Research

Paper · MFC

Integrated Photo-Bioelectrochemical System for Contaminants Removal and Bioenergy Production

01

Summary

What the paper reports, in its own words.

3D Interactive ModelPower Generation

Abstract

An integrated photobioelectrochemical (IPB) system was developed by installing a microbial fuel cell (MFC) inside an algal bioreactor. This system achieves the simultaneous removal from a synthetic solution of organics (in the MFC) and nutrients (in the algal bioreactor), and the production of bioenergy in electricity and algal biomass through bioelectrochemical and microbiological processes. During the one-year operation, the IPB system removed more than 92% of chemical oxygen demand, 98% of ammonium nitrogen, and 82% of phosphate and produced a maximum power density of 2.2 W/m³ and 128 mg/L of algal biomass. The algal growth provided dissolved oxygen to the cathode reaction of the MFC, whereas electrochemical oxygen reduction on the MFC cathode buffered the pH of the algal growth medium (which was also the catholyte). The system performance was affected by illumination and dissolved oxygen. Initial energy analysis showed that the IPB system could theoretically produce enough energy to cover its consumption; however, further improvement of electricity production is desired. An analysis of the attached and suspended microbes in the cathode revealed diverse bacterial taxa typical of aquatic and soil bacterial communities with functional roles in contaminant degradation and nutrient cycling.

02

Extracted values

Every value pulled from the paper, with its source, so each number can be checked against the text.

n = 1 extracted value

Select a citation to see the quote, page and confidence behind a value.

0 of 1 extracted rows modelable

  • 1 no SI value
ParameterValueUnitConfidenceSourceModelable
Maximum power density2,200mW/m²50%
extracted
Excluded: no SI value

Pipeline

Raw extractions, artifacts, quality signal

Extraction quality

honesty signal

Calibrate your trust in the extracted content against these signals — they're how the pipeline rated its own output for this paper.

Parameter completeness

13%

Fraction of expected parameters extracted

Data completeness

30%

Overall extraction coverage across fields

AI confidence

70%

Model self-reported confidence

Mean parameter confidence

50%

Average confidence across PaperParameter rows surfaced above

review against source PDF before citing · scores 0–1

03

Chart explorer

Move the inputs this paper used and see how the predicted outcome shifts.

04

Explore model

The reactor in 3D, with flow you can switch on and off.

05

AI insights

Contradictions, gaps and opportunities found by comparing this paper with the corpus.

06

Compare similar papers

The nearest papers by system, materials and organisms, with their outcomes side by side.

loading 3D model…

Representative model, generic MFC

Representative MFC — matched on the paper’s system type only, not its reactor or geometry.

MFC
System
2200milliwatts per square metre
Best result · Power density
1
Extracted values
2012
Year

Keywords

  • Microbial fuel cell
  • Bioenergy
  • Bioreactor
  • Biomass (ecology)
  • Chemical oxygen demand
  • Environmental chemistry

Cite

Li Xiao, Erica B. Young, John A. Berges et al. (2012). Integrated Photo-Bioelectrochemical System for Contaminants Removal and Bioenergy Production. Environmental Science & Technology. https://doi.org/10.1021/es303144n

PubMed
22998430

Open in lab for full controls, parameter editing, and template overlays.

Open in lab