Paper · MFC
A single-material strategy: graphene sponge bioanode and cathode for Shewanella oneidensis MR-1 microbial fuel cells
Summary
What the paper reports, in its own words.
Abstract
Graphene sponge enables both cathodic and anodic reactions in microbial fuel cells. This free-standing graphene sponge electrode demonstrates high coulombic efficiency and current density.
AI summary
75% confidenceThis MFC study investigates graphene, coulombic efficiency, anode. Key performance metrics include coulombic efficiency, current density.
Generated by MESSAI extraction pipeline · review against source PDF
Extracted values
Every value pulled from the paper, with its source, so each number can be checked against the text.
n = 33 extracted values
Select a citation to see the quote, page and confidence behind a value.
17 of 33 extracted rows modelable
- 2 not canonicalised (no canonical slug)
- 8 no SI value
- 6 outside physical bounds
| Parameter | Value | Unit | Confidence | Source | Notes | Modelable |
|---|---|---|---|---|---|---|
| Tafel Slope | 98 | mV dec⁻¹ | 95% | linear sweep voltammetry | "The ORR activity of the graphene reaches 98 mV dec−1, which is comparable to tha…" · condition_hint=O2-saturated 0.1 M KOH electrolyte, electrode_material=graphene sponge | Modelable |
| Tafel Slope | 169 | mV dec⁻¹ | 95% | linear sweep voltammetry | "As shown in Fig. 3b, the Tafel slope for the ORR of the graphene sponge electrod…" · condition_hint=O2-saturated 0.1 M KOH electrolyte, electrode_material=carbon cloth | Modelable |
| Tafel Slope | 98 | mV dec⁻¹ | 95% | linear sweep voltammetry | "The Tafel slope for the rGO sponge is 98 mV dec−1, which closely aligns with the…" · condition_hint=O2-saturated 0.1 M KOH electrolyte, electrode_material=graphene sponge | Modelable |
| C/O Ratio | 5.51 | — | 95% | x-ray photoelectron spectroscopy | "Mild thermal reduction at 375 °C provides an optimal balance of surface hydrophi…" · condition_hint=reduced at 375 °C, electrode_material=graphene sponge | Excluded: not canonicalised (no canonical slug) |
| Water Contact Angle | 80 | ° | 95% | contact angle measurement | "The smaller number of bacteria on the carbon fiber is due to the high hydrophobi…" · electrode_material=graphene sponge | Excluded: no SI value |
| Charge Transfer Resistance | 96 | Ω | 95% | electrochemical impedance spectroscopy | "As depicted in Fig. 2c the charge transfer resistance for the graphene sponge bi…" · substrate=lactate, steady_state | Modelable |
| Water Contact Angle | 120 | ° | 95% | contact angle measurement | "The smaller number of bacteria on the carbon fiber is due to the high hydrophobi…" · electrode_material=carbon fiber | Excluded: no SI value |
| Water Contact Angle | 78.9 | ° | 95% | contact angle measurement | "Mild thermal reduction at 375 °C provides an optimal balance of surface hydrophi…" · condition_hint=reduced at 375 °C, electrode_material=graphene sponge | Excluded: no SI value |
| Electrical Conductivity | 10.6 | S m⁻¹ | 95% | electrical conductivity measurement | "Mild thermal reduction at 375 °C provides an optimal balance of surface hydrophi…" · condition_hint=reduced at 375 °C, electrode_material=graphene sponge | Modelable |
| Electrode Surface Area | 139 | m² g⁻¹ | 95% | bet analysis | "The specific surface area of the graphene sponge is found to be 139.2 m2 g−1 (Fi…" · condition_hint=reduced at 375 °C, electrode_material=graphene sponge | Excluded: no SI value |
| Tafel Slope | 80 | mV dec⁻¹ | 95% | linear sweep voltammetry | "The Tafel slope for the rGO sponge is 98 mV dec−1, which closely aligns with the…" · condition_hint=O2-saturated 0.1 M KOH electrolyte, electrode_material=Pt | Modelable |
| Open Circuit Voltage | 0.55 | V | 90% | polarization curve | "When using a mediator in MFC with graphene sponge and carbon cloth, the cell pot…" · substrate=lactate, steady_state | Modelable |
| Coulombic efficiency | 70 | % | 90% | chronoamperometry with nutrient cycling | "Furthermore, the MFC equipped with the free-standing graphene electrodes has a c…" · substrate=lactate, steady_state | Modelable |
| ORR Onset Potential (peroxide pathway, second step) | 1.2 | V vs. RHE | 90% | linear sweep voltammetry | "For the graphene sponge electrode, the characteristic two-step pathway was obser…" · condition_hint=O2-saturated 0.1 M KOH electrolyte, electrode_material=graphene sponge | Excluded: no SI value |
| Biomass Concentration | 0.06 | mg | 90% | coomassie protein reagent method | "The microorganism contents of the graphene sponge and carbon fiber are 1.12 and …" · substrate=lactate, steady_state | Excluded: no SI value |
| Current Density (Basis Unresolved) | 135 | mA m⁻² | 90% | chronoamperometry | "Markedly, the maximum current density output from the graphene sponge electrode …" · substrate=lactate, steady_state | Modelable |
