Research

Paper · MFC

A decentralized wastewater treatment system using microbial fuel cell techniques and its response to a copper shock load

01

Summary

What the paper reports, in its own words.

3D Interactive ModelWastewater Treatment

Abstract

Bench-scale decentralized wastewater treatment systems using microbial fuel cell (MFC) techniques were constructed for simultaneous removal of carbonaceous and nitrogenous pollutants and electricity production from wastewater. The MFC was operated in continuous mode and immobilized Paracoccus pantotrophus cells were added in the cathodic compartment to achieve simultaneous nitrification-denitrification. After 150-day operation, the MFC system could effectively remove >96% COD and 100% ammonium, with 60-80% total nitrogen removal and around 0.2V voltage production. The results of copper (Cu) shock load showed that although 125 mg L⁻¹ Cu (II) would deteriorate the effluent quality and completely inhibit the electricity production, the microbial populations restored their ability to treat wastewater and produce electricity after a period around 30 days. Community analysis by the 454 pyrosequencing technique showed that the microbial compositions were significantly different and decreased in diversity after the Cu shock load.

02

Extracted values

Every value pulled from the paper, with its source, so each number can be checked against the text.

n = 3 extracted values

Select a citation to see the quote, page and confidence behind a value.

0 of 2 extracted rows modelable

  • 1 not canonicalised (no canonical slug)
  • 1 no SI value
ParameterValueUnitConfidenceSourceModelable
Substratewastewater—80%
llm
Electrode materialcopper—50%
extracted
Excluded: not canonicalised (no canonical slug)
Cathode materialimmobilized Paracoccus pantotrophus cells—50%
extracted
Excluded: no SI value

Pipeline

Raw extractions, artifacts, quality signal

Extraction quality

honesty signal

Calibrate your trust in the extracted content against these signals — they're how the pipeline rated its own output for this paper.

Parameter completeness

38%

Fraction of expected parameters extracted

Data completeness

40%

Overall extraction coverage across fields

AI confidence

55%

Model self-reported confidence

Mean parameter confidence

60%

Average confidence across PaperParameter rows surfaced above

review against source PDF before citing · scores 0–1

03

Chart explorer

Move the inputs this paper used and see how the predicted outcome shifts.

04

Explore model

The reactor in 3D, with flow you can switch on and off.

05

AI insights

Contradictions, gaps and opportunities found by comparing this paper with the corpus.

06

Compare similar papers

The nearest papers by system, materials and organisms, with their outcomes side by side.

loading 3D model…

Representative model, generic MFC

Representative MFC — matched on the paper’s system type only, not its reactor or geometry.

MFC
System
3
Extracted values
2013
Year

Keywords

  • Microbial fuel cell
  • Wastewater
  • Effluent
  • Pulp and paper industry
  • Sewage treatment
  • Nitrification

Cite

Cuijie Feng, Anyi Hu, Shaohua Chen et al. (2013). A decentralized wastewater treatment system using microbial fuel cell techniques and its response to a copper shock load. Bioresource Technology. https://doi.org/10.1016/j.biortech.2013.05.038

PubMed
23777848

Open in lab for full controls, parameter editing, and template overlays.

Open in lab