Paper · MFC
Abattoir Wastewater Treatment and Energy Recovery Using a Ferricyanide-Catholyte Microbial Fuel Cell
Summary
What the paper reports, in its own words.
Abstract
The capacity of Microbial fuel cells (MFCs) to produce voltage and concurrently treat abattoir waste water was investigated in MFCs that used 0.1M potassium ferricyanide (K3[Fe(CN)6] as catholytes. Physicochemical, electrochemical and Microbiological properties of the MFCs were monitored. The open circuit voltage (OCV) readings were taken at 3 hours interval and maximum OCV of 965mV was recorded. Also, The physicochemical characteristics of the MFCs revealed that the pH decreased by 0.2 after treatment; Chemical Oxygen demand, biochemical oxygen demand, total suspended solids, ammonia, and total nitrogen reduced by 88.4%, 65.56%, 43.88%, 60% and 60% respectively. However, Phosphate increased by 54%. The bacterial isolates from the raw abattoir wastewater were Staphylococcus aureus, Bacillus cereus, Bacillus subtilis, Enterococcus faecalis, Enterobacter aerogenes, Escherichia coli and Micrococcus luteus while Enterococcus faecalis, Bacillus cereus and Escherichia coli were isolated from the biofilms on the anode. Microbial fuel cells therefore have capacities for simultaneous waste water treatment and electricity generation.
AI summary: matches the abstract (70% confidence) · review against source PDF
Key findings
- [object Object]
- [object Object]
- [object Object]
Extracted values
Every value pulled from the paper, with its source, so each number can be checked against the text.
n = 25 extracted values
Select a citation to see the quote, page and confidence behind a value.
3 of 23 extracted rows modelable
- 19 not canonicalised (no canonical slug)
- 1 no SI value
| Parameter | Value | Unit | Confidence | Source | Notes | Modelable |
|---|---|---|---|---|---|---|
| Substrate | wastewater | — | 80% | llm | ||
| Coulombic efficiency | 8.4 | % | 80% | llm | ||
| Open Circuit Voltage | 965 | mV | 95% | extracted | "The open circuit voltage (OCV) readings were taken at 3 hours interval and maxim…" · substrate=slaughterhouse_wastewater | Modelable |
| Total Suspended Solids reduction | 43.9 | % | 90% | extracted | "Chemical Oxygen demand, biochemical oxygen demand, total suspended solids, ammon…" · substrate=slaughterhouse_wastewater, steady_state | Excluded: not canonicalised (no canonical slug) |
| Biochemical Oxygen Demand reduction | 65.6 | % | 90% | extracted | "Chemical Oxygen demand, biochemical oxygen demand, total suspended solids, ammon…" · substrate=slaughterhouse_wastewater, steady_state | Excluded: not canonicalised (no canonical slug) |
| Total Nitrogen reduction | 60 | % | 90% | extracted | "Chemical Oxygen demand, biochemical oxygen demand, total suspended solids, ammon…" · substrate=slaughterhouse_wastewater, steady_state | Excluded: not canonicalised (no canonical slug) |
| Ammonium-N Removed | 60 | % | 90% | extracted | "Chemical Oxygen demand, biochemical oxygen demand, total suspended solids, ammon…" · substrate=slaughterhouse_wastewater, steady_state | Modelable |
| Phosphate increase | 54 | % | 90% | extracted | "However, Phosphate increased by 54%." · substrate=slaughterhouse_wastewater, steady_state | Excluded: not canonicalised (no canonical slug) |
| Chemical Oxygen Demand (COD) Removal | 88.4 | % | 90% | extracted | "Chemical Oxygen demand, biochemical oxygen demand, total suspended solids, ammon…" · substrate=slaughterhouse_wastewater, steady_state | Modelable |
| Biochemical oxygen demand (BOD) removal efficiency | 65.6 | % | 85% | respirometric bod5 (apha); before 2600, after 895 | "biochemical oxygen demand ... reduced by 65.56% (2600 -> 895)" · T=30°C, pH(an)=7.2, substrate=raw abattoir wastewater (unbuffered, no added nutrients), batch | Excluded: not canonicalised (no canonical slug) |
