Research

Paper · MFC

Simultaneous pollutant removal and electricity generation in denitrifying microbial fuel cell with boric acid-borate buffer solution

01

Summary

What the paper reports, in its own words.

3D Interactive ModelAI Enhanced· 60%Bioremediation

Abstract

A double-chamber denitrifying microbial fuel cell (MFC), using boric acid-borate buffer solution as an alternative to phosphate buffer solution, was set up to investigate the influence of buffer solution concentration, temperature and external resistance on electricity generation and pollutant removal efficiency. The result revealed that the denitrifying MFC with boric acid-borate buffer solution was successfully started up in 51 days, with a stable cell voltage of 205.1 ± 1.96 mV at an external resistance of 50 Ω. Higher concentration of buffer solution favored nitrogen removal and electricity generation. The maximum power density of 8.27 W/m³ net cathodic chamber was obtained at a buffer solution concentration of 100 mmol/L. An increase in temperature benefitted electricity generation and nitrogen removal. A suitable temperature for this denitrifying MFC was suggested to be 25 °C. Decreasing the external resistance favored nitrogen removal and organic matter consumption by exoelectrogens.

AI summary: matches the abstract (60% confidence) · review against source PDF

02

Extracted values

Every value pulled from the paper, with its source, so each number can be checked against the text.

n = 1 extracted value

Select a citation to see the quote, page and confidence behind a value.

ParameterValueUnitConfidenceSource
Temperature[object Object]°C80%
llm

Methodology

What was the system and how was it run

Methodology

Methodology

A double-chamber denitrifying microbial fuel cell was set up to investigate the influence of buffer solution concentration, temperature, and external resistance on electricity generation and pollutant removal efficiency.

Performance metrics

FieldValue
citation count6

Operational parameters

FieldValue
temperature{"min":25,"max":25,"optimal":25}

Pipeline

Raw extractions, artifacts, quality signal

Extraction quality

honesty signal

Calibrate your trust in the extracted content against these signals — they're how the pipeline rated its own output for this paper.

Parameter completeness

25%

Fraction of expected parameters extracted

Data completeness

50%

Overall extraction coverage across fields

AI confidence

60%

Model self-reported confidence

Mean parameter confidence

80%

Average confidence across PaperParameter rows surfaced above

review against source PDF before citing · scores 0–1

03

Chart explorer

Move the inputs this paper used and see how the predicted outcome shifts.

04

Explore model

The reactor in 3D, with flow you can switch on and off.

05

AI insights

Contradictions, gaps and opportunities found by comparing this paper with the corpus.

06

Compare similar papers

The nearest papers by system, materials and organisms, with their outcomes side by side.

loading 3D model…

Representative model, generic MFC

Representative MFC — matched on the paper’s system type only, not its reactor or geometry.

MFC
System
1
Extracted values
2015
Year

Keywords

  • Denitrifying bacteria
  • Boric acid
  • Microbial fuel cell
  • Pollutant
  • Boron
  • Nitrogen

Cite

Gang Chen, Shaohui Zhang, Meng Li et al. (2015). Simultaneous pollutant removal and electricity generation in denitrifying microbial fuel cell with boric acid-borate buffer solution. Water Science and Technology. https://doi.org/10.2166/wst.2015.032

Open in lab for full controls, parameter editing, and template overlays.

Open in lab