| Biomass Concentration | 1.12 | mg | 90% | coomassie protein reagent method | "The microorganism contents of the graphene sponge and carbon fiber are 1.12 and …" · substrate=lactate, steady_state | Excluded: no SI value |
| Current Density (Areal) | 113Outside physical range, check source | mA cm⁻² | 90% | polarization curve | "Notably, the graphene sponge electrode shows a maximum current output of 112.7 m…" · substrate=lactate, steady_state | Excluded: outside physical bounds |
| Open Circuit Voltage | 0.3 | V | 90% | polarization curve | "For the carbon cloth-based MFC, the potential is as low as 0.3 V, which causes l…" · substrate=lactate, steady_state | Modelable |
| Open Circuit Voltage | 0.47 | V | 90% | polarization curve | "When using a mediator in MFC with graphene sponge and carbon cloth, the cell pot…" · substrate=lactate, steady_state | Modelable |
| Current Density (Areal) | 1.3 | mA cm⁻² | 90% | polarization curve | "Notably, the graphene sponge electrode shows a maximum current output of 112.7 m…" · substrate=lactate, steady_state | Modelable |
| Open Circuit Voltage | 0.6 | V | 90% | polarization curve | "The I–V curves demonstrate an identical open-circuit voltage of around 0.6 V for…" · substrate=lactate, steady_state | Modelable |
| ORR Onset Potential (peroxide pathway, first step) | 0.7 | V vs. RHE | 90% | linear sweep voltammetry | "For the graphene sponge electrode, the characteristic two-step pathway was obser…" · condition_hint=O2-saturated 0.1 M KOH electrolyte, electrode_material=graphene sponge | Excluded: no SI value |
| Power Density (Basis Unresolved) | 0.27 | mW cm⁻² | 85% | polarization curve | "The power density for the graphene sponge electrode reaches 36.2 mW cm−2, which …" · substrate=lactate, steady_state | Modelable |
| Power Density (Basis Unresolved) | 36.2Outside physical range, check source | mW cm⁻² | 85% | polarization curve | "The power density for the graphene sponge electrode reaches 36.2 mW cm−2, which …" · substrate=lactate, steady_state | Excluded: outside physical bounds |
Methodology
What was the system and how was it run
Methodology
Methodology
The study employed a single-material strategy using a graphene sponge as both the bioanode and cathode in microbial fuel cells, with Shewanella oneidensis MR-1 as the microorganism.
Electrode specifications
| Field | Value |
|---|---|
| materials | ["graphene"] |
Performance metrics
| Field | Value |
|---|---|
| citation count | 1 |
Operating conditions
4 runs extracted| Run | T°C | pHan | pHcat | Substrate | [S]mg/L | HRTh | Mode | R_extΩ | V_appV | Inoculum |
|---|---|---|---|---|---|---|---|---|---|---|
| v2-9bbd799005e9da0c | — | — | — | lactate | 20 | — | steady_state | — | — | — |
| v2-a506f7a962a34bf9 | — | — | — | lactate | 20 | — | steady_state | — | 0.2 | — |
| v2-f586e9af22985397 | — | — | — | — | — | — | — | — | — | — |
| v2-ff1fdfb467d83e25 | — | — | — | lactate | 20 | — | startup | — | — | — |
Outcomes
What was measured and what worked
Electrochemistry
4 constants| Electrode | Reaction | Parameter | Value | Unit | Conf. |
|---|---|---|---|---|---|
| anode | — | charge_transfer_resistance | 96 | ohms | 100% |
| anode | — | charge_transfer_resistance | 96 | ohms | 100% |
| cathode | — | tafel_slope | 98 | millivolts per decade | 100% |
| cathode | — | tafel_slope | 98 | millivolts per decade | 100% |
Pipeline
Raw extractions, artifacts, quality signal
Extraction quality
honesty signalCalibrate your trust in the extracted content against these signals — they're how the pipeline rated its own output for this paper.
Parameter completeness
25%
Fraction of expected parameters extracted
Data completeness
40%
Overall extraction coverage across fields
AI confidence
75%
Model self-reported confidence
Mean parameter confidence
89%
Average confidence across PaperParameter rows surfaced above
review against source PDF before citing · scores 0–1
Chart explorer
Move the inputs this paper used and see how the predicted outcome shifts.
Explore model
The reactor in 3D, with flow you can switch on and off.
AI insights
Contradictions, gaps and opportunities found by comparing this paper with the corpus.
Compare similar papers
The nearest papers by system, materials and organisms, with their outcomes side by side.
Source PDF
The paper as published.
Representative model, generic MFC
Tap to interactRepresentative model, generic MFC
Representative MFC — matched on the paper’s system type only, not its reactor or geometry.
In this record
Organisms, parameters and materials this paper reports. Each links to its page.
Organisms · 1
Keywords
- Microbial fuel cell
- Graphene
- Cathode
- Sponge
- Anode
- Faraday efficiency
Cite
Konstantin G. Nikolaev, Jiqiang Wu, Xuanye Leng et al. (2025). A single-material strategy: graphene sponge bioanode and cathode for Shewanella oneidensis MR-1 microbial fuel cells. RSC Sustainability. https://doi.org/10.1039/d5su00629e
- Journal
- RSC Sustainability
Open in lab for full controls, parameter editing, and template overlays.
Open in lab