Paper
Anion intercalation enables efficient and stable carboxylate upgrading via aqueous non-Kolbe electrolysis
Summary
What the paper reports, in its own words.
Abstract
Next-generation techniques for sustainable carboxylate production generate carboxylate salts as the primary outcome. To circumvent the costly conversion of carboxylate salts to acids, we demonstrate the aqueous (non-)Kolbe electrolysis process as an alternative strategy to generate downstream value-added chemicals. Upon revealing the irreversible oxidation-induced charge transfer inhibition on the graphite anode, we propose an anion intercalation strategy to mitigate the stability problem induced by the ever-increasing overpotential. In acetate decarboxylation, we observe a high Faradaic efficiency of ~95% for non-Kolbe products (methanol and methyl acetate) at wide current densities ranging from 0.05 to 1 A cm⁻² and long-term stability at current densities of 0.15 and 0.6 A cm⁻² for 130 and 35 h, respectively. We also extended this strategy for the upgrading of long-chain carboxylates such as propionate, butyrate, and succinate. Our work provides valuable guidance for carboxylate upgrading and extendable strategy for overcoming passivation challenges in catalysis. Here, the authors propose an anion intercalation strategy to mitigate the stability problem of aqueous non-Kolbe electrolysis, which enables the efficient upgrading of carboxylate salts to value-added chemicals.
Extracted values
Every value pulled from the paper, with its source, so each number can be checked against the text.
n = 63 extracted values
Select a citation to see the quote, page and confidence behind a value.
0 of 63 extracted rows modelable
- 63 not canonicalised (no canonical slug)
| Parameter | Value | Unit | Confidence | Source | Notes | Modelable |
|---|---|---|---|---|---|---|
| Electrode area | 0.75 | cm² | 95% | extracted | "The electrode area is 0.75 cm2." · electrode=graphite | Excluded: not canonicalised (no canonical slug) |
| Volume of the anodic and cathodic chambers | 5 | mL | 95% | extracted | "The volume of the anodic and cathodic chambers is 5 mL." · cell=customized flow reactor | Excluded: not canonicalised (no canonical slug) |
| Anolyte (carboxylate solution) flow rate | 2 | mL min⁻¹ | 95% | extracted | "A carboxylate solution of 2 mL min-1 was pumped into the anode side, and a 1 M H…" · cell=flow cell, Nafion 115 membrane, electrode=graphite | Excluded: not canonicalised (no canonical slug) |
| Catholyte (H2SO4) flow rate | 2 | mL min⁻¹ | 95% | extracted | "A carboxylate solution of 2 mL min-1 was pumped into the anode side, and a 1 M H…" · cell=flow cell, Nafion 115 membrane, electrolyte=1 M H2SO4 (catholyte) | Excluded: not canonicalised (no canonical slug) |
| Catholyte H2SO4 concentration | 1 | M | 95% | extracted | "A carboxylate solution of 2 mL min-1 was pumped into the anode side, and a 1 M H…" · cell=flow cell, Nafion 115 membrane, electrolyte=H2SO4 (catholyte) | Excluded: not canonicalised (no canonical slug) |
| Current density of the levulinate stability test (Fig. 4f) | 0.1 | A cm⁻² | 95% | extracted | "1 M levulinic acid (HLA) and 1 M sodium levulinate (NaLA) (pH= 4.65 ± 0.13) with…" · ph=4.65 ± 0.13, acids=["levulinate"], electrode=graphite, electrolyte=1 M HLA + 1 M NaLA | Excluded: not canonicalised (no canonical slug) |
| Current density of the 2 M NaAc stability test (Fig. 4a) | 0.3 | A cm⁻² | 95% | extracted | "an electrolyte containing 2 M NaAc (pH= 8.50 ± 0.25) with or without the additio…" · ph=8.50 ± 0.25, acids=["acetate"], electrode=graphite, electrolyte=2 M NaAc | Excluded: not canonicalised (no canonical slug) |
