Research

Paper · MFC

An IoT-Enabled Microbial Fuel Cell for Wastewater Treatment and Enhancing Hydroponic Systems: An Eco-Friendly Renewable Energy Development

01

Summary

What the paper reports, in its own words.

3D Interactive ModelAI Enhanced· 100%Wastewater TreatmentBioremediation

Abstract

Chemical manufacturing, textile processing, and other industrial activities have increased the importance of effective wastewater treatment. This study gives a systematic look at how well an artificially ventilated tidal flow Microbial Fuel Cell (MFC) wetland system cleans the water. The system uses IoT monitoring to continuously collect data on the MFC's performance, which can be used to optimize the system for wastewater treatment and energy generation. Integrating IoT monitoring with the ESP8266-12 and ADS1115 improves real-time evaluation and makes it possible to keep improving the performance of MFCs for efficient treatment of wastewater and production of energy. The main feature of this system is that - (i) it can generate electricity. Secondly, (ii) it has waste disposal facilities, and (iii) the chemical elements of wastewater can produce hydroponic plants. The study used three materials: Jhama brick, brick surkhi, and rubber tire fragments. By testing NH4_N, N02_N, N03_N, TN, TSS, TKN, BOD, and COD. The experiment results show that TKN (65.8%) and TN (76.9%) removed the most nitrogen due to better nitrification-denitrification and media-oriented chemical adsorption. The highest pollutant and coliform removed were found at around 87.5% and 95.09% of COD, respectively. The proposed system can produce bioenergy with a maximum voltage of 142 mV, a maximum current density of 27.85 mA/m³, and a maximum power density of 3954.03 mW/m³. Pollutant removal was highest when jhama brick was used as a medium in MFC and lowest when rubber tire fragments were used.

AI summary

100% confidence

International MFC research in renewable-energy with focus on renewable-integration, iot-smart-systems, performance. Chemical manufacturing, textile processing, and other industrial activities have increased the importance of effective w...

Generated by MESSAI extraction pipeline · review against source PDF

02

Extracted values

Every value pulled from the paper, with its source, so each number can be checked against the text.

n = 3 extracted values

Select a citation to see the quote, page and confidence behind a value.

0 of 3 extracted rows modelable

  • 3 no SI value
ParameterValueUnitConfidenceSourceModelable
Substratewastewater—70%
extracted
Excluded: no SI value
Maximum power density3.95mW/m²50%
extracted
Excluded: no SI value
Maximum Current Density27.9mA/m²50%
extracted
Excluded: no SI value

Methodology

What was the system and how was it run

Methodology

Methodology

The study employed an artificially ventilated tidal flow Microbial Fuel Cell (MFC) wetland system with IoT monitoring using ESP8266-12 and ADS1115 for real-time data collection and optimization.

Operational parameters

FieldValue
substrate["wastewater"]

Pipeline

Raw extractions, artifacts, quality signal

Extraction quality

honesty signal

Calibrate your trust in the extracted content against these signals — they're how the pipeline rated its own output for this paper.

Parameter completeness

25%

Fraction of expected parameters extracted

Data completeness

50%

Overall extraction coverage across fields

AI confidence

100%

Model self-reported confidence

Mean parameter confidence

57%

Average confidence across PaperParameter rows surfaced above

review against source PDF before citing · scores 0–1

03

Chart explorer

Move the inputs this paper used and see how the predicted outcome shifts.

04

Explore model

The reactor in 3D, with flow you can switch on and off.

05

AI insights

Contradictions, gaps and opportunities found by comparing this paper with the corpus.

06

Compare similar papers

The nearest papers by system, materials and organisms, with their outcomes side by side.

loading 3D model…

Representative model, generic MFC

Representative MFC — matched on the paper’s system type only, not its reactor or geometry.

MFC
System
3.95milliwatts per square metre
Best result · Power density
3
Extracted values
2023
Year

Keywords

  • Environmentally friendly
  • Renewable energy
  • Microbial fuel cell
  • Fuel cells
  • Waste management
  • Internet of Things

Cite

Sanowar Hossain, Md Asif Adnan, Abu Shufian et al. (2023). An IoT-Enabled Microbial Fuel Cell for Wastewater Treatment and Enhancing Hydroponic Systems: An Eco-Friendly Renewable Energy Development. 2023 IEEE 11th Region 10 Humanitarian Technology Conference (R10-HTC). https://doi.org/10.1109/R10-HTC57504.2023.10461773

Open in lab for full controls, parameter editing, and template overlays.

Open in lab