Paper · MFC
Application of microbial fuel cell towards bioremediation and clean energy production for industrial wastewater
Summary
What the paper reports, in its own words.
Abstract
A huge amount of wastewater released from industries flow into different water resources such as rivers. Industrial effluents can be regarded as an important resource for water, nutrients and energy. Microbial fuel cell (MFC), a green eco-friendly approach can be applied for the treatment of wastewater with electricity generation concomitantly. It is a novel strategy to generate clean, renewable, safe green energy to maintain a clean environment. MFC technology can be used for effluent treatment, biochemical oxygen demand and chemical oxygen demand elimination, sulphate and removal of toxic metal and denitrification. MFC has an advantage as compared with other wastewater treatment methods because of certain unique properties such as energy and economic benefits, less effect on the environment and high stability. However, the operation of MFCs also has multiple setbacks such as short life span, high cost, membrane fouling and so on. MFC technology shows a pivotal function in solving problems of energy crisis and waste management. This chapter describes current applications of MFC technology for the treatment of industrial effluents with cost-effective energy generation and covers the gap by highlighting key future research areas to improve its performance.
AI summary: matches the abstract (70% confidence) · review against source PDF
Key findings
- MFCs can treat industrial effluents, eliminating biochemical oxygen demand, chemical oxygen demand, sulphate, and toxic metals, and denitrification.
- MFCs have advantages over other wastewater treatment methods due to their energy and economic benefits, and high stability.
Extracted values
Every value pulled from the paper, with its source, so each number can be checked against the text.
n = 1 extracted value
Select a citation to see the quote, page and confidence behind a value.
| Parameter | Value | Unit | Confidence | Source |
|---|---|---|---|---|
| Substrate | wastewater | — | 80% | llm |
Methodology
What was the system and how was it run
Methodology
Methodology
The study describes current applications of MFC technology for industrial effluent treatment with cost-effective energy generation.
Operational parameters
| Field | Value |
|---|---|
| substrate | ["wastewater"] |
Pipeline
Raw extractions, artifacts, quality signal
Extraction quality
honesty signalCalibrate your trust in the extracted content against these signals — they're how the pipeline rated its own output for this paper.
Parameter completeness
25%
Fraction of expected parameters extracted
Data completeness
50%
Overall extraction coverage across fields
AI confidence
70%
Model self-reported confidence
Mean parameter confidence
80%
Average confidence across PaperParameter rows surfaced above
review against source PDF before citing · scores 0–1
Chart explorer
Move the inputs this paper used and see how the predicted outcome shifts.
Explore model
The reactor in 3D, with flow you can switch on and off.
AI insights
Contradictions, gaps and opportunities found by comparing this paper with the corpus.
Compare similar papers
The nearest papers by system, materials and organisms, with their outcomes side by side.
Representative model, generic MFC
Tap to interactRepresentative model, generic MFC
Representative MFC — matched on the paper’s system type only, not its reactor or geometry.
Keywords
- Bioremediation
- Microbial fuel cell
- Waste management
- Production (economics)
- Wastewater
- Industrial wastewater treatment
Cite
Riti Thapar Kapoor, Mohd Rafatullah (2024). Application of microbial fuel cell towards bioremediation and clean energy production for industrial wastewater. Resource Recovery from Industrial Wastewater through Microbial Electrochemical Technologies. https://doi.org/10.2166/9781789063813_0207
Open in lab for full controls, parameter editing, and template overlays.
Open in lab