Research

Paper · MES

Microbial Electrosynthesis Using 3D Bioprinting of Sporomusa ovata on Copper, Stainless-Steel, and Titanium Cathodes for CO2 Reduction

01

Summary

What the paper reports, in its own words.

3D Interactive ModelAI Enhanced· 100%Substrate ·complex mediaElectrosynthesis

Abstract

Acetate can be produced from carbon dioxide (CO2) and electricity using bacteria at the cathode of microbial electrosynthesis (MES). This process relies on electrolytically-produced hydrogen (H2). However, the low solubility of H2 can limit the process. Using metal cathodes to generate H2 at a high rate can improve MES. Immobilizing bacteria on the metal cathode can further proliferate the H2 availability to the bacteria. In this study, we investigated the performances of 3D bioprinting of Sporomusa ovata on three metal meshes—copper (Cu), stainless steel (SS), and titanium (Ti), when used individually as a cathode in MES. Bacterial cells were immobilized on the metal using a 3D bioprinter with alginate hydrogel ink. The bioprinted Ti mesh exhibited higher acetate production (53 ± 19 g/m²/d) at −0.8 V vs. Ag/AgCl as compared to other metal cathodes. More than 9 g/L of acetate was achieved with bioprinted Ti, and the least amount was obtained with bioprinted Cu. Although all three metals are known for catalyzing H2 evolution, the lower biocompatibility and chemical stability of Cu hampered its performance. Stable and biocompatible Ti supported the bioprinted S. ovata effectively. Bioprinting of synthetic biofilm on H2-evolving metal cathodes can provide high-performing and robust biocathodes for further application of MES.

AI summary

100% confidence

Specialized MES research in materials-science focusing on novel-materials, substrates. Acetate can be produced from carbon dioxide (CO2) and electricity using bacteria at the cathode of microbial electrosynthe...

Generated by MESSAI extraction pipeline · review against source PDF

02

Extracted values

Every value pulled from the paper, with its source, so each number can be checked against the text.

n = 57 extracted values

Select a citation to see the quote, page and confidence behind a value.

21 of 56 extracted rows modelable

  • 13 not canonicalised (no canonical slug)
  • 21 no SI value
  • 1 not marked applicable to modeling
ParameterValueUnitConfidenceSourceNotesModelable
Substrateacetate—80%
llm
Acetate Production Rate0.84g/L/d95%
batch mes operation with hplc sampling
"reaching the highest instantaneous production rate of 0.84 g/L/d (130.5 g/m2/d)" · T=35°C, substrate=co2Modelable
Copper annealing temperature300°C95%
thermal annealing
"The copper electrode was first annealed at 300 ◦C for 8 h to form a CuOx layer" · condition_hint=electrode pretreatment, electrode_material=copperExcluded: not canonicalised (no canonical slug)
Bioprint layer thickness0.5mm95%
3d bioprinting specification
"a single layer of hydrogel (15 mm × 15 mm, ~0.5 mm thick) was printed onto the c…" · T=35°CExcluded: not canonicalised (no canonical slug)
Cu cathode size25mm95%
electrode specification
"The cathodes consisted of 25 mm × 25 mm sized square-shaped metal meshes of copp…" · T=35°CExcluded: not canonicalised (no canonical slug)
Bioprint layer area15mm95%
3d bioprinting specification
"a single layer of hydrogel (15 mm × 15 mm, ~0.5 mm thick) was printed onto the c…" · T=35°CExcluded: not canonicalised (no canonical slug)
Ti cathode size28mm95%
electrode specification
"The titanium mesh was of size 28 mm × 70 mm" · T=35°CExcluded: not canonicalised (no canonical slug)
Acetic Acid Concentration29.5mM95%
hplc analysis
"This study Synthetic biofilm on Cu −0.8 to −0.9 0.05 ± 0.01 23.05 ± 7.1 26 29.5" · T=35°C, substrate=co2Excluded: no SI value
Reactor Volume270mL95%
reactor specification
"All experiments were carried out in standard H-type, dual-chambered glass reacto…" · T=35°C, substrate=co2Modelable
Cathode Potential-0.8V vs. Ag/AgCl95%
potentiostat control
"The metal cathodes with 3D-bioprinted S. ovata were used as working electrodes w…" · T=35°C, substrate=co2Excluded: not marked applicable to modeling
Acetic Acid Concentration43mM95%
hplc analysis
"This study Synthetic biofilm on SS −0.8 to −1 0.1 ± 0.01 24.6 ± 8.8 51 43" · T=35°C, substrate=co2Excluded: no SI value
Gas bag volume3L95%
reactor specification
"A gas bag (~3L volume) filled with 100% CO2 was added to the cathode chamber" · T=35°C, substrate=co2Excluded: not canonicalised (no canonical slug)
Cathode Area Cell70mm95%
electrode specification
"The titanium mesh was of size 28 mm × 70 mm" · T=35°CExcluded: no SI value
Acetate Production Rate9.4g/L95%
hplc analysis
"reaching 9.4 g/L at the end of the run" · T=35°C, substrate=co2Excluded: no SI value
Acetate Production Rate53g/m²/d95%
batch mes operation
"The bioprinted Ti mesh exhibited higher acetate production (53 ± 19 g/m2/d) at −…" · T=35°C, substrate=co2Excluded: no SI value
Substrate Concentration0.5g/L95%
media preparation
"A small amount of yeast extract (0.5 g/L) was added to the media to help with in…" · T=35°C, substrate=yeast_extractModelable
Acetic Acid Concentration4g/L95%
hplc analysis
"reaching a concentration of 4 g/L acetate. After day 18, the acetate production …" · T=35°C, substrate=co2Modelable
Acetic Acid Concentration9g/L95%
hplc analysis
"More than 9 g/L of acetate was achieved with bioprinted Ti" · T=35°C, substrate=co2Modelable
Acetate Production Rate0.1g/L/d95%
batch mes operation with hplc sampling
"After day 18, the acetate production continued steadily at an average rate of 0.…" · T=35°C, substrate=co2Modelable
Acetate Production Rate30.2g/m²/d95%
batch mes operation
"The highest acetate production rate at this initial period of operation in CuBP1…" · T=35°C, substrate=co2Excluded: no SI value
Acetic Acid Concentration0.74g/L95%
hplc analysis
"The production continued steadily and reached 0.74 g/L of acetate in 8 days" · T=35°C, substrate=co2Modelable
Graphite anode diameter20mm95%
electrode specification
"Graphite rods (Schunk Carbon Technology AB, Lenhovda, Sweden; diameter: 20 mm, h…" · T=35°CExcluded: not canonicalised (no canonical slug)
Copper annealing time8h95%
thermal annealing
"The copper electrode was first annealed at 300 ◦C for 8 h to form a CuOx layer" · T=35°CExcluded: not canonicalised (no canonical slug)
Acetic Acid Concentration157mM95%
hplc analysis
"This study Synthetic biofilm on Ti −0.8 0.34 ± 0.12 53 ± 19 55 ± 20.1 157" · T=35°C, substrate=co2Excluded: no SI value
SS cathode size25mm95%
electrode specification
"The cathodes consisted of 25 mm × 25 mm sized square-shaped metal meshes of copp…" · T=35°CExcluded: not canonicalised (no canonical slug)
Showing 25 of 57

