Paper
Unraveling the Electron Transfer in Cupriavidus necator – Insights Into Mediator Reduction Mechanics
- C. necator
- Cupriavidus necator
Summary
What the paper reports, in its own words.
Abstract
Abstract Cupriavidus necator , despite lacking direct electron transfer capabilities, demonstrates efficient reduction of various redox mediators in oxygen‐free cultivation within bioelectrochemical systems. This study investigates the reduction site of ferricyanide through inhibition and expression rate analysis of oxygen and nitrate respiration chain complexes, comparing aerobic cultivation conditions with fructose as carbon and electron donor to autotrophic (CO 2 /H 2 /O 2 ) and anodic cultivation conditions (fructose/anode). Azide inhibition identified cytochrome c oxidase as the primary complex facilitating electron transfer to ferricyanide, with a secondary role proposed for nitrite reductase NirS, demonstrating a 3.9±1.1‐fold higher expression when exposed to anodic conditions. The 2.9±0.6‐fold increase in the expression of the natural porin OmpA under anodic conditions implies its potential involvement in ferricyanide uptake. Additionally, chemically permeabilizing cell membranes with cetyltrimethylammonium bromide doubles ferricyanide reduction rates without an anode present, offering insights for optimizing redox mediation in C. necator based bioelectrochemical systems. This study opens up new possibilities for the targeted optimization of mediated electron transfer in C. necator and other organisms.
AI summary
78% confidenceKey insights
Mechanism Cytochrome c oxidase (cbb3) is the primary ferricyanide reduction site; azide inhibition caused immediate current collapse, whereas myxothiazol (Q0 site inhibitor) had no effect at 6.8 μM.
So what. Operators should target cbb3-type cytochrome oxidase enhancement or stabilization to improve MET efficiency; Q-cycle inhibition does not block ferricyanide reduction, suggesting the Q0 site is not the primary interaction point.
Mechanism Nitrite reductase NirS expression increases 3.9±1.1-fold under BES conditions versus 2.2±0.1-fold under autotrophic conditions, indicating anodic conditions specifically upregulate this secondary reduction site.
So what. NirS upregulation under anodic stress may provide redundancy in ferricyanide reduction; monitor NirS expression as a biomarker for MET capacity under electrode-dependent growth.
Mechanism OmpA outer membrane porin expression increases 2.9±0.6-fold under anaerobic conditions (BES and autotrophic) but not in the ΔpHG1 strain under BES, despite OmpA being chromosomally encoded, suggesting plasmid-dependent regulation of membrane permeability.
So what. Maintain pHG1 plasmid integrity to preserve OmpA upregulation and ferricyanide uptake capacity; loss of the megaplasmid decouples anaerobic sensing from outer membrane protein expression.
Trade-off Chemical membrane permeabilization with cetyltrimethylammonium bromide doubles ferricyanide reduction rates without an anode, indicating membrane transport is a rate-limiting bottleneck independent of electrode potential.
So what. Membrane permeability is a critical design target; consider surfactant-based or genetic approaches to increase outer membrane porosity or mediator uptake to overcome the 2-fold reduction rate ceiling observed in wild-type cultures.
Mechanism ΔpHG1 strain lacking hydrogenases and most nitrate reductases still achieves 161±14 μA/cm² current density (vs. 183±5 μA/cm² in PHB⁻), ruling out hydrogenases and periplasmic/membrane-bound nitrate reductases as essential for ferricyanide reduction.
So what. Ferricyanide reduction does not require H₂ oxidation or periplasmic nitrate reductase; focus optimization on chromosomal cbb3 and NirS rather than plasmid-encoded pathways.
Opportunity areas6
Specific gaps in this paper, with an experiment that would close each.
High No systematic variation of anode potential (only 500 mV vs. Ag/AgCl tested) to determine the operating window for cbb3-mediated ferricyanide reduction and identify potential trade-offs between current density and NirS upregulation.
The paper identifies cbb3 and NirS as the two reduction sites with different redox potentials (cbb3 in cytochrome c oxidase pathway vs. NirS at NO₂/NO E° = 375 mV), but tests only one electrode potential. Varying potential could reveal which site dominates at different voltages and optimize for either power or selectivity.
