Research

Paper · MES

Simplifying microbial electrosynthesis reactor design

01

Summary

What the paper reports, in its own words.

3D Interactive ModelElectrosynthesis

Abstract

Microbial electrosynthesis, an artificial form of photosynthesis, can efficiently convert carbon dioxide into organic commodities; however, this process has only previously been demonstrated in reactors that have features likely to be a barrier to scale-up. Therefore, the possibility of simplifying reactor design by both eliminating potentiostatic control of the cathode and removing the membrane separating the anode and cathode was investigated with biofilms of Sporomusa ovata. S. ovata reduces carbon dioxide to acetate and acts as the microbial catalyst for plain graphite stick cathodes as the electron donor. In traditional 'H-cell' reactors, where the anode and cathode chambers were separated with a proton-selective membrane, the rates and columbic efficiencies of microbial electrosynthesis remained high when electron delivery at the cathode was powered with a direct current power source rather than with a potentiostat-poised cathode utilized in previous studies. A membrane-less reactor with a direct-current power source with the cathode and anode positioned to avoid oxygen exposure at the cathode, retained high rates of acetate production as well as high columbic and energetic efficiencies. The finding that microbial electrosynthesis is feasible without a membrane separating the anode from the cathode, coupled with a direct current power source supplying the energy for electron delivery, is expected to greatly simplify future reactor design and lower construction costs.

02

Extracted values

Every value pulled from the paper, with its source, so each number can be checked against the text.

n = 55 extracted values

Select a citation to see the quote, page and confidence behind a value.

19 of 55 extracted rows modelable

  • 10 not canonicalised (no canonical slug)
  • 25 no SI value
  • 1 outside physical bounds
ParameterValueUnitConfidenceSourceNotesModelable
Coulombic efficiency105Outside physical range, check source%90%
extracted
"Table 2 shows CE(%) of 105 ± 5% for Membrane-less at 1.9 V" · T=25°C, substrate=CO2Excluded: outside physical bounds
Power Density (Basis Unresolved)3.9mW90%
extracted
"Table 2 shows Power (mW) of 3.9 ± 0.6 for Membrane-less at 1.9 V" · T=25°C, substrate=CO2Excluded: no SI value
Power Density (Basis Unresolved)14.4mW90%
extracted
"Table 2 shows Power (mW) of 14.4 ± 0.7 for Membrane-less at 2.5 V" · T=25°C, substrate=CO2Excluded: no SI value
Power Density (Basis Unresolved)19.8mW90%
extracted
"Table 2 shows Power (mW) of 19.8 ± 1.8 for H-cell (2) at 3.5 V" · T=25°C, substrate=CO2Excluded: no SI value
Power Density (Basis Unresolved)55.2mW90%
extracted
"Table 2 shows Power (mW) of 55.2 ± 6.2 for H-cell (3) at 5.0 V" · T=25°C, substrate=CO2Excluded: no SI value
Power Density (Basis Unresolved)15.1mW90%
extracted
"Table 2 shows Power (mW) of 15.1 ± 3.3 for Abiotic H-cell at 3.5 V" · T=25°C, substrate=CO2Excluded: no SI value
Power Density (Basis Unresolved)13.8mW90%
extracted
"Table 2 shows Power (mW) of 13.8 ± 1.1 for H-cell (1) at 3.0 V" · T=25°C, substrate=CO2Excluded: no SI value
Power Density (Basis Unresolved)6.9mW90%
extracted
"Table 2 shows Power (mW) of 6.9 ± 1.9 for Membrane-less at 2.2 V" · T=25°C, substrate=CO2Excluded: no SI value
Coulombic efficiency89%90%
extracted
"Table 2 shows CE(%) of 89 ± 12% for H-cell (3) at 5.0 V" · T=25°C, substrate=CO2Modelable
Current Density (Basis Unresolved)0.77A/m²90%
extracted
"Table 2 shows Current density (A/m2) of 0.77 ± 0.05 for Abiotic H-cell at 3.5 V" · T=25°C, substrate=CO2Modelable
Coulombic efficiency79%90%
extracted
"Table 2 shows CE(%) of 79 ± 6% for Membrane-less at 2.2 V" · T=25°C, substrate=CO2Modelable
Coulombic efficiency82%90%
extracted
"Table 2 shows CE(%) of 82 ± 19% for H-cell (1) at 3.0 V" · T=25°C, substrate=CO2Modelable
Current Density (Basis Unresolved)0.87A/m²90%
extracted
"Table 2 shows Current density (A/m2) of 0.87 ± 0.08 for H-cell (2) at 3.5 V" · T=25°C, substrate=CO2Modelable
Coulombic efficiency83%90%
extracted
"Table 2 shows CE(%) of 83 ± 11% for H-cell (2) at 3.5 V" · T=25°C, substrate=CO2Modelable
Current Density (Basis Unresolved)1.7A/m²90%
extracted
"Table 2 shows Current density (A/m2) of 1.70 ± 0.19 for H-cell (3) at 5.0 V" · T=25°C, substrate=CO2Modelable
Current Density (Basis Unresolved)0.17A/m²90%
extracted
"Table 2 shows Current density (A/m2) of 0.17 ± 0.04 for Membrane-less at 1.9 V" · T=25°C, substrate=CO2Modelable
Current Density (Basis Unresolved)0.25A/m²90%
extracted
"Table 2 shows Current density (A/m2) of 0.25 ± 0.06 for Membrane-less at 2.2 V" · T=25°C, substrate=CO2Modelable
Current Density (Basis Unresolved)0.46A/m²90%
extracted
"Table 2 shows Current density (A/m2) of 0.46 ± 0.03 for Membrane-less at 2.5 V" · T=25°C, substrate=CO2Modelable
Coulombic efficiency54%90%
extracted
"Table 2 shows CE(%) of 54 ± 10% for Membrane-less at 2.5 V" · T=25°C, substrate=CO2Modelable
Current Density (Basis Unresolved)0.71A/m²90%
extracted
"Table 2 shows Current density (A/m2) of 0.71 ± 0.06 for H-cell (1) at 3.0 V" · T=25°C, substrate=CO2Modelable
Acetate Production Rate69mmole/day/m² cathode90%
extracted
"Table 2 shows acetate production (mmole/day/m2 cathode) of 69 ± 26 for H-cell (1…" · T=25°C, substrate=CO2, steady_stateExcluded: no SI value
Acetate Production Rate83mmole/day/m² cathode90%
extracted
"Table 2 shows acetate production (mmole/day/m2 cathode) of 83 ± 12 for H-cell (2…" · T=25°C, substrate=CO2, steady_stateExcluded: no SI value
Acetate Production Rate68.3g/kWh90%
extracted
"Table 2 shows acetate production (g/kWh) of 68.3 ± 11.9 for H-cell (2) at 3.5 V" · T=25°C, substrate=CO2Excluded: no SI value
Acetate Production Rate28mmole/day/m² cathode90%
extracted
"Table 2 shows acetate production (mmole/day/m2 cathode) of 28 ± 4 for Membrane-l…" · T=25°C, substrate=CO2, steady_stateExcluded: no SI value
Acetate Production Rate219g/kWh90%
extracted
"Table 2 shows acetate production (g/kWh) of 218.6 ± 64.3 for Membrane-less at 1.…" · T=25°C, substrate=CO2Excluded: no SI value
Showing 25 of 55

