Paper · MSC
Flexible Single‐Layer Fabric‐Based Co‐Laminar Flow Photosynthetic Microbial Fuel Cell
Summary
What the paper reports, in its own words.
Abstract
Abstract In this study, textile‐based microbial photoelectrochemical solar cells are developed for flexible electronic device applications. Configuration of the self‐pumping microfluidic channel without a proton exchange membrane is adopted to miniaturize the biophotovoltaic device. The microchannel region of the miniature device is patterned by silk screen printing using a body‐friendly Ecoflex to maintain the flexibility of the fabric substrate. Gold nanoparticle biosynthesized Synechocystis sp. PCC 6803 biocatalyst, supercapacitive ternary nanocomposite anode, and solid‐state Ag 2 O oxidant are used to enhance the biosolar cell performance. A maximum current density of 135.1 µA cm −2 and peak power density of 14.1 µW cm −2 , which are higher than previous textile‐based microbial fuel cells, are achieved in the presence of light. The monolayer fabric‐based biosolar cell has a stable performance up to 100 and 20 cycles of stretching and twisting, respectively. The presented new platform of flexible microbial solar cells offers the development possibility of self‐sustaining wearable electronics.
AI summary: matches the abstract (70% confidence) · review against source PDF
Extracted values
Every value pulled from the paper, with its source, so each number can be checked against the text.
n = 7 extracted values
Select a citation to see the quote, page and confidence behind a value.
0 of 7 extracted rows modelable
- 1 not canonicalised (no canonical slug)
- 6 no SI value
| Parameter | Value | Unit | Confidence | Source | Modelable |
|---|---|---|---|---|---|
| Membrane material | PEM | — | 80% | extracted | Excluded: no SI value |
| Electrode material | gold | — | 50% | extracted | Excluded: not canonicalised (no canonical slug) |
| Maximum power density | 0.141 | mW/m² | 50% | extracted | Excluded: no SI value |
| Cathode material | solid-state Ag2O oxidant | — | 50% | extracted | Excluded: no SI value |
| Membrane material | none (self-pumping microfluidic channel) | — | 50% | extracted | Excluded: no SI value |
| Anode material | supercapacitive ternary nanocomposite | — | 50% | extracted | Excluded: no SI value |
| Maximum Current Density | 0.135 | mA/m² | 50% | extracted | Excluded: no SI value |
Methodology
What was the system and how was it run
Methodology
Methodology
The microchannel region of the miniature device is patterned by silk screen printing using a body-friendly Ecoflex to maintain the flexibility of the fabric substrate.
System configuration
| Field | Value |
|---|---|
| system type | MFC |
Electrode specifications
| Field | Value |
|---|---|
| materials | ["gold"] |
Performance metrics
| Field | Value |
|---|---|
| citation count | 1 |
Pipeline
Raw extractions, artifacts, quality signal
Extraction quality
honesty signalCalibrate your trust in the extracted content against these signals — they're how the pipeline rated its own output for this paper.
Parameter completeness
38%
Fraction of expected parameters extracted
Data completeness
50%
Overall extraction coverage across fields
AI confidence
70%
Model self-reported confidence
Mean parameter confidence
54%
Average confidence across PaperParameter rows surfaced above
review against source PDF before citing · scores 0–1
Chart explorer
Move the inputs this paper used and see how the predicted outcome shifts.
Explore model
The reactor in 3D, with flow you can switch on and off.
AI insights
Contradictions, gaps and opportunities found by comparing this paper with the corpus.
Compare similar papers
The nearest papers by system, materials and organisms, with their outcomes side by side.
No 3D model is mapped to this paper yet. The values extracted from it are listed under Extracted values.
In this record
Organisms, parameters and materials this paper reports. Each links to its page.
Organisms · 1
Keywords
- Laminar flow
- Flow (mathematics)
- Microbial fuel cell
- Layer (electronics)
- Fuel cells
- Photosynthesis
Cite
Do Yeon Hong, Yeon Woo Cha, Yoomin Ahn (2024). Flexible Single‐Layer Fabric‐Based Co‐Laminar Flow Photosynthetic Microbial Fuel Cell. Advanced Materials Technologies. https://doi.org/10.1002/admt.202401399