| Current density of the alkaline 2 M NaAc stability test (Fig. 4b) | 0.5 | A cm⁻² | 95% | extracted | "2 M NaAc and 0.1 M NaOH (pH= 12.9 ± 0.20) with or without the addition of NaClO4…" · ph=12.9 ± 0.20, acids=["acetate"], electrode=graphite, electrolyte=2 M NaAc + 0.1 M NaOH | Excluded: not canonicalised (no canonical slug) |
| Propionic acid and sodium propionate concentration (Fig. 4c) | 1 | M | 95% | extracted | "1 M propionic acid (HPr) and 1 M sodium propionate (NaPr) (pH= 4.88 ± 0.10) with…" · acids=["propionate"], electrode=graphite, electrolyte=1 M HPr + 1 M NaPr, current_density=0.3 A cm−2 | Excluded: not canonicalised (no canonical slug) |
| Current density of the propionate stability test (Fig. 4c) | 0.3 | A cm⁻² | 95% | extracted | "1 M propionic acid (HPr) and 1 M sodium propionate (NaPr) (pH= 4.88 ± 0.10) with…" · ph=4.88 ± 0.10, acids=["propionate"], electrode=graphite, electrolyte=1 M HPr + 1 M NaPr | Excluded: not canonicalised (no canonical slug) |
| Butyric acid and sodium butyrate concentration (Fig. 4d) | 1 | M | 95% | extracted | "1 M butyric acid (HBu) and 1 M sodium butyrate (NaBu) (pH= 4.82 ± 0.25) with or …" · acids=["butyrate"], electrode=graphite, electrolyte=1 M HBu + 1 M NaBu, current_density=0.2 A cm−2 | Excluded: not canonicalised (no canonical slug) |
| Current density of the butyrate stability test (Fig. 4d) | 0.2 | A cm⁻² | 95% | extracted | "1 M butyric acid (HBu) and 1 M sodium butyrate (NaBu) (pH= 4.82 ± 0.25) with or …" · ph=4.82 ± 0.25, acids=["butyrate"], electrode=graphite, electrolyte=1 M HBu + 1 M NaBu | Excluded: not canonicalised (no canonical slug) |
| Monosodium succinate (NaSA) concentration (Fig. 4e) | 0.5 | M | 95% | extracted | "0.5 M monosodium succinate (NaSA) (pH= 6.50 ± 0.33) with or without the addition…" · acids=["succinate"], electrode=graphite, electrolyte=0.5 M NaSA, current_density=0.1 A cm−2 | Excluded: not canonicalised (no canonical slug) |
| Current density of the succinate stability test (Fig. 4e) | 0.1 | A cm⁻² | 95% | extracted | "0.5 M monosodium succinate (NaSA) (pH= 6.50 ± 0.33) with or without the addition…" · ph=6.50 ± 0.33, acids=["succinate"], electrode=graphite, electrolyte=0.5 M NaSA | Excluded: not canonicalised (no canonical slug) |
| Levulinic acid and sodium levulinate concentration (Fig. 4f) | 1 | M | 95% | extracted | "1 M levulinic acid (HLA) and 1 M sodium levulinate (NaLA) (pH= 4.65 ± 0.13) with…" · acids=["levulinate"], electrode=graphite, electrolyte=1 M HLA + 1 M NaLA, current_density=0.1 A cm−2 | Excluded: not canonicalised (no canonical slug) |
| pH of 1 M HLA + 1 M NaLA electrolyte (Fig. 4f) | 4.65 ± 0.13 | — | 95% | extracted | "1 M levulinic acid (HLA) and 1 M sodium levulinate (NaLA) (pH= 4.65 ± 0.13) with…" · acids=["levulinate"], electrode=graphite, electrolyte=1 M HLA + 1 M NaLA, current_density=0.1 A cm−2 | Excluded: not canonicalised (no canonical slug) |
| pH of 1 M HBu + 1 M NaBu electrolyte (Fig. 4d) | 4.82 ± 0.25 | — | 95% | extracted | "1 M butyric acid (HBu) and 1 M sodium butyrate (NaBu) (pH= 4.82 ± 0.25) with or …" · acids=["butyrate"], electrode=graphite, electrolyte=1 M HBu + 1 M NaBu, current_density=0.2 A cm−2 | Excluded: not canonicalised (no canonical slug) |
| pH of 1 M HPr + 1 M NaPr electrolyte (Fig. 4c) | 4.88 ± 0.10 | — | 95% | extracted | "1 M propionic acid (HPr) and 1 M sodium propionate (NaPr) (pH= 4.88 ± 0.10) with…" · acids=["propionate"], electrode=graphite, electrolyte=1 M HPr + 1 M NaPr, current_density=0.3 A cm−2 | Excluded: not canonicalised (no canonical slug) |