Try. Test anode potentials from 200 to 700 mV vs. Ag/AgCl; measure current density, ferricyanide reduction rate, NirS/cbb3 expression ratio, and any N-oxide accumulation (NO, N₂O) as a function of potential.
High No measurement of dissolved oxygen, pH, or ionic strength effects on ferricyanide reduction rate or mediator uptake, despite OmpA and other porins being pH- and osmolarity-sensitive.
OmpA expression increases 2.9-fold under anaerobic conditions, but the paper does not test whether residual O₂, pH drift, or salt concentration affect mediator transport or cbb3 activity. Membrane permeability is identified as a bottleneck, but environmental factors are not explored.
Try. Vary pH (6.0–8.0), dissolved O₂ (0–100% saturation), and NaCl (0–500 mM) in BES; measure current density, OmpA expression, and ferricyanide reduction rate to identify optimal conditions for membrane permeability and electron transfer.
Medium No investigation of ferricyanide concentration dependence or saturation kinetics; only 5 mM tested, which may not reflect the Km or Vmax of cbb3 or NirS for this mediator.
The paper shows that ferricyanide reduction rate peaks at 0.22 mM/h in the first 6 h and then declines, but does not test whether this is due to mediator depletion, enzyme saturation, or metabolic limitation. Kinetic parameters would inform mediator dosing and reactor design.
Try. Vary ferricyanide concentration from 0.5 to 20 mM; measure initial reduction rate, steady-state current density, and expression of cbb3 and NirS to determine Km and Vmax for each enzyme.
Medium No direct measurement of membrane permeability or mediator uptake rate in wild-type vs. chemically permeabilized cells; only bulk ferricyanide reduction rate is reported.
Chemical permeabilization doubles the reduction rate, but the paper does not quantify the increase in mediator diffusion across the outer membrane or the contribution of each membrane layer (outer, periplasm, inner). This limits mechanistic understanding and genetic engineering targets.
Try. Use fluorescently labeled ferricyanide or radiolabeled mediator to measure uptake kinetics in wild-type, ΔompA, and chemically permeabilized cells; correlate with OmpA expression and current density.
Medium No testing of alternative mediators with different redox potentials, charge, or lipophilicity to determine whether cbb3 and NirS selectivity is mediator-specific or a general property of these enzymes.
The paper focuses exclusively on ferricyanide (E° = 416 mV, hydrophilic, anionic). The authors mention that other mediators (neutral red, poly(2-methacryloyloxyethyl phosphorylcholine-co-vinylferrocene)) have been used in prior work, but do not compare interaction sites or kinetics across mediators.
Try. Test ferricyanide, neutral red, DCIP, and phenazine methosulfate in parallel BES experiments; measure current density, mediator reduction rate, and cbb3/NirS expression to identify mediator-specific vs. enzyme-specific effects.
Low No long-term stability or repeated cycling data; cultivation is limited to 192–216 h with declining current, but no recovery or re-activation experiments are performed.
Current density peaks at 6 h and then declines despite available ferricyanide and anode potential. The paper does not test whether this is reversible (e.g., by refreshing medium or adjusting potential) or permanent (e.g., due to cell death or electrode fouling).
Try. Extend BES cultivation to 500+ h with periodic medium exchange or potential cycling; measure current recovery, cell viability, and electrode surface analysis to distinguish metabolic limitation from physical fouling.
Generated by MESSAI extraction pipeline · review against source PDF
Extracted values
Every value pulled from the paper, with its source, so each number can be checked against the text.
n = 21 extracted values
Select a citation to see the quote, page and confidence behind a value.
