Paper
Low electric current in a bioelectrochemical system facilitates ethanol production from CO using CO-enriched mixed culture
Summary
What the paper reports, in its own words.
Abstract
Fossil resources must be replaced by renewable resources in production systems to mitigate green-house gas emissions and combat climate change. Electro-fermentation utilizes a bioelectrochemical system (BES) to valorize industrial and municipal waste. Current electro-fermentation research is mainly focused on microbial electrosynthesis using CO 2 for producing commodity chemicals and replacing petroleum-based infrastructures. However, slow production rates and low titers of metabolites during CO 2 -based microbial electrosynthesis impede its implementation to the real application in the near future. On the other hand, CO is a highly reactive gas and an abundant feedstock discharged from fossil fuel-based industry. Here, we investigated CO and CO 2 electro-fermentation, using a CO-enriched culture. Fresh cow fecal waste was enriched under an atmosphere of 50% CO and 20% CO 2 in N 2 using serial cultivation. The CO-enriched culture was dominated by Clostridium autoethanogenum (≥89%) and showed electro-activity in a BES reactor with CO 2 sparging. When 50% CO was included in the 20% CO 2 gas with 10 mA applied current, acetate and ethanol were produced up to 12.9 ± 2.7 mM and 2.7 ± 1.1 mM, respectively. The coulombic efficiency was estimated to 148% ± 8% without an electron mediator. At 25 mA, the culture showed faster initial growth and acetate production but no ethanol production, and only at 86% ± 4% coulombic efficiency. The maximum optical density (OD) of 10 mA and 25 mA reactors were 0.29 ± 0.07 and 0.41 ± 0.03, respectively, whereas it was 0.77 ± 0.19 without electric current. These results show that CO electro-fermentation at low current can be an alternative way of valorizing industrial waste gas using a bioelectrochemical system.
AI summary
95% confidenceBES research focusing on bacteria, power, substrate. Fossil resources must be replaced by renewable resources in production systems to mitigate green-house gas emissions and combat climate change. Electro-fermentation utilizes a bioelectrochemic...
Generated by MESSAI extraction pipeline · review against source PDF
Extracted values
Every value pulled from the paper, with its source, so each number can be checked against the text.
n = 42 extracted values
Select a citation to see the quote, page and confidence behind a value.
8 of 40 extracted rows modelable
- 5 not canonicalised (no canonical slug)
- 27 no SI value
| Parameter | Value | Unit | Confidence | Source | Notes | Modelable |
|---|---|---|---|---|---|---|
| Substrate | acetate,ethanol | — | 80% | llm | ||
| Coulombic efficiency | 8 | % | 80% | llm | ||
| Product Concentration | 0.12 | g/L | 95% | hplc with refractive index detector | "Acetate and ethanol titers (g/L) Ac 0.60 ± 0.03 Eth 0.12 ± 0.05" · T=37°C, pH(an)=5, substrate=co_and_co2, steady_state | Excluded: no SI value |
| Acetic Acid Concentration | 2.7 | mM | 95% | hplc with refractive index detector | "At the end of the experiment, 12.9 ± 2.7 mM acetate and 2.7 ± 1.1 mM ethanol wer…" · T=37°C, pH(an)=5, substrate=co_and_co2, steady_state | Excluded: no SI value |
| Acetic Acid Concentration | 1.2 | mM | 95% | hplc with refractive index detector | "At the end of the experiments, concentrations of 11.3 ± 0.9 mM acetate and 1.6 ±…" · T=37°C, pH(an)=6.2, substrate=co2, steady_state | Excluded: no SI value |
| Acetic Acid Concentration | 1.6 | mM | 95% | hplc with refractive index detector | "At the end of the experiments, concentrations of 11.3 ± 0.9 mM acetate and 1.6 ±…" · T=37°C, pH(an)=5.9, substrate=co2, steady_state | Excluded: no SI value |
| Relative Abundance | 7.49 | % | 95% | 16s rrna sequencing (v1-v2 primer set) | "The second most frequent bacterial species of the enriched community was identif…" · T=37°C, pH(an)=5, substrate=co_and_co2 | Modelable |
| Relative Abundance | 4.03 | % | 95% | 16s rrna sequencing (v3-v4 primer set) | "Lacticaseobacillus chiayiensis (4% with primers V3–V4)" · T=37°C, pH(an)=5, substrate=co_and_co2 | Modelable |
