Paper · MFC
Performance of denitrifying microbial fuel cell subjected to variation in pH, COD concentration and external resistance
Summary
What the paper reports, in its own words.
Abstract
The effects of pH, chemical oxygen demand (COD) concentration and external resistance on denitrifying microbial fuel cell were evaluated in terms of electricity generation characteristics and pollutant removal performance. The results showed that anodic influent with weakly alkaline or neutral pH and cathodic influent with weakly acidic pH favored pollutant removal and electricity generation. The suitable influent pH of the anode and cathode were found to be 7.5–8.0 and 6.0–6.5, respectively. In the presence of sufficient nitrate in the cathode, higher influent COD concentration led to more electricity generation and greater pollutant removal rates. With an anodic influent pH of 8.0 and a cathodic influent pH of 6.0, an influent COD concentration of 400 mg/L was deemed to be appropriate. Low external resistance favored nitrate and COD removal. The results suggest that operation of denitrifying microbial fuel cell at a lower external resistance would be desirable for pollutant removal but not electricity generation.
AI summary: matches the abstract (70% confidence) · review against source PDF
Extracted values
Every value pulled from the paper, with its source, so each number can be checked against the text.
n = 3 extracted values
Select a citation to see the quote, page and confidence behind a value.
0 of 2 extracted rows modelable
- 2 no SI value
| Parameter | Value | Unit | Confidence | Source | Modelable |
|---|---|---|---|---|---|
| pH | [object Object] | — | 80% | llm | |
| Anode material | and cathode were found to be 7 | — | 70% | extracted | Excluded: no SI value |
| Cathode material | were found to be 7 | — | 70% | extracted | Excluded: no SI value |
Methodology
What was the system and how was it run
Methodology
Methodology
The effects of pH, COD concentration, and external resistance on denitrifying microbial fuel cells were evaluated through experimentation.
System configuration
| Field | Value |
|---|---|
| system type | MFC |
Performance metrics
| Field | Value |
|---|---|
| citation count | 25 |
Operational parameters
| Field | Value |
|---|---|
| p h | {"min":6,"max":8,"optimal":8} |
Pipeline
Raw extractions, artifacts, quality signal
Extraction quality
honesty signalCalibrate your trust in the extracted content against these signals — they're how the pipeline rated its own output for this paper.
Parameter completeness
25%
Fraction of expected parameters extracted
Data completeness
50%
Overall extraction coverage across fields
AI confidence
70%
Model self-reported confidence
Mean parameter confidence
73%
Average confidence across PaperParameter rows surfaced above
review against source PDF before citing · scores 0–1
Chart explorer
Move the inputs this paper used and see how the predicted outcome shifts.
Explore model
The reactor in 3D, with flow you can switch on and off.
AI insights
Contradictions, gaps and opportunities found by comparing this paper with the corpus.
Compare similar papers
The nearest papers by system, materials and organisms, with their outcomes side by side.
Representative model, generic MFC
Tap to interactRepresentative model, generic MFC
Representative MFC — matched on the paper’s system type only, not its reactor or geometry.
Keywords
- Denitrifying bacteria
- Microbial fuel cell
- Pollutant
- Chemical oxygen demand
- Nitrate
- Environmental chemistry
Cite
Jin-Tao Li, Shao-Hui Zhang, Yu-Mei Hua (2013). Performance of denitrifying microbial fuel cell subjected to variation in pH, COD concentration and external resistance. Water Science and Technology. https://doi.org/10.2166/wst.2013.250
- Journal
- Water Science and Technology
Open in lab for full controls, parameter editing, and template overlays.
Open in lab