4 of 21 extracted rows modelable
- 17 not canonicalised (no canonical slug)
| Parameter | Value | Unit | Confidence | Source | Notes | Modelable |
|---|---|---|---|---|---|---|
| Total charge transferred | 1,690 | C | 90% | extracted | "a total charge of 1686±101 C was transferred within 192 h" · T=30°C, pH(an)=6.8, substrate=fructose | Excluded: not canonicalised (no canonical slug) |
| Current density change upon antimycin A inhibition | 20 | μg/mL | 90% | extracted | "The inhibition of cytochrome c reductase with antimycin A affects the current re…" · T=30°C, pH(an)=6.8, substrate=fructose | Excluded: not canonicalised (no canonical slug) |
| Current density before azide inhibition | 170 | μA/cm² | 90% | extracted | "the current response, which indicates reductase activity, decreased from 170 μAc…" · T=30°C, pH(an)=6.8, substrate=fructose | Excluded: not canonicalised (no canonical slug) |
| Current density after azide inhibition | 24 | μA/cm² | 90% | extracted | "decreased from 170 μAcm−2 to 24 μAcm−2 (and continued to decline slightly) withi…" · T=30°C, pH(an)=6.8, substrate=fructose | Excluded: not canonicalised (no canonical slug) |
| Current density decline upon ZnSO4 inhibition | 40 | μA/cm² | 90% | extracted | "resulted in an instant decline in current by 40 μAcm−2" · T=30°C, pH(an)=6.8, substrate=fructose | Excluded: not canonicalised (no canonical slug) |
| Current density decline upon rotenone inhibition | 50 | μA/cm² | 90% | extracted | "After adding the inhibitor, the current density drops by 50 μAcm−2" · T=30°C, pH(an)=6.8, substrate=fructose | Excluded: not canonicalised (no canonical slug) |
| Specific current density with CTAB at 24 h | 1,100 | μA/g CDW/cm² | 90% | extracted | "In the first 24 h, CTAB treated cells reach minimal higher maximal current densi…" · T=30°C, pH(an)=6.8, substrate=fructose | Excluded: not canonicalised (no canonical slug) |
| Specific current density without CTAB at 24 h | 974 | μA/g CDW/cm² | 90% | extracted | "In the first 24 h, CTAB treated cells reach minimal higher maximal current densi…" · T=30°C, pH(an)=6.8, substrate=fructose | Excluded: not canonicalised (no canonical slug) |
| Current Density (Basis Unresolved) | 1,840 | μA/cm² | 90% | extracted | "C. necator PHB− reached a maximum current density of 1835 μAcm−2" · T=30°C, pH(an)=6.8, substrate=fructose | Modelable |
| Coulombic efficiency | 63.1 | % | 90% | extracted | "The electrons originating from fructose are transferred through ferricyanide to …" · T=30°C, pH(an)=6.8, substrate=fructose | Modelable |
| Current Density (Basis Unresolved) | 161 | μA/cm² | 90% | extracted | "the current density for the ΔpHG1 strain reaches a slightly lower maximum of 161…" · T=30°C, pH(an)=6.8, substrate=fructose | Modelable |
| Coulombic efficiency | 68.2 | % | 90% | extracted | "a similar coulombic efficiency of 68.2±9%" · T=30°C, pH(an)=6.8, substrate=fructose | Modelable |
| ΔOD600 at 0 h | 1.2 | — | 90% | extracted | "the ΔOD600 rises slightly from 1.2 (0 h) to 1.7 after 6 h" · T=30°C, pH(an)=6.8, substrate=fructose | Excluded: not canonicalised (no canonical slug) |
| ΔOD600 at 6 h | 1.7 | — | 90% | extracted | "the ΔOD600 rises slightly from 1.2 (0 h) to 1.7 after 6 h" · T=30°C, pH(an)=6.8, substrate=fructose | Excluded: not canonicalised (no canonical slug) |
| Fructose consumption | 0.3 | g/L | 90% | extracted | "The total fructose consumption is only 0.3±0.02 gL−1" · T=30°C, pH(an)=6.8, substrate=fructose | Excluded: not canonicalised (no canonical slug) |
| Maximum mediator reduction rate | 0.22 | mM/h | 90% | extracted | "The maximum mediator reduction rate in this phase reached 0.22 mMh−1" · T=30°C, pH(an)=6.8, substrate=fructose | Excluded: not canonicalised (no canonical slug) |
