Paper · MFC
Graphene-modified biochar anode on the electrical performance of MFC
Summary
What the paper reports, in its own words.
Abstract
Abstract Improving the power output and other power generation performance is the technical bottleneck restricting the industrial application of microbial fuel cell (MFC). Modification of the anode using nanomaterials can significantly increase the power output of MFC. The negatively charged characteristics of Rhodopseudomonas palustris was utilized to propose electroplating of graphene on the surface of biochar, and preparation of polyaniline (PANI) modified biochar electrode by in situ polymerization. Thus, a graphene oxide/polyaniline modified biochar (GO/PANI@Biochar) anode was prepared. Thus, compared the effects of GO/PANI@Biochar, biochar, traditional carbon cloth (CC), and graphite felt (GF) anodes on the power generation performance of MFC. The results showed that the contact angle θ of the new anode was as low as 0°. The biocompatibility is good, and a large number of electricity-producing microorganisms adhere to the surface of the anode material. The maximum power density of GO/PANI@Biochar anode MFC reached to 2025 mW/m², which was 72.12% higher than that of unmodified biochar, and it was 3.5, 4.39 times that of traditional GF and CC. The maximum output voltage was 6.12% higher than before modification, 15.56% and 23.8% higher than traditional GF and CC anodes. GO/PANI@Biochar anode utilized the advantages of GO conductivity and biochar high biocompatibility effectively. The synergism of them can significantly improve the current and power density of MFC.
AI summary
100% confidenceMFC research in electrode, membrane. Abstract Improving the power output and other power generation performance is the technical bottlene...
Generated by MESSAI extraction pipeline · review against source PDF
Extracted values
Every value pulled from the paper, with its source, so each number can be checked against the text.
n = 5 extracted values
Select a citation to see the quote, page and confidence behind a value.
0 of 5 extracted rows modelable
- 2 not canonicalised (no canonical slug)
- 3 no SI value
| Parameter | Value | Unit | Confidence | Source | Modelable |
|---|---|---|---|---|---|
| Dominant organism | Rhodopseudomonas | — | 80% | extracted | Excluded: not canonicalised (no canonical slug) |
| Maximum power density×2 | 2,030 | mW/m² | 60% | extracted | Excluded: no SI value |
| Electrode material | carbon cloth | — | 50% | extracted | Excluded: not canonicalised (no canonical slug) |
| Anode material | GO/PANI@Biochar | — | 50% | extracted | Excluded: no SI value |
Methodology
What was the system and how was it run
Methodology
Methodology
The researchers prepared a graphene oxide/polyaniline modified biochar anode through electroplating of graphene on biochar and in situ polymerization of polyaniline, and then compared its performance with traditional anodes in microbial fuel cells.
Electrode specifications
| Field | Value |
|---|---|
| materials | ["carbon cloth","graphite","graphene","biochar"] |
Biological parameters
| Field | Value |
|---|---|
| dominant species | ["Rhodopseudomonas"] |
Performance metrics
| Field | Value |
|---|---|
| max power density | 2025 |
| citation count | 17 |
Electrochemical data
| Field | Value |
|---|---|
| max power density | 2025 |
Pipeline
Raw extractions, artifacts, quality signal
Extraction quality
honesty signalCalibrate your trust in the extracted content against these signals — they're how the pipeline rated its own output for this paper.
Parameter completeness
75%
Fraction of expected parameters extracted
Reproducibility
23%
How reproducible the setup is from this paper alone
Data completeness
70%
Overall extraction coverage across fields
AI confidence
100%
Model self-reported confidence
Mean parameter confidence
58%
Average confidence across PaperParameter rows surfaced above
review against source PDF before citing · scores 0–1
Chart explorer
Move the inputs this paper used and see how the predicted outcome shifts.
Explore model
The reactor in 3D, with flow you can switch on and off.
AI insights
Contradictions, gaps and opportunities found by comparing this paper with the corpus.
Compare similar papers
The nearest papers by system, materials and organisms, with their outcomes side by side.
Representative model, generic MFC
Tap to interactRepresentative model, generic MFC
Representative MFC — matched on the paper’s system type only, not its reactor or geometry.
In this record
Organisms, parameters and materials this paper reports. Each links to its page.
Organisms · 1
Keywords
- Biochar
- Anode
- Graphene
- Polyaniline
- Chemical engineering
- Microbial fuel cell
Cite
Shaojun Zhang, W. Tong, Mingyu Wang (2021). Graphene-modified biochar anode on the electrical performance of MFC. Ferroelectrics. https://doi.org/10.1080/00150193.2021.1902759
- Journal
- Ferroelectrics
Open in lab for full controls, parameter editing, and template overlays.
Open in lab