| Specific Growth Rate | 0.044 | h⁻¹ | 95% | spectrophotometry at 600 nm | "The cell growth rate in the 25 mA reactor was faster (μ = 0.044 ± 0.001 h−1) tha…" · T=37°C, pH(an)=6.2, substrate=co2, startup | Modelable |
| Relative Abundance | 94.3 | % | 95% | 16s rrna sequencing (v3-v4 primer set) | "The majority of the bacterial community (≥89%) was found to consist of Clostridi…" · T=37°C, pH(an)=5, substrate=co_and_co2 | Modelable |
| Relative Abundance | 89.1 | % | 95% | 16s rrna sequencing (v1-v2 primer set) | "The majority of the bacterial community (≥89%) was found to consist of Clostridi…" · T=37°C, pH(an)=5, substrate=co_and_co2 | Modelable |
| Specific Growth Rate | 0.011 | h⁻¹ | 95% | spectrophotometry at 600 nm | "The cell growth rate in the 25 mA reactor was faster (μ = 0.044 ± 0.001 h−1) tha…" · T=37°C, pH(an)=5.9, substrate=co2, startup | Modelable |
| Acetic Acid Concentration | 12.9 | mM | 95% | hplc with refractive index detector | "At the end of the experiment, 12.9 ± 2.7 mM acetate and 2.7 ± 1.1 mM ethanol wer…" · T=37°C, pH(an)=5, substrate=co_and_co2, steady_state | Excluded: no SI value |
| Biomass Concentration | 0.3 | — | 95% | spectrophotometry at 600 nm | "When 10 mA of electric current was applied, the maximum OD was lower (0.30 ± 0.0…" · T=37°C, pH(an)=5, substrate=co_and_co2, steady_state | Excluded: no SI value |
| Acetic Acid Concentration | 16.9 | mM | 95% | hplc with refractive index detector | "When no electric current was applied, the maximum OD, 0.78 ± 0.19, was achieved …" · T=37°C, pH(an)=5, substrate=co_and_co2, steady_state | Excluded: no SI value |
| Acetic Acid Concentration | 3 | mM | 95% | hplc with refractive index detector | "While no acetate production was observed in the abiotic experiment, formate was …" · T=37°C, pH(an)=5, substrate=co_and_co2 | Excluded: no SI value |
| Acetic Acid Concentration | 6.8 | mM | 95% | hplc with refractive index detector | "At the end of the experiments, concentrations of 11.3 ± 0.9 mM acetate and 1.6 ±…" · T=37°C, pH(an)=6.2, substrate=co2, steady_state | Excluded: no SI value |
| Acetic Acid Concentration | 15.3 | mM | 95% | hplc with refractive index detector | "The maximum OD reached 0.42 ± 0.04 on day 2, and 15.3 ± 3.0 mM of acetate was de…" · T=37°C, pH(an)=5, substrate=co_and_co2, steady_state | Excluded: no SI value |
| Acetic Acid Concentration | 5.8 | mM | 95% | hplc with refractive index detector | "While no acetate production was observed in the abiotic experiment, formate was …" · T=37°C, pH(an)=5, substrate=co_and_co2 | Excluded: no SI value |
| Biomass Concentration | 0.77 | — | 95% | spectrophotometry at 600 nm | "The maximum optical density (OD) of 10 mA and 25 mA reactors were 0.29 ± 0.07 an…" · T=37°C, pH(an)=5, substrate=co_and_co2, steady_state | Excluded: no SI value |
| Acetic Acid Concentration | 11.3 | mM | 95% | hplc with refractive index detector | "At the end of the experiments, concentrations of 11.3 ± 0.9 mM acetate and 1.6 ±…" · T=37°C, pH(an)=5.9, substrate=co2, steady_state | Excluded: no SI value |
| Biomass Concentration | 0.42 | — | 95% | spectrophotometry at 600 nm | "The maximum OD reached 0.42 ± 0.04 on day 2, and 15.3 ± 3.0 mM of acetate was de…" · T=37°C, pH(an)=5, substrate=co_and_co2, startup | Excluded: no SI value |
| Acetic Acid Concentration | 0.6 | g/L | 95% | hplc with refractive index detector | "Acetate and ethanol titers (g/L) Ac 0.60 ± 0.03 Eth 0.12 ± 0.05" · T=37°C, pH(an)=5, substrate=co_and_co2, steady_state | Modelable |
| Acetic Acid Concentration | 0.72 | g/L | 95% | hplc with refractive index detector | "Acetate and ethanol titers (g/L) ... Ac 0.72 ± 0.14" · T=37°C, pH(an)=5, substrate=co_and_co2, steady_state | Modelable |
| Biomass Concentration | 0.29 | — | 95% | spectrophotometry at 600 nm | "The maximum optical density (OD) of 10 mA and 25 mA reactors were 0.29 ± 0.07 an…" · T=37°C, pH(an)=5, substrate=co_and_co2, steady_state | Excluded: no SI value |
Literature priors
Against the literature
The author’s reported value (▼) sits on top of the literature distribution from MESS-Parameters. Values outside the band are flagged as outliers.