| Maximum mediator reduction rate | 0.19 | mM/h | 90% | extracted | "Ferricyanide (red squares) is reduced at the highest rate (0.19 mM h−1) during t…" · T=30°C, pH(an)=6.8, substrate=fructose | Excluded: not canonicalised (no canonical slug) |
| Fructose consumption | 0.27 | g/L | 90% | extracted | "with the ΔpHG1 strain consuming 0.27±0.02 gL−1 of fructose during 216 h of culti…" · T=30°C, pH(an)=6.8, substrate=fructose | Excluded: not canonicalised (no canonical slug) |
| Remaining current as percentage | 14 | % | 90% | extracted | "representing approximately 14% of the initial current remaining" · T=30°C, pH(an)=6.8, substrate=fructose | Excluded: not canonicalised (no canonical slug) |
| Ferricyanide reduction rate | 27 | μM/h | 90% | extracted | "CTAB treated cells with identical ΔOD600 values reduce ferricyanide 2-fold faste…" · T=30°C, substrate=fructose | Excluded: not canonicalised (no canonical slug) |
| Ferricyanide reduction rate with CTAB | 53 | μM/h | 90% | extracted | "CTAB treated cells with identical ΔOD600 values reduce ferricyanide 2-fold faste…" · T=30°C, substrate=fructose | Excluded: not canonicalised (no canonical slug) |
Methodology
What was the system and how was it run
Methodology
Methodology
The study used bioelectrochemical reactor (BES) cultivation of C. necator PHB⁻ and ΔpHG1 strains with ferricyanide as a redox mediator at 500 mV vs. Ag/AgCl (satd. KCl). Ferricyanide reduction sites were identified via: (1) qPCR analysis of gene expression under aerobic, autotrophic (H₂/CO₂/O₂), and anodic (fructose/anode) conditions; (2) site-specific inhibition with azide, antimycin A, myxothiazol, rotenone, ZnSO₄, and malonate; (3) comparison of wild-type and pHG1-deficient strains to eliminate plasmid-encoded genes; and (4) chemical membrane permeabilization with cetyltrimethylammonium bromide to test transport limitations. Current density, ferricyanide concentration, cell density (OD₆₀₀), and fructose consumption were monitored over 192–216 h.
System configuration
| Field | Value |
|---|---|
| reactor type | BES |
| chamber config | 1-chamber |
Operating conditions
2 runs extracted| Run | T°C | pHan | pHcat | Substrate | [S]mg/L | HRTh | Mode | R_extΩ | V_appV | Inoculum |
|---|---|---|---|---|---|---|---|---|---|---|
| v2-d7708f3f4642c312 | 30 | 6.8 | — | fructose | — | — | — | — | — | — |
| v2-d9c8385c209a07f6 | 30 | — | — | fructose | — | — | — | — | — | — |
Pipeline
Raw extractions, artifacts, quality signal
Extraction quality
honesty signalCalibrate your trust in the extracted content against these signals — they're how the pipeline rated its own output for this paper.
AI confidence
78%
Model self-reported confidence
Mean parameter confidence
90%
Average confidence across PaperParameter rows surfaced above
review against source PDF before citing · scores 0–1
Chart explorer
Move the inputs this paper used and see how the predicted outcome shifts.
Explore model
The reactor in 3D, with flow you can switch on and off.
AI insights
Contradictions, gaps and opportunities found by comparing this paper with the corpus.
Compare similar papers
The nearest papers by system, materials and organisms, with their outcomes side by side.
Source PDF
The paper as published.
No 3D model is mapped to this paper yet. The values extracted from it are listed under Extracted values.
In this record
Organisms, parameters and materials this paper reports. Each links to its page.
Organisms · 2
- C. necator
- Cupriavidus necator
Keywords
- Cupriavidus necator
- Mediator
- Reduction (mathematics)
- Electron transfer
Cite
André Gemünde, Nils‐Lennart Ruppert, Dirk Holtmann (2024). Unraveling the Electron Transfer in Cupriavidus necator – Insights Into Mediator Reduction Mechanics. ChemElectroChem. https://doi.org/10.1002/celc.202400273
- Journal
- ChemElectroChem