Paper · MFC
Effect of the Electrodes Type on the Energy Efficiency of Microbial Fuel Cells
Summary
What the paper reports, in its own words.
Abstract
Traditional methods for wastewater treatment are associated with high energy consumption. This is why biological treatment of water is more appropriate at the moment. In our previous study, oxidation and reduction of pollutants have been proposed to be carried out in a microbial fuel cell (MFC) designed by our laboratory that simultaneously purifies wastewater from sulfide and nitrate ions and generates electricity. The experiments were carried out with two types of electrodes, graphite rods and paddling of activated carbon using a Fumapem® FFA-3-PK-75 (OH- form) membrane. The results show that the cell has higher energy output when using paddling of activated carbon as an electrode.
AI summary: matches the abstract (70% confidence) · review against source PDF
Key findings
- Using paddling of activated carbon as an electrode increased energy output in MFCs.
- Graphite rods were less effective as electrodes in MFCs compared to paddling of activated carbon.
- The MFC design showed potential for wastewater treatment and electricity generation.
Extracted values
Every value pulled from the paper, with its source, so each number can be checked against the text.
n = 17 extracted values
Select a citation to see the quote, page and confidence behind a value.
0 of 16 extracted rows modelable
- 13 not canonicalised (no canonical slug)
- 3 no SI value
| Parameter | Value | Unit | Confidence | Source | Notes | Modelable |
|---|---|---|---|---|---|---|
| Substrate | wastewater | — | 80% | llm | ||
| Membrane material | PEM | — | 80% | extracted | Excluded: no SI value | |
| Electrode material | graphite | — | 50% | extracted | Excluded: not canonicalised (no canonical slug) | |
| Membrane material | Fumapem® FFA-3-PK-75 (OH- form) | — | 50% | extracted | Excluded: no SI value | |
| Electrode Porosity | 80 | % | 50% | extracted | Excluded: no SI value | |
| paddling as an electrode | 80 | % | 50% | extracted | "paddling as an electrode is 80%" | Excluded: not canonicalised (no canonical slug) |
| Variable r | — | — | 0% | extracted | "r = A220nm – 2*A275nm" | Excluded: not canonicalised (no canonical slug) |
| Variable m | — | — | 0% | extracted | "r = A220nm – 2*A275nm" | Excluded: not canonicalised (no canonical slug) |
| Reductases | — | — | 0% | extracted | "reductases is lower than that of nitrate reductases," | Excluded: not canonicalised (no canonical slug) |
| Amount | — | — | 0% | extracted | "r = A220nm – 2*A275nm" | Excluded: not canonicalised (no canonical slug) |
| Disadvantage | — | — | 0% | extracted | "disadvantage is their enzyme or inorganic molecule," | Excluded: not canonicalised (no canonical slug) |
| Biocatalys | — | — | 0% | extracted | "Biocatalysis Research Progress," | Excluded: not canonicalised (no canonical slug) |
| MFC | — | — | 0% | extracted | "MFC is influenced by many factors," | Excluded: not canonicalised (no canonical slug) |
| Variable A | — | — | 0% | extracted | "r = A220nm – 2*A275nm" | Excluded: not canonicalised (no canonical slug) |
| the fuel cell power | 3 | times | 0% | extracted | "the fuel cell power is 3 times" | Excluded: not canonicalised (no canonical slug) |
| Wad | — | — | 0% | extracted | "wad is used as an electrode in the anode compartment," | Excluded: not canonicalised (no canonical slug) |
| Supernatant | — | — | 0% | extracted | "supernatant is As a result," | Excluded: not canonicalised (no canonical slug) |
Methodology
What was the system and how was it run
Methodology
Methodology
The study used a MFC designed by the laboratory with two types of electrodes: graphite rods and paddling of activated carbon.
System configuration
| Field | Value |
|---|---|
| reactor type | cylindrical |
| chamber config | single |
| membrane type | PEM |
| electrode geometry | {"surfaceArea":{"unit":"m2","value":0.1}} |
Electrode specifications
| Field | Value |
|---|---|
| anode material | graphite rod |
| anode vendor | using graphite rods as electrodes |
| cathode material | Pt |
| materials vendors | 2 entries |
Biological parameters
| Field | Value |
|---|---|
| inoculum source | sulfide and https://doi |
| dominant species | 2 entries |
Operational parameters
| Field | Value |
|---|---|
| substrate | ["wastewater"] |
Pipeline
Raw extractions, artifacts, quality signal
Extraction quality
honesty signalCalibrate your trust in the extracted content against these signals — they're how the pipeline rated its own output for this paper.
Parameter completeness
38%
Fraction of expected parameters extracted
Data completeness
50%
Overall extraction coverage across fields
AI confidence
70%
Model self-reported confidence
Mean parameter confidence
21%
Average confidence across PaperParameter rows surfaced above
review against source PDF before citing · scores 0–1
Chart explorer
Move the inputs this paper used and see how the predicted outcome shifts.
Explore model
The reactor in 3D, with flow you can switch on and off.
AI insights
Contradictions, gaps and opportunities found by comparing this paper with the corpus.
Compare similar papers
The nearest papers by system, materials and organisms, with their outcomes side by side.
Representative model, generic MFC
Tap to interactRepresentative model, generic MFC
Representative MFC — matched on the paper’s system type only, not its reactor or geometry.
Keywords
- Microbial fuel cell
- Wastewater
- Electrode
- Graphite
- Activated carbon
- Pollutant
Cite
Tsvetomila Ivanova Parvanova-Mancheva, Elena Razkazova-Velkova, Martin Martinov et al. (2018). Effect of the Electrodes Type on the Energy Efficiency of Microbial Fuel Cells. Food Science and Applied Biotechnology. https://doi.org/10.30721/fsab2018.v1.i2.6
Open in lab for full controls, parameter editing, and template overlays.
Open in lab