| Stability duration at 0.6 A cm-2 without significant degradation (NaClO4 system) | 35 | h | 95% | extracted | "the stability of the NaClO4 system at a higher current density of 0.6 A cm-2 sho…" · acids=["acetate"], electrode=graphite, electrolyte=2 M NaAc + 2 M HAc + 0.1 M NaClO4, current_density=0.6 A cm−2 | Excluded: not canonicalised (no canonical slug) |
| pH of 2 M NaAc + 0.1 M NaOH electrolyte (Fig. 4b) | 12.9 ± 0.20 | — | 95% | extracted | "2 M NaAc and 0.1 M NaOH (pH= 12.9 ± 0.20) with or without the addition of NaClO4…" · acids=["acetate"], electrode=graphite, electrolyte=2 M NaAc + 0.1 M NaOH, current_density=0.5 A cm−2 | Excluded: not canonicalised (no canonical slug) |
| Sodium acetate concentration (Fig. 4a, no acetic acid) | 2 | M | 95% | extracted | "an electrolyte containing 2 M NaAc (pH= 8.50 ± 0.25) with or without the additio…" · acids=["acetate"], electrode=graphite, electrolyte=2 M NaAc, current_density=0.3 A cm−2 | Excluded: not canonicalised (no canonical slug) |
| Steady current density of the deactivation test | 0.15 | A cm⁻² | 95% | extracted | "buffered solution containing 2 M acetate sodium (NaAc) and 2 M acetic acid (HAc)…" · acids=["acetate"], electrode=graphite, electrolyte=2 M NaAc + 2 M HAc | Excluded: not canonicalised (no canonical slug) |
| Current density range of the pre-/post-deactivation comparison | 0.05 | A cm⁻² | 95% | extracted | "wide range of current densities from 0.05 to 0.3 A cm-2" · acids=["acetate"], electrode=graphite, electrolyte=2 M NaAc + 2 M HAc | Excluded: not canonicalised (no canonical slug) |
| Total FE for non-Kolbe products maintained over the 130 h stability test | 95 | % | 95% | extracted | "A stability test conducted at a constant current density of 0.15 A cm-2 with the…" · time=130 h, acids=["acetate"], electrode=graphite, electrolyte=2 M NaAc + 2 M HAc + 0.1 M NaClO4 | Excluded: not canonicalised (no canonical slug) |
| NaClO4 concentration added to the electrolyte | 0.1 | M | 95% | extracted | "with the addition of 0.1 M NaClO4, we observed rapid recovery of the anode poten…" · electrode=graphite, electrolyte=2 M NaAc + 2 M HAc + 0.1 M NaClO4, current_density=0.3 A cm−2 | Excluded: not canonicalised (no canonical slug) |
Pipeline
Raw extractions, artifacts, quality signal
Extraction quality
honesty signalCalibrate your trust in the extracted content against these signals — they're how the pipeline rated its own output for this paper.
Mean parameter confidence
91%
Average confidence across PaperParameter rows surfaced above
review against source PDF before citing · scores 0–1
Chart explorer
Move the inputs this paper used and see how the predicted outcome shifts.
Explore model
The reactor in 3D, with flow you can switch on and off.
AI insights
Contradictions, gaps and opportunities found by comparing this paper with the corpus.
Compare similar papers
The nearest papers by system, materials and organisms, with their outcomes side by side.
Source PDF
The paper as published.
No 3D model is mapped to this paper yet. The values extracted from it are listed under Extracted values.
Keywords
- succinic acid
- butyrate
- anion intercalation
- Faradaic efficiency
- methyl acetate
- propionate
- methanol synthesis
Cite
Xinyan Zhang, Laihao Luo, Chunxiao Liu et al. (2025). Anion intercalation enables efficient and stable carboxylate upgrading via aqueous non-Kolbe electrolysis. Nature Communications. https://doi.org/10.1038/s41467-025-58924-x
- Journal
- Nature Communications