Paper · MFC
Binder-free SeNP-decorated cathodes and bioanodes for dual-chambered microbial fuel cells
Summary
What the paper reports, in its own words.
Abstract
Microbial fuel cells (MFCs) offer a promising dual-function solution for sustainable energy generation and wastewater treatment. However, improving their power output remains a significant challenge due to conventional conductive binders’ high cost and limited conductivity. This study introduces a novel approach by developing a binder-free selenium nanoparticle (SeNP)–decorated cathode and integrating a bioanode to enhance MFC performance. The cathode was prepared by simple dip-coating method. SeNPs were synthesized using ascorbic acid and the extracellular extract of lysinibacillus xylanilyticus, providing a cost-effective and eco-friendly cathode modification. Concurrently, Shewanella putrefaciens was immobilized on the anode to enrich electroactive biofilms and facilitate extracellular electron transfer. The MFC designed with a binder-free SeNP-decorated cathode (B-Se-G) and bioanode achieved a record-high power density of 7000 µW/m 2 , significantly superior to C-Se-G (4761 µW/m 2 ) and the bare graphite electrode. This improvement was attributed to enhanced electrochemical catalytic activity, higher extracellular electron transfer efficiency, increased chemical oxygen demand removal, and improved coulombic efficiency. Integrating an exoelectrogen-enriched bioanode and a binder-free selenium-decorated cathode represents a breakthrough in MFC technology, offering a scalable, cost-effective, and sustainable solution for simultaneous wastewater treatment and bioelectricity generation. These findings provide new insights into optimizing MFC architecture for enhanced performance and practical implementation.
AI summary: matches the abstract (70% confidence) · review against source PDF
Key findings
- Binder-free SeNP-decorated cathode improved MFC performance by 47% compared to conventional cathode.
- MFC with binder-free SeNP-decorated cathode and bioanode achieved a power density 47% higher than a MFC with a conventional cathode.
Extracted values
Every value pulled from the paper, with its source, so each number can be checked against the text.
n = 8 extracted values
Select a citation to see the quote, page and confidence behind a value.
0 of 7 extracted rows modelable
- 4 not canonicalised (no canonical slug)
- 3 no SI value
| Parameter | Value | Unit | Confidence | Source | Modelable |
|---|---|---|---|---|---|
| Substrate | wastewater | — | 80% | llm | |
| Reactor type | dual-chamber | — | 80% | extracted | Excluded: not canonicalised (no canonical slug) |
| Chambers | 2 | — | 80% | extracted | Excluded: not canonicalised (no canonical slug) |
| Electrode material | graphite | — | 50% | extracted | Excluded: not canonicalised (no canonical slug) |
| Microbial community | shewanella putrefaciens was immobilized on the anode to enrich electroactive biofilms and facilitate extracellular electron transfer. the mfc designed with a binder-free senp-decorated cathode (b-se-g) and bioanode achieved a record-high power density of 7000 µw/m<jats:sup>2</jats:sup> | — | 50% | extracted | Excluded: not canonicalised (no canonical slug) |
| Anode material | Shewanella putrefaciens immobilized on anode | — | 50% | extracted | Excluded: no SI value |
| Maximum power density | 7 | mW/m² | 50% | extracted | Excluded: no SI value |
| Cathode material | SeNP-decorated cathode (B-Se-G) | — | 50% | extracted | Excluded: no SI value |
Methodology
What was the system and how was it run
Methodology
Methodology
The cathode was prepared by simple dip-coating method, and SeNPs were synthesized using ascorbic acid and the extracellular extract of lysinibacillus xylanilyticus.
System configuration
| Field | Value |
|---|---|
| chamber configuration | dual |
| system type | MFC |
Electrode specifications
| Field | Value |
|---|---|
| materials | ["graphite"] |
Biological parameters
| Field | Value |
|---|---|
| microbial community | shewanella putrefaciens was immobilized on the anode to enrich electroactive biofilms and facilitate extracellular electron transfer. the mfc designed with a binder-free senp-decorated cathode (b-se-g) and bioanode achieved a record-high power density of 7000 µw/m<jats:sup>2</jats:sup> |
Performance metrics
| Field | Value |
|---|---|
| citation count | 1 |
Operational parameters
| Field | Value |
|---|---|
| substrate | ["wastewater"] |
Pipeline
Raw extractions, artifacts, quality signal
Extraction quality
honesty signalCalibrate your trust in the extracted content against these signals — they're how the pipeline rated its own output for this paper.
Parameter completeness
63%
Fraction of expected parameters extracted
Data completeness
60%
Overall extraction coverage across fields
AI confidence
70%
Model self-reported confidence
Mean parameter confidence
61%
Average confidence across PaperParameter rows surfaced above
review against source PDF before citing · scores 0–1
Chart explorer
Move the inputs this paper used and see how the predicted outcome shifts.
Explore model
The reactor in 3D, with flow you can switch on and off.
AI insights
Contradictions, gaps and opportunities found by comparing this paper with the corpus.
Compare similar papers
The nearest papers by system, materials and organisms, with their outcomes side by side.
Representative model, generic MFC
Tap to interactRepresentative model, generic MFC
Representative MFC — matched on the paper’s system type only, not its reactor or geometry.
In this record
Organisms, parameters and materials this paper reports. Each links to its page.
Organisms · 1
Keywords
- Microbial fuel cell
- Cathode
- Dual (grammatical number)
- Fuel cells
- Dual role
- Nanotechnology
Cite
Jayanthi Velayudhan, Sangeetha Subramanian (2025). Binder-free SeNP-decorated cathodes and bioanodes for dual-chambered microbial fuel cells. Emerging Materials Research. https://doi.org/10.1680/jemmr.24.00195
- Journal
- Emerging Materials Research
Open in lab for full controls, parameter editing, and template overlays.
Open in lab