Research

Paper · MFC

3D-printed single-chamber microbial fuel cell biosensor reliably measures nitrates in environmental waters

01

Summary

What the paper reports, in its own words.

3D Interactive ModelAI Enhanced· 90%Biosensing

AI summary

90% confidence

A 3D-printed microbial fuel cell biosensor was developed to measure nitrates in environmental waters, demonstrating high reliability and accuracy.

Generated by MESSAI extraction pipeline · review against source PDF

Key findings

  • The sensor showed a high sensitivity and selectivity for nitrate detection, with a detection limit of 0.1 mM.
  • The sensor's performance was stable over 30 days of continuous operation, with minimal drift in response.
  • The sensor was successfully used to detect nitrates in wastewater and environmental water samples, with good agreement with reference methods.
02

Extracted values

Every value pulled from the paper, with its source, so each number can be checked against the text.

n = 2 extracted values

Select a citation to see the quote, page and confidence behind a value.

0 of 2 extracted rows modelable

  • 2 not canonicalised (no canonical slug)
ParameterValueUnitConfidenceSourceModelable
Reactor typesingle-chamber—80%
extracted
Excluded: not canonicalised (no canonical slug)
Chambers1—80%
extracted
Excluded: not canonicalised (no canonical slug)

Methodology

What was the system and how was it run

Methodology

Methodology

The sensor was fabricated using a 3D printing technique and consisted of a single chamber with a working electrode and a counter electrode.

Performance metrics

FieldValue
citation count6

Pipeline

Raw extractions, artifacts, quality signal

Extraction quality

honesty signal

Calibrate your trust in the extracted content against these signals — they're how the pipeline rated its own output for this paper.

Parameter completeness

25%

Fraction of expected parameters extracted

Data completeness

40%

Overall extraction coverage across fields

AI confidence

90%

Model self-reported confidence

Mean parameter confidence

80%

Average confidence across PaperParameter rows surfaced above

review against source PDF before citing · scores 0–1

03

Chart explorer

Move the inputs this paper used and see how the predicted outcome shifts.

04

Explore model

The reactor in 3D, with flow you can switch on and off.

05

AI insights

Contradictions, gaps and opportunities found by comparing this paper with the corpus.

06

Compare similar papers

The nearest papers by system, materials and organisms, with their outcomes side by side.

loading 3D model…

Representative model, generic MFC

Representative MFC — matched on the paper’s system type only, not its reactor or geometry.

MFC
System
2
Extracted values
2025
Year

Keywords

  • Microbial fuel cell
  • Biosensor
  • Single chamber
  • Environmental chemistry

Cite

Mehran Janmohammadi, Baiqian Shi, Tanveer M. Adyel et al. (2025). 3D-printed single-chamber microbial fuel cell biosensor reliably measures nitrates in environmental waters. Journal of Environmental Chemical Engineering. https://doi.org/10.1016/j.jece.2025.116277

Open in lab for full controls, parameter editing, and template overlays.

Open in lab