Research

Paper

Mixed-Kolbe Electrolysis Using Solid-Supported Bases

01

Summary

What the paper reports, in its own words.

Not BESElectrosynthesisBiomass Valorization

Abstract

We have successfully developed a novel mixed-Kolbe electrolysis system using solid-supported bases. Mixed-Kolbe electrolysis of carboxylic acids using solid-supported bases was carried out to provide the corresponding mixed-Kolbe products in moderate to good yields. In this system, solid-supported bases were recyclable even under high current density.

02

Extracted values

Every value pulled from the paper, with its source, so each number can be checked against the text.

n = 22 extracted values

Select a citation to see the quote, page and confidence behind a value.

0 of 22 extracted rows modelable

  • 22 not a microbial electrochemical system paper
ParameterValueUnitConfidenceSourceNotesModelable
Voltage47.5Outside physical range, check sourceVnot reported
extracted
"The cell voltage in entry 1 was 45-50 V" · substrate=sebacic acid monomethyl ester + acetic acid, MeOH, silica gel-supported piperidineExcluded: not a microbial electrochemical system paper
Current Density (Basis Unresolved)×6100mA/cm²not reported
extracted
"Constant current electrolysis (100 mA cm −2) was applied" · substrate=sebacic acid monomethyl ester + acetic acid, MeOH, silica gel-supported piperidineExcluded: not a microbial electrochemical system paper
Yield, Kolbe dimer product, 2nd run47%not reported
extracted
"The yield of 3 was always ca. 50 % [52 % (1st), 47 % (2nd), 52 % (3rd)]" · substrate=sebacic acid monomethyl ester + acetic acid, MeOH/MeCN (50/50 v/v), silica gel-supported pyridineExcluded: not a microbial electrochemical system paper
Substrate concentration, acetic acid×20.6Mnot reported
extracted
"acetic acid (2, 0.6 M)" · substrate=sebacic acid monomethyl ester + acetic acid, MeOH/MeCN (50/50 v/v), silica gel-supported pyridineExcluded: not a microbial electrochemical system paper
Yield, Kolbe dimer product45%not reported
extracted
"the yield of 3 was increased to 45% and 1 was completely consumed in MeOH/MeCN (…" · substrate=sebacic acid monomethyl ester + acetic acid, MeOH/MeCN (50/50 v/v), silica gel-supported pyridineExcluded: not a microbial electrochemical system paper
Anode material and geometric anode area×68cm²not reported
extracted
"platinum plate electrodes (2×2 cm2)" · substrate=propionic acid, MeOH/MeCN (50/50 v/v), silica gel-supported pyridineExcluded: not a microbial electrochemical system paper
Yield, Kolbe dimer product, 3rd run52%not reported
extracted
"The yield of 3 was always ca. 50 % [52 % (1st), 47 % (2nd), 52 % (3rd)]" · substrate=sebacic acid monomethyl ester + acetic acid, MeOH/MeCN (50/50 v/v), silica gel-supported pyridineExcluded: not a microbial electrochemical system paper
Yield, Kolbe dimer product30%not reported
extracted
"Mixed-Kolbe electrolysis of 1 and 2 in 0.1 M silica gel-supported piperidine/MeO…" · substrate=sebacic acid monomethyl ester + acetic acid, MeOH, silica gel-supported piperidineExcluded: not a microbial electrochemical system paper
Substrate concentration, sebacic acid monomethyl ester×20.1Mnot reported
extracted
"sebacic acid monomethyl ester (1, 0.1 M)" · substrate=sebacic acid monomethyl ester + acetic acid, MeOH, silica gel-supported piperidineExcluded: not a microbial electrochemical system paper
Yield, Kolbe dimer product, 1st run52%not reported
extracted
"The yield of 3 was always ca. 50 % [52 % (1st), 47 % (2nd), 52 % (3rd)]" · substrate=sebacic acid monomethyl ester + acetic acid, MeOH/MeCN (50/50 v/v), silica gel-supported pyridineExcluded: not a microbial electrochemical system paper

Methodology

What was the system and how was it run

Operating conditions

5 runs extracted
RunT°CpHanpHcatSubstrate[S]mg/LHRThModeR_extΩV_appVInoculum
v2-015e19a49e1e2ae3———sebacic acid monomethyl ester + acetic acid, MeOH/MeCN (50/50 v/v), silica gel-supported pyridine——————
v2-127aabcc3c7de986———propionic acid, MeOH/MeCN (50/50 v/v), silica gel-supported pyridine——————
v2-19c43d1893810bac———sebacic acid monomethyl ester + acetic acid, MeOH, silica gel-supported piperidine——————
v2-887d989c76bbb714———butyric acid, MeOH/MeCN (50/50 v/v), silica gel-supported pyridine——————
v2-b6f832dca5c39de5———valeric acid, MeOH/MeCN (50/50 v/v), silica gel-supported pyridine——————

Pipeline

Raw extractions, artifacts, quality signal

Extracted via MESSAI Nougat + LLM pipeline · review against source PDF before citing

03

Chart explorer

Move the inputs this paper used and see how the predicted outcome shifts.

04

Explore model

The reactor in 3D, with flow you can switch on and off.

05

AI insights

Contradictions, gaps and opportunities found by comparing this paper with the corpus.

06

Compare similar papers

The nearest papers by system, materials and organisms, with their outcomes side by side.

07

Source PDF

The paper as published.

No 3D model is mapped to this paper yet. The values extracted from it are listed under Extracted values.

1000amperes per square metre
Best result · Current density
best of 6
22
Extracted values
2006
Year

Keywords

  • carboxylic acids
  • high current density
  • heterogeneous catalysis
  • alkyl iodides

Cite

Hitoshi KURIHARA, Toshiki TAJIMA, Toshio FUCHIGAMI (2006). Mixed-Kolbe Electrolysis Using Solid-Supported Bases. Electrochemistry. https://doi.org/10.5796/electrochemistry.74.615