Research

Paper

On‐line Electrode Dissolution Monitoring during Organic Electrosynthesis: Direct Evidence of Electrode Dissolution during Kolbe Electrolysis

01

Summary

What the paper reports, in its own words.

ElectrosynthesisBiomass Valorization

Abstract

Electrode dissolution was monitored in real‐time during Kolbe electrolysis along with the characteristic products. The fast determination of appropriate reaction conditions in electro‐organic chemistry enables the minimization of electrode degradation while keeping an eye on the optimal formation rate and distribution of products. Herein, essential parameters influencing the dissolution of the electrode material platinum in a Kolbe electrolysis were pinpointed. The formation of reaction products and soluble platinum species were monitored during potentiodynamic and potentiostatic experiments using an electroanalytical flow cell coupled to two different mass spectrometers. The approach opens new vistas in the field of electro‐organic chemistry because it enables precise and quick quantification of dissolved metals during electrosynthesis, also involving electrode materials other than platinum. Furthermore, it draws attention to the vital topic of electrode stability in electro‐organic synthesis, which becomes increasingly important for the implementation of green chemical processes utilizing renewable energy.

02

Extracted values

Every value pulled from the paper, with its source, so each number can be checked against the text.

n = 32 extracted values

Select a citation to see the quote, page and confidence behind a value.

