Paper · MES
Selective Enrichment Establishes a Stable Performing Community for Microbial Electrosynthesis of Acetate from CO₂
Summary
What the paper reports, in its own words.
Abstract
The advent of renewable energy conversion systems exacerbates the existing issue of intermittent excess power. Microbial electrosynthesis can use this power to capture CO2 and produce multicarbon compounds as a form of energy storage. As catalysts, microbial populations can be used, provided side reactions such as methanogenesis are avoided. Here a simple but effective approach is presented based on enrichment of a robust microbial community via several culture transfers with H2:CO2 conditions. This culture produced acetate at a concentration of 1.29 ± 0.15 g L⁻¹ (maximum up to 1.5 g L⁻¹; 25 mM) from CO2 at a fixed current of -5 Am⁻² in fed-batch bioelectrochemical reactors at high N2:CO2 flow rates. Continuous supply of reducing equivalents enabled acetate production at a rate of 19 ± 2 gm⁻²d⁻¹ (projected cathode area) in several independent experiments. This is a considerably high rate compared with other unmodified carbon-based cathodes. 58 ± 5% of the electrons was recovered in acetate, whereas 30 ± 10% of the electrons was recovered in H2 as a secondary product. The bioproduction was most likely H2 based; however, electrochemical, confocal microscopy, and community analyses of the cathodes suggested the possible involvement of the cathodic biofilm. Together, the enrichment approach and galvanostatic operation enabled instant start-up of the electrosynthesis process and reproducible acetate production profiles.
Extracted values
Every value pulled from the paper, with its source, so each number can be checked against the text.
n = 19 extracted values
Select a citation to see the quote, page and confidence behind a value.
9 of 19 extracted rows modelable
- 4 not canonicalised (no canonical slug)
- 6 no SI value
| Parameter | Value | Unit | Confidence | Source | Notes | Modelable |
|---|---|---|---|---|---|---|
| Acetate Production Rate | 22 | g m⁻² d⁻¹ | 90% | extracted | "Figure S-9. Acetate production rates achieved with reactors R1 to R6. R2 shows a…" · T=30°C, pH(an)=7.5, substrate=CO2 | Excluded: no SI value |
| Acetate Production Rate | 18 | g m⁻² d⁻¹ | 90% | extracted | "Figure S-9. Acetate production rates achieved with reactors R1 to R6. R3 shows a…" · T=30°C, pH(an)=7.69, substrate=CO2 | Excluded: no SI value |
| Acetate Production Rate | 12 | g m⁻² d⁻¹ | 90% | extracted | "Figure S-9. Acetate production rates achieved with reactors R1 to R6. R5 shows a…" · T=30°C, pH(an)=8, substrate=CO2 | Excluded: no SI value |
| Acetate Production Rate | 14 | g m⁻² d⁻¹ | 90% | extracted | "Figure S-9. Acetate production rates achieved with reactors R1 to R6. R6 shows a…" · T=30°C, pH(an)=8, substrate=CO2 | Excluded: no SI value |
| Electron recovery in acetate | 60 | % | 90% | extracted | "Figure S-7. Influence of gas flow rates on the electron recoveries in acetate an…" · T=30°C, pH(an)=7.57, substrate=CO2 | Excluded: not canonicalised (no canonical slug) |
| Electron recovery in H₂ | 20 | % | 90% | extracted | "Figure S-7. Influence of gas flow rates on the electron recoveries in acetate an…" · T=30°C, pH(an)=7.57, substrate=CO2 | Excluded: not canonicalised (no canonical slug) |
| Electron recovery in acetate | 65 | % | 90% | extracted | "Figure S-7. Influence of gas flow rates on the electron recoveries in acetate an…" · T=30°C, pH(an)=7.5, substrate=CO2 | Excluded: not canonicalised (no canonical slug) |
| Electron recovery in H₂ | 15 | % | 90% | extracted | "Figure S-7. Influence of gas flow rates on the electron recoveries in acetate an…" · T=30°C, pH(an)=7.5, substrate=CO2 | Excluded: not canonicalised (no canonical slug) |
| Acetate Production Rate | 20 | g m⁻² d⁻¹ | 90% | extracted | "Figure S-9. Acetate production rates achieved with reactors R1 to R6. R1 shows a…" · T=30°C, pH(an)=7.57, substrate=CO2 | Excluded: no SI value |
