Paper · MFC
Air breathing cathode-microbial fuel cell with separator based on ionic liquid applied to slaughterhouse wastewater treatment and bio-energy production
Summary
What the paper reports, in its own words.
Abstract
BACKGROUND The present work explores the catalytic and electric performance of a microbial fuel cell (MFC) implemented with high chemical oxygen demand (COD) industrial wastewater from Spain. The polymer inclusion membrane based on 70% [MTOA][Cl] IL was used as separator and showed a good efficiency in power production and COD removal. RESULTS Outputs of 72% in COD conversion, 200 mV voltage and 32 mW m⁻³ power density were obtained, demonstrating that slaughterhouse wastewater is a good feedstock for the scale-up of this technology. Furthermore, the effect of the microbial fuel cell on the physical/chemical parameters of the slaughterhouse wastewater was analyzed. The concentration of nitrite, orthophosphate, sulfate and ammonium was reduced by more than half. CONCLUSIONS Air breathing cathode-microbial fuel cells based on polymer ionic liquids inclusion membranes allow the treatment of an industrial and high load slaughterhouse wastewater with good depuration and electrical performance efficiency. © 2016 Society of Chemical Industry
AI summary
95% confidenceMFC research with standard focus on standard. BACKGROUND The present work explores the catalytic and electric performance of a microbial fuel cell (MFC) implemented ...
Generated by MESSAI extraction pipeline · review against source PDF
Extracted values
Every value pulled from the paper, with its source, so each number can be checked against the text.
n = 3 extracted values
Select a citation to see the quote, page and confidence behind a value.
0 of 2 extracted rows modelable
- 2 no SI value
| Parameter | Value | Unit | Confidence | Source | Modelable |
|---|---|---|---|---|---|
| Substrate | wastewater | — | 80% | llm | |
| Cathode material | air breathing cathode | — | 50% | extracted | Excluded: no SI value |
| Membrane material | polymer inclusion membrane based on 70% [MTOA][Cl] IL | — | 50% | extracted | Excluded: no SI value |
Methodology
What was the system and how was it run
Methodology
Methodology
The study employed a microbial fuel cell (MFC) with a polymer inclusion membrane based on ionic liquid as a separator to treat slaughterhouse wastewater and generate bio-energy.
Performance metrics
| Field | Value |
|---|---|
| citation count | 24 |
Operational parameters
| Field | Value |
|---|---|
| substrate | ["wastewater"] |
Pipeline
Raw extractions, artifacts, quality signal
Extraction quality
honesty signalCalibrate your trust in the extracted content against these signals — they're how the pipeline rated its own output for this paper.
Parameter completeness
38%
Fraction of expected parameters extracted
Data completeness
60%
Overall extraction coverage across fields
AI confidence
95%
Model self-reported confidence
Mean parameter confidence
60%
Average confidence across PaperParameter rows surfaced above
review against source PDF before citing · scores 0–1
Chart explorer
Move the inputs this paper used and see how the predicted outcome shifts.
Explore model
The reactor in 3D, with flow you can switch on and off.
AI insights
Contradictions, gaps and opportunities found by comparing this paper with the corpus.
Compare similar papers
The nearest papers by system, materials and organisms, with their outcomes side by side.
Representative model, generic MFC
Tap to interactRepresentative model, generic MFC
Representative MFC — matched on the paper’s system type only, not its reactor or geometry.
Keywords
- Microbial fuel cell
- Separator (oil production)
- Chemical oxygen demand
- Wastewater
- Industrial wastewater treatment
- Pulp and paper industry
Cite
Francisco Mateo-Ramírez, H. Addi, F. J. Hernández‐Fernández et al. (2017). Air breathing cathode-microbial fuel cell with separator based on ionic liquid applied to slaughterhouse wastewater treatment and bio-energy production. Journal of Chemical Technology & Biotechnology. https://doi.org/10.1002/JCTB.5045
Open in lab for full controls, parameter editing, and template overlays.
Open in lab