0 of 32 extracted rows modelable

  • 32 not canonicalised (no canonical slug)
ParameterValueUnitConfidenceSourceNotesModelable
Electrolyte flow rate through electroanalytical flow cell150μL min⁻¹100%
extracted
"The electrolyte was pumped through the EFC with a flow rate of 150 μL min-1 usin…" · cell=electroanalytical flow cell (EFC), acids=["acetic acid"], solvent=methanol, electrode=polycrystalline PtExcluded: not canonicalised (no canonical slug)
Current density in galvanostatic measurements5mA cm⁻²100%
extracted
"The method was also applied during galvanostatic measurements at 5, 10, 15, and …" · acids=["acetic acid"], solvent=methanol, electrode=polycrystalline Pt, electrolyte=1 mol L−1 acetic acid, 0.1 mol L−1 LiOH in methanolExcluded: not canonicalised (no canonical slug)
Scan rate of cyclic voltammetry10mV s⁻¹100%
extracted
"The potential was cycled between -0.5 and 3 V with a scan rate of 10 mV s-1." · acids=["acetic acid"], solvent=methanol, electrode=polycrystalline Pt, electrolyte=LiOH, NEt3 and NEt3+H2O electrolytesExcluded: not canonicalised (no canonical slug)
Fraction of internal resistance compensated (iR compensation)85%100%
extracted
"85 % of the determined internal resistance was compensated for during the measur…" · cell=electroanalytical flow cell (EFC), acids=["acetic acid"], solvent=methanol, electrode=polycrystalline PtExcluded: not canonicalised (no canonical slug)
Added H₂O concentration in NEt3 electrolyte0.1mol L⁻¹100%
extracted
"Hence, an additional electrolyte system with 1 mol L-1 acetic acid, 0.1 mol L-1 …" · acids=["acetic acid"], solvent=methanol, electrode=polycrystalline Pt, electrolyte=1 mol L−1 acetic acid, 0.1 mol L−1 NEt3, 0.1 mol L−1 H2O in methanolExcluded: not canonicalised (no canonical slug)
Water content of electrolyte with LiOH2,280ppm100%
karl fischer coulometry (917 coulometer)
"Determined water contents of electrolytes: methanol containing 1 mol L-1 acetic …" · acids=["acetic acid"], solvent=methanol, electrode=polycrystalline Pt, electrolyte=1 mol L−1 acetic acid, 0.1 mol L−1 LiOH in methanolExcluded: not canonicalised (no canonical slug)
Water content of electrolyte with NEt365ppm100%
karl fischer coulometry (917 coulometer)
"Determined water contents of electrolytes: methanol containing 1 mol L-1 acetic …" · acids=["acetic acid"], solvent=methanol, electrode=polycrystalline Pt, electrolyte=1 mol L−1 acetic acid, 0.1 mol L−1 NEt3 in methanolExcluded: not canonicalised (no canonical slug)
Water content of electrolyte with NEt3 and 0.1 mol L−1 H₂O2,310ppm100%
karl fischer coulometry (917 coulometer)
"Determined water contents of electrolytes: methanol containing 1 mol L-1 acetic …" · acids=["acetic acid"], solvent=methanol, electrode=polycrystalline Pt, electrolyte=1 mol L−1 acetic acid, 0.1 mol L−1 NEt3, 0.1 mol L−1 H2O in methanolExcluded: not canonicalised (no canonical slug)
Anodic potential step (Figure 1 experiment)3V vs. Fc/Fc+100%
extracted
"(a) Kolbe electrolysis in the course of a chronoamperometric measurement at 3 V …" · acids=["acetic acid"], solvent=methanol, electrode=polycrystalline Pt, electrolyte=LiOH, NEt3 and NEt3+0.1 mol L−1 H2O electrolytesExcluded: not canonicalised (no canonical slug)
Cathodic potential step following anodic step-0.5V vs. Fc/Fc+100%
extracted
"(a) Kolbe electrolysis in the course of a chronoamperometric measurement at 3 V …" · acids=["acetic acid"], solvent=methanol, electrode=polycrystalline Pt, electrolyte=LiOH, NEt3 and NEt3+0.1 mol L−1 H2O electrolytesExcluded: not canonicalised (no canonical slug)
Acetic acid concentration in methanol electrolyte1mol L⁻¹100%
extracted
"Hence, an additional electrolyte system with 1 mol L-1 acetic acid, 0.1 mol L-1 …" · acids=["acetic acid"], solvent=methanol, electrode=polycrystalline Pt, electrolyte=methanol-based, LiOH or NEt3 baseExcluded: not canonicalised (no canonical slug)
NEt3 base concentration in methanol electrolyte0.1mol L⁻¹100%
extracted
"Hence, an additional electrolyte system with 1 mol L-1 acetic acid, 0.1 mol L-1 …" · acids=["acetic acid"], cation=NEt3H+, solvent=methanol, electrode=polycrystalline PtExcluded: not canonicalised (no canonical slug)
Anodic polarization time (Figure 1 experiment)3min100%
extracted
"(a) Kolbe electrolysis in the course of a chronoamperometric measurement at 3 V …" · acids=["acetic acid"], solvent=methanol, electrode=polycrystalline Pt, electrolyte=LiOH, NEt3 and NEt3+0.1 mol L−1 H2O electrolytesExcluded: not canonicalised (no canonical slug)
Duration of cathodic potential step10min100%
extracted
"(a) Kolbe electrolysis in the course of a chronoamperometric measurement at 3 V …" · acids=["acetic acid"], solvent=methanol, electrode=polycrystalline Pt, electrolyte=LiOH, NEt3 and NEt3+0.1 mol L−1 H2O electrolytesExcluded: not canonicalised (no canonical slug)
Anodic polarization times varied at 3 V1min100%
extracted
"Kolbe electrolysis in the course of chronoamperometric measurements at 3 V vs. F…" · acids=["acetic acid"], solvent=methanol, electrode=polycrystalline Pt, potential=3 V vs. Fc/Fc+Excluded: not canonicalised (no canonical slug)
Potential window of cyclic voltammetry-0.5V vs. Fc/Fc+95%
extracted
"The potential was cycled between -0.5 and 3 V with a scan rate of 10 mV s-1." · acids=["acetic acid"], solvent=methanol, electrode=polycrystalline Pt, electrolyte=LiOH, NEt3 and NEt3+H2O electrolytesExcluded: not canonicalised (no canonical slug)
Shift of oxidation current onset to more negative potentials with 0.1 mol L−1 water300mV95%
extracted
"In systems with 0.1 mol L-1 water present (LiOH and NEt3+H2O), the onset of oxid…" · acids=["acetic acid"], solvent=methanol, electrode=polycrystalline Pt, scan_rate=10 mV s−1Excluded: not canonicalised (no canonical slug)
LiOH base concentration in methanol electrolyte0.1mol L⁻¹95%
extracted
"in methanol containing 1 mol L-1 acetic acid and 0.1 mol L-1 LiOH (left), NEt3 (…" · acids=["acetic acid"], cation=Li+, solvent=methanol, electrode=polycrystalline PtExcluded: not canonicalised (no canonical slug)
Anodic potentials applied in chronoamperometry1V vs. Fc/Fc+95%
extracted
"We conducted chronoamperometric measurements in the EFC at three different anodi…" · acids=["acetic acid"], solvent=methanol, electrode=polycrystalline Pt, electrolyte=LiOH, NEt3 and NEt3+H2O electrolytesExcluded: not canonicalised (no canonical slug)
Internal resistance of the electroanalytical flow cell40Ω90%
electrochemical impedance
"Resistance varied between 40 and 200 Ω depending on the conductivity of the elec…" · cell=electroanalytical flow cell (EFC), acids=["acetic acid"], solvent=methanol, electrode=polycrystalline PtExcluded: not canonicalised (no canonical slug)
Anodic potential at which substantial product formation was first observed3V vs. Fc/Fc+90%
extracted
"Substantial product formation in all three electrolytes was observed first at 3 …" · acids=["acetic acid"], solvent=methanol, electrode=polycrystalline Pt, electrolyte=LiOH, NEt3 and NEt3+H2O electrolytesExcluded: not canonicalised (no canonical slug)
Onset potential of Kolbe product formation1.8V vs. Fc/Fc+90%
olems
"The Kolbe product formation occurs around 1.8 V for all electrolytes, independen…" · acids=["acetic acid"], solvent=methanol, electrode=polycrystalline Pt, scan_rate=10 mV s−1Excluded: not canonicalised (no canonical slug)
Onset potential of Pt dissolution in NEt3 electrolyte0.8V vs. Fc/Fc+90%
extracted
"Pt dissolution for the system containing NEt3 starts at around 0.8 V, approximat…" · acids=["acetic acid"], solvent=methanol, electrode=polycrystalline Pt, scan_rate=10 mV s−1Excluded: not canonicalised (no canonical slug)
Stable (steady-state) Pt dissolution rate in water-free NEt3 electrolyte90pg s⁻¹ cm⁻²90%
on-line icp-ms (electroanalytical flow cell)
"The stable value lies at around 90 pg s-1 cm-2 in the water-free system." · acids=["acetic acid"], solvent=methanol, electrode=polycrystalline Pt, potential=3 V vs. Fc/Fc+Excluded: not canonicalised (no canonical slug)
Shift of oxide reduction (cathodic dissolution) onset to negative potentials600mV85%
extracted
"The onset of the oxide reduction, which is expressed as cathodic dissolution in …" · acids=["acetic acid"], solvent=methanol, electrode=polycrystalline Pt, scan_rate=10 mV s−1Excluded: not canonicalised (no canonical slug)
Showing 25 of 32

