Research

Paper · MFC

Enhancing microbial adhesion and electron transfer of Shewanella oneidensis MR-1 with polyaniline-glucose-gelatin coating for bioelectrochemical applications

01

Summary

What the paper reports, in its own words.

3D Interactive ModelPower Generation

Abstract

Enhancing bioelectrochemical performance through electrode modifications is critical for advancing microbial fuel cell (MFC) technology. This study investigates the effect of carbon cloth modifications using polyaniline (PANI), glucose, and gelatin on biofilm formation, charge transfer, and microbial viability. Cyclic voltammetry results of initial and 7-day performance demonstrate that PANI-glucose-gelatin-biofilm modified carbon cloth (MCC.B) exhibits highest maximum current and lowest charge transfer resistance when compared with a bare carbon cloth-biofilm system with (CC.G.B) and without (CC.B) the presence of dissolved glucose. Biofilm viability studies reveal that CC.G.B supports predominantly planktonic growth, limiting bacterial adhesion, while MCC.B achieves the highest biofilm formation (90.2 ± 0.2%) and charge storage capacity (174.9 ± 10.2 mC/cm 2 ), corresponding to an approximately 50-fold increase in CSC compared with a bare carbon cloth system (3.3 ± 0.3 mC/cm 2 ), highlighting the synergistic impact of surface modifications and microbial activity. These findings demonstrate that MCC.B facilitates extracellular electron transfer by optimizing bacterial adhesion and nutrient availability, making it a promising candidate for shortening start-up and improving early-stage bioelectrode performance, while longer-term stability remains to be established. This work provides new insights into electrode engineering strategies for maximizing microbial interaction and electrochemical performance in next-generation microbial electrochemical technologies. • Novel electrode modification strategy for microbial fuel cells was developed. • Carbon cloth was modified with polyaniline, glucose, and a protective gelatin layer. • Higher biofilm adhesion and improved cell viability were observed on modified electrodes. • Higher capacitance and lower charge transfer resistance were noted with modified carbon cloth.

02

Extracted values

Every value pulled from the paper, with its source, so each number can be checked against the text.

No PDF on file yet

MESSAI holds the bibliographic record for this paper but not its PDF, so there is no text to extract values from.

03

Chart explorer

Move the inputs this paper used and see how the predicted outcome shifts.

04

Explore model

The reactor in 3D, with flow you can switch on and off.

05

AI insights

Contradictions, gaps and opportunities found by comparing this paper with the corpus.

06

Compare similar papers

The nearest papers by system, materials and organisms, with their outcomes side by side.

loading 3D model…

Representative model, generic MFC

Representative MFC — matched on the paper’s system type only, not its reactor or geometry.

MFC
System
0
Extracted values
2026
Year

In this record

Organisms, parameters and materials this paper reports. Each links to its page.

Keywords

  • Shewanella oneidensis
  • Microbial fuel cell
  • Biofilm
  • Chemical engineering
  • Carbon fibers
  • Electrode

Cite

Kamran Ayaz, Ewa Zabłocka-Godlewska, Abdullah et al. (2026). Enhancing microbial adhesion and electron transfer of Shewanella oneidensis MR-1 with polyaniline-glucose-gelatin coating for bioelectrochemical applications. Journal of environmental chemical engineering. https://doi.org/10.1016/j.jece.2026.121546

Open in lab for full controls, parameter editing, and template overlays.

Open in lab