| Open circuit voltage | 965 | mV | 85% | digital multimeter, open circuit (peak at 93rd hour) | "The maximum OCV reading for potassium ferricyanide catholyte MFC is 965 mV ... p…" · T=30°C, pH(an)=7.2, substrate=raw abattoir wastewater (unbuffered, no added nutrients), batch | Excluded: not canonicalised (no canonical slug) |
| Chemical oxygen demand (COD) removal efficiency | 88.5 | % | 85% | closed reflux colorimetric cod (apha); before 9350, after 1079 | "COD ... reduced by 88.4% (Table 1: 9350 -> 1079 mg/L = 88.46%)" · T=30°C, pH(an)=7.2, substrate=raw abattoir wastewater (unbuffered, no added nutrients), batch | Excluded: not canonicalised (no canonical slug) |
| Total suspended solids (TSS) removal efficiency | 43.9 | % | 85% | gravimetric tss (apha); before 3250, after 1824 | "total suspended solids ... reduced by 43.88% (3250 -> 1824)" · T=30°C, pH(an)=7.2, substrate=raw abattoir wastewater (unbuffered, no added nutrients), batch | Excluded: not canonicalised (no canonical slug) |
| pH decrease | 0.2 | — | 85% | extracted | "The physicochemical characteristics of the MFCs revealed that the pH decreased b…" · substrate=slaughterhouse_wastewater, steady_state | Excluded: not canonicalised (no canonical slug) |
| Anolyte pH final | 7.2 | pH | 80% | ph meter (apha) | "pH Before 7.2, After 7.2 (remained constant)" · T=30°C, pH(an)=7.2, substrate=raw abattoir wastewater (unbuffered, no added nutrients), batch | Excluded: not canonicalised (no canonical slug) |
| Open circuit voltage | 347 | mV | 80% | digital multimeter, open circuit (start) | "The OCV of the MFC rose from 347 mV" · T=30°C, pH(an)=7.2, substrate=raw abattoir wastewater (unbuffered, no added nutrients), batch | Excluded: not canonicalised (no canonical slug) |
| Open circuit voltage | 781 | mV | 80% | digital multimeter, open circuit (day 20) | "on the 20th day, it ends with an OCV value of 781mV" · T=30°C, pH(an)=7.2, substrate=raw abattoir wastewater (unbuffered, no added nutrients), batch | Excluded: not canonicalised (no canonical slug) |
| Ammonia removal efficiency | 60 | % | 80% | colorimetric nh3 (apha); before 1.2, after 0.48 | "ammonia ... reduced by 60% (1.2 -> 0.48)" · T=30°C, pH(an)=7.2, substrate=raw abattoir wastewater (unbuffered, no added nutrients), batch | Excluded: not canonicalised (no canonical slug) |
| Total nitrogen removal efficiency | 60 | % | 80% | alkaline persulfate colorimetric tn (apha); before 1.05, after 0.42 | "total nitrogen reduced by 60% (1.05 -> 0.42)" · T=30°C, pH(an)=7.2, substrate=raw abattoir wastewater (unbuffered, no added nutrients), batch | Excluded: not canonicalised (no canonical slug) |
| Phosphate change | 54 | % | 80% | colorimetric phosphate (apha); before 480, after 739 (increase) | "Phosphate increased by 54% (480 -> 739)" · T=30°C, pH(an)=7.2, substrate=raw abattoir wastewater (unbuffered, no added nutrients), batch | Excluded: not canonicalised (no canonical slug) |
| Biochemical oxygen demand (BOD) final | 895 | mg/L | 70% | respirometric bod5 (apha) | "BOD After MFC treatment = 895" · T=30°C, pH(an)=7.2, substrate=raw abattoir wastewater (unbuffered, no added nutrients), batch | Excluded: not canonicalised (no canonical slug) |
| Chemical oxygen demand (COD) final | 1,080 | mg/L | 70% | closed reflux colorimetric cod (apha) | "COD After MFC treatment = 1079 (Table 1 header lists mg/ml, but text states mg/l…" · T=30°C, pH(an)=7.2, substrate=raw abattoir wastewater (unbuffered, no added nutrients), batch | Excluded: not canonicalised (no canonical slug) |
| Open circuit voltage | 0.965 | V | 60% | extracted | Excluded: not canonicalised (no canonical slug) | |
| Microbial community | l isolates from the raw abattoir wastewater were staphylococcus aureus | — | 50% | extracted | Excluded: not canonicalised (no canonical slug) | |
| Cathode material | potassium ferricyanide (K3[Fe(CN)6]) | — | 50% | extracted | Excluded: no SI value |
Literature priors
Against the literature
The author’s reported value (▼) sits on top of the literature distribution from MESS-Parameters. Values outside the band are flagged as outliers.
