Research

Paper · MFC

Simultaneous carbon and nitrogen removal using a litre-scale upflow microbial fuel cell

01

Summary

What the paper reports, in its own words.

3D Interactive ModelAI Enhanced· 70%Wastewater Treatment

Abstract

A 10 L upflow microbial fuel cell (UMFC) was constructed for simultaneous carbon and nitrogen removal. During the 6-month operation, the UMFC constantly removed carbon and nitrogen, and then generated electricity with synthetic wastewater as substrate. At 5.0 mg L⁻¹ dissolved oxygen, 100 Ω external resistance, and pH 6.5, the maximum power density (Pmax) and nitrification rate for the UMFC was 19.5 mW m⁻² and 17.9 mg·(L d)−1, respectively. In addition, Pmax in the UMFC with chicken manure wastewater as substrate was 16 mW m⁻², and a high chemical oxygen demand (COD) removal efficiency of 94.1% in the UMFC was achieved at 50 mM phosphate-buffered saline. Almost all ammonia in the cathode effluent was effectively degraded after biological denitrification in the UMFC cathode. The results can help to further develop pilot-scale microbial fuel cells for simultaneous carbon and nitrogen removal.

AI summary: matches the abstract (70% confidence) · review against source PDF

02

Extracted values

Every value pulled from the paper, with its source, so each number can be checked against the text.

n = 8 extracted values

Select a citation to see the quote, page and confidence behind a value.

0 of 4 extracted rows modelable

  • 1 not canonicalised (no canonical slug)
  • 3 no SI value
ParameterValueUnitConfidenceSourceModelable
Substratewastewater—80%
llm
Coulombic efficiency94.1%80%
llm
pH[object Object]—80%
llm
Volume10mL80%
llm
Inoculum sourcemanure—80%
extracted
Excluded: no SI value
Maximum power density19.5mW/m²60%
extracted
Excluded: no SI value
Internal resistance100Ω50%
extracted
Excluded: not canonicalised (no canonical slug)
Maximum power density[19.5, 16]mW/m²50%
extracted
Excluded: no SI value

Literature priors

Distribution

Against the literature

The author’s reported value (▼) sits on top of the literature distribution from MESS-Parameters. Values outside the band are flagged as outliers.

Coulombic efficiency94.1percent

Methodology

What was the system and how was it run

Methodology

Methodology

A 10 L upflow microbial fuel cell (UMFC) was constructed and operated for 6 months with varying substrates and conditions to evaluate its performance in simultaneous carbon and nitrogen removal.

System configuration

FieldValue
system typeMFC

Biological parameters

FieldValue
inoculum sourcemanure

Performance metrics

FieldValue
coulombic efficiency94.1
citation count5

Operational parameters

FieldValue
p h{"min":6.5,"max":6.5,"optimal":6.5}
substrate["wastewater"]

Electrochemical data

FieldValue
max power density19.5

Outcomes

What was measured and what worked

Key takeaways

Coulombic efficiency

electrochemistry

94.1percent

Pipeline

Raw extractions, artifacts, quality signal

Extraction quality

honesty signal

Calibrate your trust in the extracted content against these signals — they're how the pipeline rated its own output for this paper.

Parameter completeness

75%

Fraction of expected parameters extracted

Data completeness

80%

Overall extraction coverage across fields

AI confidence

70%

Model self-reported confidence

Mean parameter confidence

70%

Average confidence across PaperParameter rows surfaced above

review against source PDF before citing · scores 0–1

03

Chart explorer

Move the inputs this paper used and see how the predicted outcome shifts.

04

Explore model

The reactor in 3D, with flow you can switch on and off.

05

AI insights

Contradictions, gaps and opportunities found by comparing this paper with the corpus.

06

Compare similar papers

The nearest papers by system, materials and organisms, with their outcomes side by side.

loading 3D model…

Representative model, generic MFC

Representative MFC — matched on the paper’s system type only, not its reactor or geometry.

MFC
System
94.1percent
Best result · Coulombic efficiency
8
Extracted values
2013
Year

In this record

Organisms, parameters and materials this paper reports. Each links to its page.

Parameters · 1

Keywords

  • Microbial fuel cell
  • Chemical oxygen demand
  • Effluent
  • Wastewater
  • Denitrification
  • Carbon fibers

Cite

Ling-ling Zhao, Tian-shun Song (2013). Simultaneous carbon and nitrogen removal using a litre-scale upflow microbial fuel cell. Water Science and Technology. https://doi.org/10.2166/wst.2013.705

Open in lab for full controls, parameter editing, and template overlays.

Open in lab