Research

Paper

Construction of a Bioelectrochemical Dihydrogen/Formate Interconversion System and a Bio-Solar Cell

01

Summary

What the paper reports, in its own words.

AI Enhanced· 70%Power Generation

Abstract

Modern societies have energy and environmental issues such as fossil fuel depletion and excessive carbon dioxide (CO 2 ) emissions. Therefore, an effective use of renewable energy resources instead of fossil fuels is essential for the development of a sustainable energy economy. Particularly, dihydrogen (H 2 ), formic acid (HCOOH) and sunlight are expected to be new energy sources. These advantages are as follows; H 2 emits no harmful substances in use; HCOOH has a high energy density and is a liquid fuel that can be easily stored and transported; sunlight is universally available on the ground. However, the electrochemical conversion of the above energy has the following problems; a catalyst for H 2 oxidation, platinum, is expensive; byproducts such as carbon monoxide are generated in CO 2 reduction at usual electrodes; solar cell materials are sometimes expensive and environmentally harmful. In order to overcome these problems, we focused on biocatalysts, which are ecofriendly, and have high catalytic performance and selectivity under mild conditions. Furthermore, we constructed two electro-enzymatic energy conversion devices: an H 2 /HCOO - interconversion system and a bio-solar cell. In an H 2 /HCOO - interconversion system, we applied two enzymes which catalyze bidirectional redox reactions: [NiFe]-hydrogenase from Desulfovibrio vulgaris Miyazaki F (H 2 ase; EC 1.12.2.1) and tungsten-containing formate dehydrogenase from Methylobacterium extorquens AM1 (FoDH1; EC 1.2.1.2). H 2 ase and FoDH1 catalyze the H + /H 2 and CO 2 /HCOO - interconversion, respectively, and we attempted to generate HCOO - without external power supply by the coupling of two bioelectrocatalytic reactions: direct electron transfer (DET)-type H 2 oxidation catalyzed by H 2 ase and mediated electron transfer (MET)-type CO 2 reduction catalyzed by FoDH1 using benzyl viologen (BV) as a mediator (H 2 + CO 2 → HCOO - + H + ). H 2 ase was adsorbed on a bioanode functionalized with p -phenylenediamine, which leads to orientations suitable for DET-type bioelectrocatalysis of H 2 ase, while FoDH1 and BV were adsorbed on a biocathode. In addition, gas-diffusion-type electrodes were employed for high-speed supply of gaseous substrates. The two electrodes were short-circuited in a cell, and CO 2 and H 2 gasses were spontaneously supplied from the outside of the biocathode and the bioanode, respectively. The amount of formate in the electrolyte solution increased almost linearly with the reaction time. On the other hand, when the feed gasses were replaced with Ar gas to remove CO 2 and H 2 from the system, the amount of formate decreased with the time. This is due to the reversed reaction: (HCOO - + H + → H 2 + CO 2 ). These results mean that the difference in equilibrium potentials of the H + /H 2 and CO 2 /HCOO - couples determines the driving force of the reaction, which is reversed depending on conditions, and the interconversion between H 2 and HCOO - was experimentally demonstrated. A bio-solar cell is an electric energy device mimicking natural photosynthesis and extracts excited electrons outside the photosynthetic system. In this study, we constructed a bio-solar cell using the thylakoid membrane from spinach as an anodic photo-bioelectrocatalyst which oxidizes water (H 2 O) to dioxygen (O 2 ) and the recombinant bilirubin oxidase (BOD; EC 1.3.3.5) produced by expressing the gene of BOD from Myrothecium verucarria in Pichia pastoris as a cathodic bioelectrocatalyst which reduces O 2 to H 2 O. In addition, we investigated the characteristics of a thylakoid membrane-functionalized bioanode with a mediator of hexaammineruthenium(III/II) ion ([Ru(NH 3 ) 6 ] 3+/2+ ), which has the following characteristics: fast electrode kinetics, high stability and solubility, and somewhat low redox potential. The photo-driven bioanode prepared by applying the mixture of thylakoid membranes and water-dispersed multi-walled carbon nanotubes on a gold-spattered indium tin oxide (ITO) electrode showed the photocurrent caused by MET-type photo-bioelectrocatalytic H 2 O oxidation in a buffer (pH 7.0) containing 5 mM Ru(NH 3 ) 6 Cl 3 under the light condition. The performance of the bioanode (0.2 mA cm - 2 at 0 V vs. Ag|AgCl|sat. KCl) is better than that in the previous report using 1,2-naphthoquinone as a mediator. Then, a bio-solar cell was constructed by combining the bioanode with the BOD-modified gas-diffusion-type biocathode, and O 2 was spontaneously supplied from the outside of the biocathode. The cell exhibited an open-circuit voltage of 0.61 V and a maximum power density of 50 μW cm - 2 at a cell voltage of 0.42 V under quiescent conditions. To the best of our knowledge, the power density of our cell unit is the highest among those reported for the bio-solar cells to date. These works lead to the artificial photosynthetic system, which generates H 2 or HCOO - from sunlight and H 2 O (and CO 2 ), and they might be a breakthrough for the sustainable energy economy.

