Research

Paper · MEC

Anodic ammonium oxidation coupling to anammox without external nitrite addition enhanced by carbon granule and supercapacitor.

01

Summary

What the paper reports, in its own words.

3D Interactive ModelAI Enhanced· 75%Wastewater Treatment

Abstract

Microbial electrolytic cell (MEC) can achieve autotrophic nitrogen removal, which is a promising means for treating low C/N ammonium-rich wastewater. However, it still suffers from insufficient ammonium oxidation rate and low total nitrogen (TN) removal. This study optimized the autotrophic nitrogen removal performance of a single-chamber MEC reactor using carbon granule (CG) materials as the bioanode, combined with supercapacitor (SC) as power supply. In the anoxic anodic system with only ammonium as the electron donor, the CG-anode/SC-powered system achieved removal loads of 35.31 ± 4.89 and 27.44 ± 4.80 mg L -1 d -1 for NH 4 + -N and TN, respectively. This TN removal load was 7 and 5.8 times higher than those using carbon felt and carbon brush anodes, respectively, and 2.7 times higher than those using a direct current power supply. Microbial community composition and functional gene abundance analyses showed that the CG anode was occupied by microbes associated with the anaerobic ammonia oxidation (Candidatus_Kuenenia, Ignavibacterium, norank__c__SJA-28, and norank__f__A4b), combined with the key gene abundance increase of hzs and hdh in the anammox pathway. With the lower current and coulomb efficiency of the CG-anode/SC-powered system, it demonstrated that the mechanism on the enhanced nitrogen removal was the electrically driven anodic partial nitrification with electrode as electron acceptor for nitrite production in situ, and then combined with anammox for nitrogen removal. This study constructs a novel autotrophic nitrogen removal system combined with SC-MEC and anammox, providing a viable strategy for the treatment of low C/N ammonium-rich wastewater.

AI summary

75% confidence

This study optimized a single-chamber microbial electrolytic cell (MEC) reactor for autotrophic nitrogen removal from low C/N wastewater, achieving enhanced ammonium oxidation and total nitrogen removal using a carbon granule bioanode and supercapacitor power supply. The system demonstrated improved removal loads for NH4+-N and TN, outperforming other anode materials and power supplies. The optimized system supported a diverse microbial community with key genes for anaerobic ammonia oxidation.

Generated by MESSAI extraction pipeline · review against source PDF

02

Extracted values

Every value pulled from the paper, with its source, so each number can be checked against the text.

n = 6 extracted values

Select a citation to see the quote, page and confidence behind a value.

0 of 6 extracted rows modelable

  • 3 not canonicalised (no canonical slug)
  • 3 no SI value
ParameterValueUnitConfidenceSourceModelable
Reactor typesingle-chamber—80%
extracted
Excluded: not canonicalised (no canonical slug)
Chambers1—80%
extracted
Excluded: not canonicalised (no canonical slug)
Substratewastewater—70%
extracted
Excluded: no SI value
Electrode materialcarbon felt—50%
extracted
Excluded: not canonicalised (no canonical slug)
Substrateammonium—50%
extracted
Excluded: no SI value
Anode materialcarbon granule—50%
extracted
Excluded: no SI value

Methodology

What was the system and how was it run

Methodology

Methodology

The study used a single-chamber MEC reactor with a carbon granule bioanode and supercapacitor power supply to optimize autotrophic nitrogen removal from low C/N wastewater.

Electrode specifications

FieldValue
materials["carbon felt","carbon brush"]

Operational parameters

FieldValue
substrate["wastewater"]

Pipeline

Raw extractions, artifacts, quality signal

Extraction quality

honesty signal

Calibrate your trust in the extracted content against these signals — they're how the pipeline rated its own output for this paper.

Parameter completeness

38%

Fraction of expected parameters extracted

Data completeness

50%

Overall extraction coverage across fields

AI confidence

75%

Model self-reported confidence

Mean parameter confidence

63%

Average confidence across PaperParameter rows surfaced above

review against source PDF before citing · scores 0–1

03

Chart explorer

Move the inputs this paper used and see how the predicted outcome shifts.

04

Explore model

The reactor in 3D, with flow you can switch on and off.

05

AI insights

Contradictions, gaps and opportunities found by comparing this paper with the corpus.

06

Compare similar papers

The nearest papers by system, materials and organisms, with their outcomes side by side.

loading 3D model…

Representative model, generic MEC

Representative MEC — matched on the paper’s system type only, not its reactor or geometry.

MEC
System
6
Extracted values
2026
Year

Keywords

  • Anammox
  • Anodic ammonium oxidation
  • Low C/N wastewater
  • Microbial electrolysis cell
  • Partial nitrification

Cite

(2026). Anodic ammonium oxidation coupling to anammox without external nitrite addition enhanced by carbon granule and supercapacitor. Bioresource technology. https://doi.org/10.1016/j.biortech.2025.133692

PubMed
41274360

Open in lab for full controls, parameter editing, and template overlays.

Open in lab