Methodology

What was the system and how was it run

Methodology

Methodology

The study used 3D bioprinting to immobilize Sporomusa ovata bacteria on copper, stainless-steel, and titanium cathodes for microbial electrosynthesis (MES) to improve CO2 reduction.

Electrode specifications

FieldValue
materials["stainless steel","titanium","copper"]

Performance metrics

FieldValue
citation count11

Operational parameters

FieldValue
substrate["acetate"]

Operating conditions

10 runs extracted
RunT°CpHanpHcatSubstrate[S]mg/LHRThModeR_extΩV_appVInoculum
v2-03a28a7fe995479435——co2————-0.8—
v2-1cb8de6a8a4768a635—————————
v2-200f0d01292be90435——co2————-0.9—
v2-2920f5c12bb784a035——co2——————
v2-3e4a9787aa04850435———500—————
v2-6cda6021ca447710———co2————-0.93—
v2-8cccd5e802ce6d3735——yeast_extract500—————
v2-9a9be007ed73e554———co2————-1.4—
v2-d41d8cd98f00b204——————————
v2-fce707ed4f4c685b———co2————-0.6—

Pipeline

Raw extractions, artifacts, quality signal

Extraction quality

honesty signal

Calibrate your trust in the extracted content against these signals — they're how the pipeline rated its own output for this paper.

Parameter completeness

50%

Fraction of expected parameters extracted

Data completeness

60%

Overall extraction coverage across fields

AI confidence

100%

Model self-reported confidence

Mean parameter confidence

89%

Average confidence across PaperParameter rows surfaced above

review against source PDF before citing · scores 0–1

03

Chart explorer

Move the inputs this paper used and see how the predicted outcome shifts.

04

Explore model

The reactor in 3D, with flow you can switch on and off.

05

AI insights

Contradictions, gaps and opportunities found by comparing this paper with the corpus.

06

Compare similar papers

The nearest papers by system, materials and organisms, with their outcomes side by side.

07

Source PDF

The paper as published.

loading 3D model…

Representative model, generic microbial electrochemical system

Representative microbial electrochemical system — matched on the paper’s system type only, not its reactor or geometry.

MES
System
57
Extracted values
2023
Year

In this record

Organisms, parameters and materials this paper reports. Each links to its page.

Organisms · 1

Keywords

  • Cathode
  • Titanium
  • Chemical engineering
  • Copper
  • Titanium dioxide
  • Biofilm

Cite

Suman Bajracharya, Adolf Krige, Leonidas Matsakas et al. (2023). Microbial Electrosynthesis Using 3D Bioprinting of Sporomusa ovata on Copper, Stainless-Steel, and Titanium Cathodes for CO2 Reduction. Fermentation. https://doi.org/10.3390/fermentation10010034

Open in lab for full controls, parameter editing, and template overlays.

Open in lab