---|---|---|---|---|---|---|---|---|
| v2-34dea0dfaa220134 | — | 7.2 | — | soil organic matter | — | — | — | — | — | — |
| v2-973022fb84f8c478 | — | 7.2 | — | soil organic matter | — | — | startup | 500 | — | — |
| v2-fb8fb2199dc8ef7d | — | 7.2 | — | soil organic matter | — | — | steady_state | 500 | — | — |
Pipeline
Raw extractions, artifacts, quality signal
Extraction quality
honesty signalCalibrate your trust in the extracted content against these signals — they're how the pipeline rated its own output for this paper.
AI confidence
60%
Model self-reported confidence
Mean parameter confidence
86%
Average confidence across PaperParameter rows surfaced above
review against source PDF before citing · scores 0–1
Chart explorer
Move the inputs this paper used and see how the predicted outcome shifts.
Explore model
The reactor in 3D, with flow you can switch on and off.
AI insights
Contradictions, gaps and opportunities found by comparing this paper with the corpus.
Compare similar papers
The nearest papers by system, materials and organisms, with their outcomes side by side.
Source PDF
The paper as published.
Representative model, generic MFC
Tap to interactRepresentative model, generic MFC
Representative MFC — matched on the paper’s system type only, not its reactor or geometry.
Keywords
- Microbial fuel cell
- Biofilm
- Electrochemistry
- Composition (language)
- Cathode
- Carbon fibers
Cite
Arpita Nandy, Daniel Farkas, Belén Pepió‐Tárrega et al. (2023). Influence of carbon-based cathodes on biofilm composition and electrochemical performance in soil microbial fuel cells. Environmental Science and Ecotechnology. https://doi.org/10.1016/j.ese.2023.100276
- PubMed
- 37206316
Open in lab for full controls, parameter editing, and template overlays.
Open in lab