Pipeline

Raw extractions, artifacts, quality signal

Extraction quality

honesty signal

Calibrate your trust in the extracted content against these signals — they're how the pipeline rated its own output for this paper.

Mean parameter confidence

90%

Average confidence across PaperParameter rows surfaced above

review against source PDF before citing · scores 0–1

03

Chart explorer

Move the inputs this paper used and see how the predicted outcome shifts.

04

Explore model

The reactor in 3D, with flow you can switch on and off.

05

AI insights

Contradictions, gaps and opportunities found by comparing this paper with the corpus.

06

Compare similar papers

The nearest papers by system, materials and organisms, with their outcomes side by side.

07

Source PDF

The paper as published.

No 3D model is mapped to this paper yet. The values extracted from it are listed under Extracted values.

32
Extracted values
2022
Year

Keywords

  • electrode dissolution
  • Kolbe electrolysis
  • electroorganic synthesis
  • mass spectrometry
  • online monitoring
  • electrode stability
  • platinum dissolution

Cite

Johanna Ranninger, Pavlo Nikolaienko, Karl J. J. Mayrhofer et al. (2022). On‐line Electrode Dissolution Monitoring during Organic Electrosynthesis: Direct Evidence of Electrode Dissolution during Kolbe Electrolysis. ChemSusChem. https://doi.org/10.1002/cssc.202102228