Paper · MFC
Integration of microbial fuel cell techniques into activated sludge wastewater treatment processes to improve nitrogen removal and reduce sludge production
Summary
What the paper reports, in its own words.
Abstract
Bioelectrochemical systems are emerging for wastewater treatment, yet little is known about how well they can be integrated with current wastewater treatment processes. In this bench-scale study, the microbial fuel cell (MFC) technique was incorporated into the Modified Ludzack-Ettinger (MLE) process (phase I) and later with the membrane bioreactor (MBR) process (phase II) to evaluate the performance of MFC assisted wastewater treatment systems (i.e., MLE-MFC and MBR-MFC). There was no significant difference in the effluent NH₄⁺-N concentration between the systems integrating MFC and the open circuit controls. The average effluent COD concentration was significantly lower in the MLE-MFC, but it did not change much in the MBR-MFC because of the already low COD concentrations in MBR operation. The MLE-MFC and MBR-MFC systems increased the NO₃⁻-N removal efficiencies by 31% (±12%) and 20% (±12%), respectively, and reduced sludge production by 11% and 6%, respectively, while generating an average voltage of 0.13 (±0.03) V in both systems. Analysis of the bacterial specific oxygen uptake rate, the sludge volume index, and ammonia-oxidizing bacterial population (dominated by Nitrosomonas through terminal restriction fragment length polymorphism analysis) indicated that there was no significant difference in sludge activity, settling property, and nitrifying community structure between the MFC assisted systems and the open circuit controls. The results suggest that the wastewater treatment systems could achieve higher effluent water quality and lower sludge production if it is integrated well with MFC techniques.
Extracted values
Every value pulled from the paper, with its source, so each number can be checked against the text.
n = 1 extracted value
Select a citation to see the quote, page and confidence behind a value.
| Parameter | Value | Unit | Confidence | Source |
|---|---|---|---|---|
| Substrate | wastewater | — | 80% | llm |
Pipeline
Raw extractions, artifacts, quality signal
Extraction quality
honesty signalCalibrate your trust in the extracted content against these signals — they're how the pipeline rated its own output for this paper.
Parameter completeness
25%
Fraction of expected parameters extracted
Data completeness
40%
Overall extraction coverage across fields
AI confidence
55%
Model self-reported confidence
Mean parameter confidence
80%
Average confidence across PaperParameter rows surfaced above
review against source PDF before citing · scores 0–1
Chart explorer
Move the inputs this paper used and see how the predicted outcome shifts.
Explore model
The reactor in 3D, with flow you can switch on and off.
AI insights
Contradictions, gaps and opportunities found by comparing this paper with the corpus.
Compare similar papers
The nearest papers by system, materials and organisms, with their outcomes side by side.
Representative model, generic MFC
Tap to interactRepresentative model, generic MFC
Representative MFC — matched on the paper’s system type only, not its reactor or geometry.
Keywords
- Activated sludge
- Microbial fuel cell
- Sewage treatment
- Waste management
- Wastewater
- Nitrogen
Cite
Shashikanth Gajaraj, Zhiqiang Hu (2014). Integration of microbial fuel cell techniques into activated sludge wastewater treatment processes to improve nitrogen removal and reduce sludge production. Chemosphere. https://doi.org/10.1016/j.chemosphere.2014.06.013
- PubMed
- 25014565
- Journal
- Chemosphere
Open in lab for full controls, parameter editing, and template overlays.
Open in lab