Paper · MFC
Municipal Solid Waste Leachate Treatment Using Microbial Fuel Cell
Summary
What the paper reports, in its own words.
Abstract
Leachate is a high concentration organic wastewater, and microbial fuel cell (MFC) is capable of decomposing and treating organic pollutants directly. Single-chamber MFC using landfill leachate as anolyte was built to get rid of BOD and ammonia-nitrogen organic pollutant in leachate. The use of MFC led to the treatment of the biodegradable organic pollutant of municipal solid waste leachate and the production of electricity. The biofilm was detected on the MFC anode carbon felt, the voltage and power output were achieved 292.7± 5 mV and 2375.1mW.m⁻². The suitable running time was about 10 days, when the BOD and ammonia-nitrogen removal efficiencies were achieved about 93.0% and 84.1 %, respectively.
AI summary: matches the abstract (60% confidence) · review against source PDF
Key findings
- BOD removal efficiency: 93.0%
Extracted values
Every value pulled from the paper, with its source, so each number can be checked against the text.
n = 6 extracted values
Select a citation to see the quote, page and confidence behind a value.
0 of 5 extracted rows modelable
- 3 not canonicalised (no canonical slug)
- 2 no SI value
| Parameter | Value | Unit | Confidence | Source | Modelable |
|---|---|---|---|---|---|
| Substrate | wastewater,landfill leachate | — | 80% | llm | |
| Reactor type | single-chamber | — | 80% | extracted | Excluded: not canonicalised (no canonical slug) |
| Chambers | 1 | — | 80% | extracted | Excluded: not canonicalised (no canonical slug) |
| Electrode material | carbon felt | — | 50% | extracted | Excluded: not canonicalised (no canonical slug) |
| Maximum power density | 2,380 | mW/m² | 50% | extracted | Excluded: no SI value |
| Anode material | carbon felt | — | 50% | extracted | Excluded: no SI value |
Methodology
What was the system and how was it run
Methodology
Methodology
A single-chamber MFC using landfill leachate as anolyte was built to treat organic pollutants.
Electrode specifications
| Field | Value |
|---|---|
| materials | ["carbon felt"] |
Performance metrics
| Field | Value |
|---|---|
| citation count | 1 |
Operational parameters
| Field | Value |
|---|---|
| substrate | ["wastewater","landfill leachate"] |
Pipeline
Raw extractions, artifacts, quality signal
Extraction quality
honesty signalCalibrate your trust in the extracted content against these signals — they're how the pipeline rated its own output for this paper.
Parameter completeness
50%
Fraction of expected parameters extracted
Data completeness
60%
Overall extraction coverage across fields
AI confidence
60%
Model self-reported confidence
Mean parameter confidence
65%
Average confidence across PaperParameter rows surfaced above
review against source PDF before citing · scores 0–1
Chart explorer
Move the inputs this paper used and see how the predicted outcome shifts.
Explore model
The reactor in 3D, with flow you can switch on and off.
AI insights
Contradictions, gaps and opportunities found by comparing this paper with the corpus.
Compare similar papers
The nearest papers by system, materials and organisms, with their outcomes side by side.
Representative model, generic MFC
Tap to interactRepresentative model, generic MFC
Representative MFC — matched on the paper’s system type only, not its reactor or geometry.
Keywords
- Leachate
- Microbial fuel cell
- Waste management
- Pollutant
- Municipal solid waste
- Wastewater
Cite
Li Fang Deng, Hao Ran Yuan, Hong Yu Huang et al. (2012). Municipal Solid Waste Leachate Treatment Using Microbial Fuel Cell. Advanced Materials Research. https://doi.org/10.4028/www.scientific.net/amr.610-613.2361
- Journal
- Advanced Materials Research
Open in lab for full controls, parameter editing, and template overlays.
Open in lab