Research

Paper

Biologically Induced Hydrogen Production Drives High Rate/High Efficiency Microbial Electrosynthesis of Acetate from Carbon Dioxide

01

Summary

What the paper reports, in its own words.

AI Enhanced· 100%Resource RecoveryElectrosynthesis

Abstract

Abstract Electron‐transfer pathways occurring in biocathodes are still unknown. We demonstrate here that high rates of acetate production by microbial electrosynthesis are mainly driven by an electron flux from the electrode to carbon dioxide, occurring via biologically induced hydrogen, with (99±1) % electron recovery into acetate. Nevertheless, acetate production is shown to occur exclusively within the biofilm. The acetate producers, putatively Acetoanaerobium , showed the remarkable ability to consume a high H 2 flux before it could escape from the biofilm. At zero wastage of H 2 gas, it allows superior production rates and lesser technical bottlenecks over technologies that rely on mass transfer of H 2 to microorganisms suspended in aqueous solution. This study suggests that bacterial modification of the electrode surface (possibly via synthesis of Cu nanoparticles) is directly involved in the significant enhancement of the hydrogen production.

AI summary

100% confidence

Specialized MES research in optimization focusing on performance-optimization, substrates. Abstract Electron‐transfer pathways occurring in biocathodes are still unknown. We demonstrate her...

Generated by MESSAI extraction pipeline · review against source PDF

02

Extracted values

Every value pulled from the paper, with its source, so each number can be checked against the text.

n = 53 extracted values

Select a citation to see the quote, page and confidence behind a value.

26 of 52 extracted rows modelable

  • 18 not canonicalised (no canonical slug)
  • 8 no SI value
ParameterValueUnitConfidenceSourceNotesModelable
Substrateacetate—80%
llm
Minimum read length after trimming190bp95%
16s rrna amplicon sequencing
"Raw paired reads was first trimmed by Trimmomatic to remove short reads (less th…" · condition_hint=sequencing data processing parameterExcluded: not canonicalised (no canonical slug)
Helium carrier gas flow rate200mL min⁻¹95%
extracted
"Helium (Ultra high purity, BOC, Australia) was used as carrier gas and supplied …" · T=31°CExcluded: not canonicalised (no canonical slug)
Electron Recovery Efficiency98%95%
chronoamperometry
"The CO2 and electron recovery in this study was up to 98 ± 3 % into the final pr…" · T=31°C, substrate=co2, steady_stateModelable
Formic Acid Production Rate66kg m⁻³ electrode day⁻¹95%
chronoamperometry
"equivalent to 66 kg m-3 electrode day-1" · T=31°C, substrate=co2, steady_stateExcluded: no SI value
Specific H₂ Production115m³ H₂ m⁻³ electrode day⁻¹95%
chronoamperometry with toga sensor
"Due to the 3D nature of the electrodes (2620 m2 m-3), this rate translates to 11…" · T=31°C, pH(an)=6.7, substrate=co2, steady_stateExcluded: no SI value
Current Density (Basis Unresolved)102A m⁻²95%
chronoamperometry
"we reported a high biocathode current density of up to -102 A m-2" · T=31°C, substrate=co2, steady_stateModelable
SEM acceleration voltage20Outside physical range, check sourcekV95%
sem
"Samples were imaged at 20 kV acceleration" · condition_hint=SEM imaging parameterExcluded: not canonicalised (no canonical slug)
Specific H₂ Production1.15m³ H₂ m⁻² electrode day⁻¹95%
chronoamperometry with toga sensor
"biologically-induced hydrogen production at high rate (1.15 m3 H2 m-2 electrode …" · T=31°C, pH(an)=6.7, substrate=co2, steady_stateExcluded: no SI value
Cathodic Hydrogen Recovery95%95%
chronoamperometry with toga sensor
"electron recovery into H2 as the end-product went up to 95 ± 3%" · T=31°C, pH(an)=6.7, steady_stateModelable
Acetic Acid Concentration11g L⁻¹95%
chronoamperometry
"a high acetic acid titer of up to 11 g L-1 could be reached" · T=31°C, substrate=co2, steady_stateModelable
Electron Recovery Efficiency99%95%
chronoamperometry with toga sensor
"about 99 ± 1% of the total electrons consumed were assimilated into acetate" · T=31°C, pH(an)=6.7, substrate=co2, steady_stateModelable
Cyclic Voltammetry Scan Rate0.1mV s⁻¹95%
linear sweep voltammetry
"The potential was scanned from 0 to -1.0 V vs. SHE, unless otherwise specified, …" · T=31°C, pH(an)=6.7Modelable
SEM spot size6dimensionless95%
sem
"6.0 spot size" · condition_hint=SEM imaging parameterExcluded: not canonicalised (no canonical slug)
Electrochemical oxidation duration (first step)30min95%
cyclic voltammetry
"Both cathodes were then electrochemically oxidized at +0.2 V vs. SHE for 30 min …" · T=31°C, pH(an)=7Excluded: not canonicalised (no canonical slug)
Coulombic efficiency95%95%
chronoamperometry with toga sensor
"the performance of these biocathodes reached H2 production rates of about 1.15 m…" · T=31°C, pH(an)=6.7, steady_stateModelable
Current Density (Areal)2A m⁻²95%
chronoamperometry with toga sensor
"Significantly lower, and constant, current density of about -2 A m-2 was recorde…" · T=31°C, pH(an)=6.7, substrate=co2, steady_stateModelable
Electrode Surface Area2,620m² m⁻³95%
extracted
"Due to the 3D nature of the electrodes (2620 m2 m-3)" · condition_hint=design parameter, 3D electrode structure, electrode_material=EPD-3D 45ppiExcluded: no SI value
Electrochemical oxidation duration (third step)30min95%
cyclic voltammetry
"and finally at +0.4 V vs. SHE for 30 min" · T=31°C, pH(an)=7Excluded: not canonicalised (no canonical slug)
Temperature control31°C95%
extracted
"The temperature was controlled at 31 ± 1 ºC throughout all the tests" · T=31°CExcluded: not canonicalised (no canonical slug)
DNA extraction amount300ng95%
16s rrna amplicon sequencing
"300 ng DNA of each sample were provided to the Australian Centre for Ecogenomics…" · condition_hint=microbial community analysis parameterExcluded: not canonicalised (no canonical slug)
Electrochemical oxidation duration (second step)60min95%
cyclic voltammetry
"CVs were recorded after further electrochemical oxidation at +0.2 V vs. SHE for …" · T=31°C, pH(an)=7Excluded: not canonicalised (no canonical slug)
OTU phylogenetic distance threshold1%95%
16s rrna amplicon sequencing
"open-reference OTU picking strategy by uclust at 1% phylogenetic distance" · condition_hint=OTU analysis parameterExcluded: not canonicalised (no canonical slug)
Minimum quality score after trimming20Phred⁻³³95%
16s rrna amplicon sequencing
"low quality (lower than Phred-33 of 20)" · condition_hint=sequencing data processing parameterExcluded: not canonicalised (no canonical slug)
OTU normalization reads per sample40,000reads95%
16s rrna amplicon sequencing
"In house script "Normaliser" (https://github.com/minillinim/Normaliser) was used…" · condition_hint=OTU analysis parameterExcluded: not canonicalised (no canonical slug)
Showing 25 of 53