| Acetate Production Rate | 16 | g m⁻² d⁻¹ | 90% | extracted | "Figure S-9. Acetate production rates achieved with reactors R1 to R6. R4 shows a…" · T=30°C, pH(an)=7.69, substrate=CO2 | Excluded: no SI value |
| Acetic Acid Concentration | 50 | mg/L | 90% | extracted | "Figure S-6. Microbial electrosynthesis with reactor R2 with a prolonged batch cy…" · T=30°C, pH(an)=7.5, substrate=CO2 | Modelable |
| Acetic Acid Concentration | 1,200 | mg/L | 90% | extracted | "Figure S-4. Production of volatile fatty acids (VFAs) in reactors R1 and R2 oper…" · T=30°C, pH(an)=7.57, substrate=CO2 | Modelable |
| Acetic Acid Concentration | 1,500 | mg/L | 90% | extracted | "Figure S-8. Acetate production and bicarbonate concentration profiles for reacto…" · T=30°C, pH(an)=8, substrate=CO2 | Modelable |
| Acetic Acid Concentration | 1,800 | mg/L | 90% | extracted | "Figure S-8. Acetate production and bicarbonate concentration profiles for reacto…" · T=30°C, pH(an)=8, substrate=CO2 | Modelable |
| Acetic Acid Concentration | 1,850 | mg/L | 90% | extracted | "Table S-3. VFAs produced by the representative enriched mixed microbial culture …" · T=30°C, substrate=CO2:H2 | Modelable |
| Acetic Acid Concentration | 587 | mg/L | 90% | extracted | "Table S-3. VFAs produced by the representative enriched mixed microbial culture …" · T=30°C, substrate=CO2:H2 | Modelable |
| Propionic Acid Concentration | 160 | mg/L | 90% | extracted | "Table S-3. VFAs produced by the representative enriched mixed microbial culture …" · T=30°C, substrate=CO2:H2 | Modelable |
| Butyrate Concentration | 743 | mg/L | 90% | extracted | "Table S-3. VFAs produced by the representative enriched mixed microbial culture …" · T=30°C, substrate=CO2:H2 | Modelable |
| Acetic Acid Concentration | 1,500 | mg/L | 90% | extracted | "Figure S-4. Production of volatile fatty acids (VFAs) in reactors R1 and R2 oper…" · T=30°C, pH(an)=7.5, substrate=CO2 | Modelable |
Methodology
What was the system and how was it run
Operating conditions
5 runs extracted| Run | T°C | pHan | pHcat | Substrate | [S]mg/L | HRTh | Mode | R_extΩ | V_appV | Inoculum |
|---|---|---|---|---|---|---|---|---|---|---|
| v2-14cd5c7185aa5deb | 30 | 8 | — | CO2 | — | — | — | — | — | — |
| v2-519d04a8ad8253ab | 30 | 7.5 | — | CO2 | — | — | — | — | — | — |
| v2-88d525f9c8cb04f8 | 30 | 7.69 | — | CO2 | — | — | — | — | — | — |
| v2-a461a0b50172e023 | 30 | 7.57 | — | CO2 | — | — | — | — | — | — |
| v2-c86a98801ccaedb5 | 30 | — | — | CO2:H2 | — | — | — | — | — | — |
Pipeline
Raw extractions, artifacts, quality signal
Extraction quality
honesty signalCalibrate your trust in the extracted content against these signals — they're how the pipeline rated its own output for this paper.
Mean parameter confidence
90%
Average confidence across PaperParameter rows surfaced above
review against source PDF before citing · scores 0–1
Chart explorer
Move the inputs this paper used and see how the predicted outcome shifts.
Explore model
The reactor in 3D, with flow you can switch on and off.
AI insights
Contradictions, gaps and opportunities found by comparing this paper with the corpus.
Compare similar papers
The nearest papers by system, materials and organisms, with their outcomes side by side.
Source PDF
The paper as published.
Representative model, generic microbial electrochemical system
Tap to interactRepresentative model, generic microbial electrochemical system
Representative microbial electrochemical system — matched on the paper’s system type only, not its reactor or geometry.
Keywords
- Electrosynthesis
- Chemistry
- Microbial population biology
- Environmental chemistry
- Bacteria
- Biology
- Electrode
- Electrochemistry
Cite
Sunil A. Patil, Jan Arends, Inka Vanwonterghem et al. (2015). Selective Enrichment Establishes a Stable Performing Community for Microbial Electrosynthesis of Acetate from CO₂. Environmental Science & Technology. https://doi.org/10.1021/es506149d
Open in lab for full controls, parameter editing, and template overlays.
Open in lab