Paper · MES
Enhanced selectivity to butyrate and caproate above acetate in continuous bioelectrochemical chain elongation from CO2: Steering with CO2 loading rate and hydraulic retention time
Summary
What the paper reports, in its own words.
Abstract
The selective and high-rate microbial electrosynthesis of a valuable molecule is favoured from an economic perspective. We demonstrate here that increasing selectivity towards n-butyrate and n-caproate over acetate, while maintaining high production rate and electron recovery, is achievable by adjusting the CO2 feeding strategy and hydraulic retention time. We show that high CO2 loading rate (173 L d⁻¹) and long hydraulic retention time (14 days) triggers bioelectrochemical chain elongation to n-butyrate and n-caproate (53.6 ± 4.1%C), whereas lower CO2 loading rate (8.6 L d⁻¹) does not, even with increasing HRT (96.4 ± 2.4%C into acetate). Moreover, temporarily detaching and re-attaching the biofilm allowed to obtain high-rate n-caproate production of 2.0 ± 0.1 g L⁻¹ d⁻¹ (max 3.1 g L⁻¹), while producing 3.3 ± 0.2 g L⁻¹ d⁻¹ n-butyrate (max 9.3 g L⁻¹), at an increased 63.6 ± 5.0%C into both. This was achieved with 69.8 ± 2.8% total electron recovery at −100.8 A m⁻².
Extracted values
Every value pulled from the paper, with its source, so each number can be checked against the text.
No PDF on file yet
MESSAI holds the bibliographic record for this paper but not its PDF, so there is no text to extract values from.
Chart explorer
Move the inputs this paper used and see how the predicted outcome shifts.
Explore model
The reactor in 3D, with flow you can switch on and off.
AI insights
Contradictions, gaps and opportunities found by comparing this paper with the corpus.
Compare similar papers
The nearest papers by system, materials and organisms, with their outcomes side by side.
Representative model, generic microbial electrochemical system
Tap to interactRepresentative model, generic microbial electrochemical system
Representative microbial electrochemical system — matched on the paper’s system type only, not its reactor or geometry.
Keywords
- Butyrate
- Hydraulic retention time
- Elongation
- Selectivity
- Chemistry
- Production rate
- Nuclear chemistry
- Food science
- Fermentation
- Biochemistry
- Wastewater
- Materials science
- Environmental engineering
- Metallurgy
- Catalysis
Cite
Ludovic Jourdin, Marijn Winkelhorst, Brian Rawls et al. (2019). Enhanced selectivity to butyrate and caproate above acetate in continuous bioelectrochemical chain elongation from CO2: Steering with CO2 loading rate and hydraulic retention time. Bioresource Technology Reports. https://doi.org/10.1016/j.biteb.2019.100284
Open in lab for full controls, parameter editing, and template overlays.
Open in lab