Methodology

What was the system and how was it run

Methodology

Methodology

The study employed microbial electrosynthesis to produce acetate from carbon dioxide, utilizing a biocathode with a biofilm that consumes hydrogen gas produced by the electrode.

Performance metrics

FieldValue
citation count131

Operational parameters

FieldValue
substrate["acetate"]

Operating conditions

21 runs extracted
RunT°CpHanpHcatSubstrate[S]mg/LHRThModeR_extΩV_appVInoculum
v2-06344b74cd051acb316.7—co2——steady_state—-0.85—
v2-070866d2c14cc180312————————
v2-1de8f27b051b5ff5317——————0.4—
v2-2b65ad59ab9af497—7————————
v2-3aa9ff9e2ec4e57c——————steady_state———
v2-44ad18a3a137d2b8317————————
v2-534102de825519ad312—co2——steady_state—-0.85—
v2-5be26b9552f8552b317——————0.2—
v2-5f2d75430d203136316.7————startup———
v2-6678733ebc70b516316.7————steady_state—-0.85—
v2-766323c3352cf469—6.7————————
v2-92657e6938685e1b31——co2——steady_state—-0.85—
v2-a3119cb8665620e2——————startup———
v2-b80eddf41eaff0af—6.7————transient———
v2-ce2c8c3219e0ddbd—2————————
v2-d9d826f5f2b8062531——co2——————
v2-dc4ed55eb4b85854316.7————————
v2-dfb01de5f320a25031—————————
v2-e51fd061a14d18dd—2————steady_state———
v2-f586e9af22985397——————————
v2-f747bbef84e660e4—6.7————steady_state———

Pipeline

Raw extractions, artifacts, quality signal

Extraction quality

honesty signal

Calibrate your trust in the extracted content against these signals — they're how the pipeline rated its own output for this paper.

Parameter completeness

38%

Fraction of expected parameters extracted

Data completeness

60%

Overall extraction coverage across fields

AI confidence

100%

Model self-reported confidence

Mean parameter confidence

90%

Average confidence across PaperParameter rows surfaced above

review against source PDF before citing · scores 0–1

03

Chart explorer

Move the inputs this paper used and see how the predicted outcome shifts.

04

Explore model

The reactor in 3D, with flow you can switch on and off.

05

AI insights

Contradictions, gaps and opportunities found by comparing this paper with the corpus.

06

Compare similar papers

The nearest papers by system, materials and organisms, with their outcomes side by side.

07

Source PDF

The paper as published.

No 3D model is mapped to this paper yet. The values extracted from it are listed under Extracted values.

110amperes per square metre
Best result · Current density
best of 7
53
Extracted values
2016
Year

Keywords

  • Electrosynthesis
  • Carbon dioxide
  • Hydrogen production
  • Biofilm
  • Electron transfer
  • Chemical engineering

Cite

Ludovic Jourdin, Yang Lu, Victoria Flexer et al. (2016). Biologically Induced Hydrogen Production Drives High Rate/High Efficiency Microbial Electrosynthesis of Acetate from Carbon Dioxide. ChemElectroChem. https://doi.org/10.1002/celc.201500530