AI summary

70% confidence

BES research paper focusing on carbon nanotube, power density, anode

Generated by MESSAI extraction pipeline · review against source PDF

02

Extracted values

Every value pulled from the paper, with its source, so each number can be checked against the text.

n = 8 extracted values

Select a citation to see the quote, page and confidence behind a value.

0 of 7 extracted rows modelable

  • 3 not canonicalised (no canonical slug)
  • 4 no SI value
ParameterValueUnitConfidenceSourceModelable
pH[object Object]—80%
llm
Dominant organismDesulfovibrio—80%
extracted
Excluded: not canonicalised (no canonical slug)
Cathode materialbiocathode—60%
extracted
Excluded: no SI value
Open circuit voltage0.61V60%
extracted
Excluded: not canonicalised (no canonical slug)
Electrode materialcarbon nanotube—50%
extracted
Excluded: not canonicalised (no canonical slug)
Maximum power density0.05mW/m²50%
extracted
Excluded: no SI value
Anode materialthylakoid membrane from spinach + multi-walled carbon nanotubes on gold-spattered ITO—50%
extracted
Excluded: no SI value
Cathode materialrecombinant bilirubin oxidase (BOD) from Myrothecium verucarria expressed in Pichia pastoris—50%
extracted
Excluded: no SI value

Methodology

What was the system and how was it run

Methodology

Methodology

The authors constructed a bioelectrochemical dihydrogen/formate interconversion system and a bio-solar cell using microorganisms and electrochemical cells.

Electrode specifications

FieldValue
materials["carbon nanotube","platinum","gold"]

Biological parameters

FieldValue
dominant species["Desulfovibrio"]

Operational parameters

FieldValue
p h{"min":7,"max":7,"optimal":7}

Electrochemical data

FieldValue
open circuit voltage0.61

Pipeline

Raw extractions, artifacts, quality signal

Extraction quality

honesty signal

Calibrate your trust in the extracted content against these signals — they're how the pipeline rated its own output for this paper.

Parameter completeness

63%

Fraction of expected parameters extracted

Data completeness

60%

Overall extraction coverage across fields

AI confidence

70%

Model self-reported confidence

Mean parameter confidence

60%

Average confidence across PaperParameter rows surfaced above

review against source PDF before citing · scores 0–1

03

Chart explorer

Move the inputs this paper used and see how the predicted outcome shifts.

04

Explore model

The reactor in 3D, with flow you can switch on and off.

05

AI insights

Contradictions, gaps and opportunities found by comparing this paper with the corpus.

06

Compare similar papers

The nearest papers by system, materials and organisms, with their outcomes side by side.

No 3D model is mapped to this paper yet. The values extracted from it are listed under Extracted values.

0.05milliwatts per square metre
Best result · Power density
8
Extracted values
2020
Year

In this record

Organisms, parameters and materials this paper reports. Each links to its page.

Keywords

  • Formate
  • Hydrogenase
  • Catalysis
  • Formate dehydrogenase
  • Fossil fuel
  • Renewable energy

Cite

Taiki Adachi, Yuki Kitazumi, Osamu Shirai et al. (2020). Construction of a Bioelectrochemical Dihydrogen/Formate Interconversion System and a Bio-Solar Cell. ECS Meeting Abstracts. https://doi.org/10.1149/ma2020-02683640mtgabs