Methodology
What was the system and how was it run
Methodology
Methodology
The authors investigated the use of a bioelectrochemical system with low electric current to facilitate ethanol production from CO using a CO-enriched mixed culture.
Biological parameters
| Field | Value |
|---|---|
| dominant species | ["Clostridium"] |
Performance metrics
| Field | Value |
|---|---|
| coulombic efficiency | 8 |
| citation count | 3 |
Operational parameters
| Field | Value |
|---|---|
| substrate | ["acetate","ethanol"] |
Operating conditions
16 runs extracted| Run | T°C | pHan | pHcat | Substrate | [S]mg/L | HRTh | Mode | R_extΩ | V_appV | Inoculum |
|---|---|---|---|---|---|---|---|---|---|---|
| v2-0fff8aa2a44bcf21 | 37 | 5 | — | co_and_co2 | — | — | steady_state | — | — | — |
| v2-379f9afb6ff07aaf | 37 | 5 | — | co_and_co2 | — | — | — | — | -0.8 | — |
| v2-3e184a9e73909e31 | 37 | 5 | — | co_and_co2 | — | — | — | — | -1 | — |
| v2-58a2540478c500d8 | 25 | — | — | — | — | — | — | — | — | — |
| v2-6f336e1a25fe9d19 | 37 | 5 | — | co_and_co2 | — | — | steady_state | — | -1 | — |
| v2-75cc08d7def72fd4 | 37 | 5 | — | CO and CO2 | — | — | batch | — | — | — |
| v2-96c77d8d0ebbb066 | — | — | — | — | — | — | startup | — | — | — |
| v2-9ac075bcf106f8c1 | 37 | 5.9 | — | co2 | — | — | steady_state | — | -0.8 | — |
| v2-ab45e64a47441279 | 37 | 5 | — | co_and_co2 | — | — | steady_state | — | -0.8 | — |
| v2-c3f11826babebaa6 | 37 | 5 | — | co_and_co2 | — | — | — | — | — | — |
| v2-c3fbc7e70c689b34 | 37 | 5 | — | co_and_co2 | — | — | startup | — | -0.8 | — |
| v2-c65079053aa9e59f | 37 | 6.2 | — | co2 | — | — | startup | — | -1 | — |
| v2-d8c3a00ee3938b79 | 37 | 6.2 | — | co2 | — | — | steady_state | — | -1 | — |
| v2-df95e568afbdce74 | 37 | 5.9 | — | co2 | — | — | startup | — | -0.8 | — |
| v2-f3c38fe8acc74b70 | 37 | 5 | — | co_and_co2 | — | — | startup | — | -1 | — |
| v2-f586e9af22985397 | — | — | — | — | — | — | — | — | — | — |
Outcomes
What was measured and what worked
Key takeaways
Coulombic efficiency
electrochemistry8percent
Pipeline
Raw extractions, artifacts, quality signal
Extraction quality
honesty signalCalibrate your trust in the extracted content against these signals — they're how the pipeline rated its own output for this paper.
Parameter completeness
63%
Fraction of expected parameters extracted
Data completeness
70%
Overall extraction coverage across fields
AI confidence
95%
Model self-reported confidence
Mean parameter confidence
91%
Average confidence across PaperParameter rows surfaced above
review against source PDF before citing · scores 0–1
Chart explorer
Move the inputs this paper used and see how the predicted outcome shifts.
Explore model
The reactor in 3D, with flow you can switch on and off.
AI insights
Contradictions, gaps and opportunities found by comparing this paper with the corpus.
Compare similar papers
The nearest papers by system, materials and organisms, with their outcomes side by side.
Source PDF
The paper as published.
No 3D model is mapped to this paper yet. The values extracted from it are listed under Extracted values.
In this record
Organisms, parameters and materials this paper reports. Each links to its page.
Organisms · 1
Parameters · 1
Keywords
- Pulp and paper industry
- Fermentation
- Microbial fuel cell
- Ethanol fuel
- Raw material
- Faraday efficiency
Cite
Chaeho Im, Minsoo Kim, Jung Rae Kim et al. (2024). Low electric current in a bioelectrochemical system facilitates ethanol production from CO using CO-enriched mixed culture. Frontiers in Microbiology. https://doi.org/10.3389/fmicb.2024.1438758
- Journal
- Frontiers in Microbiology