Methodology
What was the system and how was it run
Methodology
Methodology
MFCs used 0.1M potassium ferricyanide as catholytes to investigate voltage production and wastewater treatment.
System configuration
| Field | Value |
|---|---|
| system type | MFC |
Biological parameters
| Field | Value |
|---|---|
| microbial community | l isolates from the raw abattoir wastewater were staphylococcus aureus |
Performance metrics
| Field | Value |
|---|---|
| coulombic efficiency | 8.4 |
| citation count | 1 |
Operational parameters
| Field | Value |
|---|---|
| substrate | ["wastewater"] |
Electrochemical data
| Field | Value |
|---|---|
| open circuit voltage | 0.965 |
Operating conditions
4 runs extracted| Run | T°C | pHan | pHcat | Substrate | [S]mg/L | HRTh | Mode | R_extΩ | V_appV | Inoculum |
|---|---|---|---|---|---|---|---|---|---|---|
| cma:ferricyanide_catholyte_MFC | 30 | 7.2 | — | raw abattoir wastewater (unbuffered, no added nutrients) | 9350 | — | batch | — | — | indigenous microbes in raw abattoir wastewater (Relief market, Egbu road, Owerri, Imo state, Nigeria) |
| v2-809e3c961ab68d2d | — | — | — | slaughterhouse_wastewater | — | — | — | — | — | — |
| v2-e966d122fc104a85 | — | — | — | slaughterhouse_wastewater | — | — | steady_state | — | — | — |
| v2-f586e9af22985397 | — | — | — | — | — | — | — | — | — | — |
Outcomes
What was measured and what worked
Key takeaways
Coulombic efficiency
electrochemistry8.4percent
Pipeline
Raw extractions, artifacts, quality signal
Extraction quality
honesty signalCalibrate your trust in the extracted content against these signals — they're how the pipeline rated its own output for this paper.
Parameter completeness
63%
Fraction of expected parameters extracted
Data completeness
70%
Overall extraction coverage across fields
AI confidence
70%
Model self-reported confidence
Mean parameter confidence
80%
Average confidence across PaperParameter rows surfaced above
review against source PDF before citing · scores 0–1
Chart explorer
Move the inputs this paper used and see how the predicted outcome shifts.
Explore model
The reactor in 3D, with flow you can switch on and off.
AI insights
Contradictions, gaps and opportunities found by comparing this paper with the corpus.
Compare similar papers
The nearest papers by system, materials and organisms, with their outcomes side by side.
Source PDF
The paper as published.
Representative model, generic MFC
Tap to interactRepresentative model, generic MFC
Representative MFC — matched on the paper’s system type only, not its reactor or geometry.
In this record
Organisms, parameters and materials this paper reports. Each links to its page.
Organisms · 1
Parameters · 1
Keywords
- Microbial fuel cell
- Bacillus cereus
- Chemical oxygen demand
- Enterococcus faecalis
- Wastewater
- Micrococcus luteus
Cite
Cynthia K. Akaluka, Justinah C. Orji, Wesley Braide et al. (2016). Abattoir Wastewater Treatment and Energy Recovery Using a Ferricyanide-Catholyte Microbial Fuel Cell. International Letters of Natural Sciences. https://doi.org/10.56431/p-hni9wh
Open in lab for full controls, parameter editing, and template overlays.
Open in lab