Research

Paper · MFC

Microbial Biocathode Catalyzing Oxygen Reduction and Processing Nitrification

01

Summary

What the paper reports, in its own words.

3D Interactive ModelAI Enhanced· 70%Wastewater Treatment

Abstract

Oxygen biocathodes with electroactive biofilms on graphite electrodes were developed consistently and reproducibly from wastewater inoculum under a high ammonium content selective pressure in a batch microbial fuel cell configuration using ferrocyanide at the anode. The microbial biocathodes process nitrification reactions and catalyse the reduction of molecular oxygen with an onset potential of 0.0 V vs. Ag /AgCl, and a current density at -0.28 V of j = -296 μA/cm² at pH 7 and 20 °C under oxygen saturation (Cf. Figure).These biofilms also reduce hydrogen peroxide (not shown) at +0.25 V, the potential of an electroactive species in the biofilm (Cf. Figure). The nitrification reactions performed by the biofilm are found to be associated with the catalytic reduction of dioxygen. Nitrification reactions were studied by assaying the nitrogen species (ammonium, nitrite and nitrate) and the effect of adding hydroxylamine, an intermediate of the enzymatic oxidation of ammonium. Metagenomic studies via 16S rRNA gene sequencing of the biofilms onto the colonized electrodes were performed 4 week after inoculation. These studies show that the cathodic biofilms were significantly enriched with Cupriavidus, a proteobacteria genus, that is likely to be responsible for the catalytic properties of the microbial biocathode. The Figure shows the reduction of molecular oxygen by a colonized electrode at pH 7 and 20 °C in a 0.1 M fresh phosphate buffer as recorded with slow scan rate cyclic voltammetry. Scan rate: 1 mV/s. Green: abiotic graphite electrode under oxygen saturation. Black: biocathode under argon saturation. Red: biocathode under air. Blue: biocathode under oxygen saturation. Note also the chemically reversible system found at +0.25 V and assigned to the biofilm. Catalytic hydrogen peroxide reduction (not shown) occurs at the potential of this system. Figure 1

AI summary

70% confidence

This MFC study oxygen biocathodes with electroactive biofilms on graphite electrodes were developed consistently and reproducibly from wastewater inoculum under a high ammonium content selective pressure in a batch microbial fuel cell configuration using ferrocyanide at the anode. The microbial biocathodes process nitrification reactions and catalyse the reduction of molecular oxygen with an onset potential of 0.

Generated by MESSAI extraction pipeline · review against source PDF

Key findings

  • 28 V of j = -296 μA/cm² at pH 7 and 20 °C under oxygen saturation (Cf.
  • The Figure shows the reduction of molecular oxygen by a colonized electrode at pH 7 and 20 °C in a 0.
02

Extracted values

Every value pulled from the paper, with its source, so each number can be checked against the text.

n = 9 extracted values

Select a citation to see the quote, page and confidence behind a value.

0 of 6 extracted rows modelable

  • 1 not canonicalised (no canonical slug)
  • 5 no SI value
ParameterValueUnitConfidenceSourceModelable
Substratewastewater—80%
llm
Temperature[object Object]°C80%
llm
pH[object Object]—80%
llm
Inoculum sourceunder a high ammonium content selective pressure in a batch microbial fuel cell configuration using ferrocyanide at the anode—80%
extracted
Excluded: no SI value
Cathode materialbiocathode—60%
extracted
Excluded: no SI value
Electrode materialgraphite—50%
extracted
Excluded: not canonicalised (no canonical slug)
Maximum Current Density2.96mA/m²50%
extracted
Excluded: no SI value
Anode materialferrocyanide—50%
extracted
Excluded: no SI value
Cathode materialgraphite—50%
extracted
Excluded: no SI value

Methodology

What was the system and how was it run

Methodology

Methodology

The researchers developed microbial biocathodes by inoculating wastewater into a batch microbial fuel cell configuration under high ammonium content selective pressure, using ferrocyanide at the anode.

System configuration

FieldValue
system typeMFC

Electrode specifications

FieldValue
materials["graphite"]

Biological parameters

FieldValue
inoculum sourceunder a high ammonium content selective pressure in a batch microbial fuel cell configuration using ferrocyanide at the anode
microbial communitygenus

Operational parameters

FieldValue
p h{"min":7,"max":7,"optimal":7}
temperature{"min":20,"max":20,"optimal":20}
substrate["wastewater"]

Pipeline

Raw extractions, artifacts, quality signal

Extraction quality

honesty signal

Calibrate your trust in the extracted content against these signals — they're how the pipeline rated its own output for this paper.

Parameter completeness

50%

Fraction of expected parameters extracted

Data completeness

50%

Overall extraction coverage across fields

AI confidence

70%

Model self-reported confidence

Mean parameter confidence

64%

Average confidence across PaperParameter rows surfaced above

review against source PDF before citing · scores 0–1

03

Chart explorer

Move the inputs this paper used and see how the predicted outcome shifts.

04

Explore model

The reactor in 3D, with flow you can switch on and off.

05

AI insights

Contradictions, gaps and opportunities found by comparing this paper with the corpus.

06

Compare similar papers

The nearest papers by system, materials and organisms, with their outcomes side by side.

loading 3D model…

Representative model, generic MFC

Representative MFC — matched on the paper’s system type only, not its reactor or geometry.

MFC
System
0.00amperes per square metre
Best result · Current density
9
Extracted values
2020
Year

Keywords

  • Microbial fuel cell
  • Biofilm
  • Inorganic chemistry
  • Nitrification

Cite

Frédéric Barrière, Thomas Flinois (2020). Microbial Biocathode Catalyzing Oxygen Reduction and Processing Nitrification. ECS Meeting Abstracts. https://doi.org/10.1149/ma2020-01472686mtgabs

Open in lab for full controls, parameter editing, and template overlays.

Open in lab