Methodology

What was the system and how was it run

Operating conditions

2 runs extracted
RunT°CpHanpHcatSubstrate[S]mg/LHRThModeR_extΩV_appVInoculum
v2-6dffa9aff721312b25——CO2——————
v2-866a4115af33894b25——CO2——steady_state———

Pipeline

Raw extractions, artifacts, quality signal

Extraction quality

honesty signal

Calibrate your trust in the extracted content against these signals — they're how the pipeline rated its own output for this paper.

Mean parameter confidence

90%

Average confidence across PaperParameter rows surfaced above

review against source PDF before citing · scores 0–1

03

Chart explorer

Move the inputs this paper used and see how the predicted outcome shifts.

04

Explore model

The reactor in 3D, with flow you can switch on and off.

05

AI insights

Contradictions, gaps and opportunities found by comparing this paper with the corpus.

06

Compare similar papers

The nearest papers by system, materials and organisms, with their outcomes side by side.

07

Source PDF

The paper as published.

loading 3D model…

Representative model, generic microbial electrochemical system

Representative microbial electrochemical system — matched on the paper’s system type only, not its reactor or geometry.

MES
System
1.70amperes per square metre
Best result · Current density
best of 7
55
Extracted values
2015
Year

In this record

Organisms, parameters and materials this paper reports. Each links to its page.

Organisms · 1

Keywords

  • Cathode
  • Anode
  • Electrosynthesis
  • Microbial fuel cell
  • Chemical engineering
  • Chemistry
  • Materials science
  • Nanotechnology
  • Electrochemistry
  • Electrode

Cite

Cloelle G. S. Giddings, Kelly P. Nevin, Trevor Woodward (2015). Simplifying microbial electrosynthesis reactor design. Frontiers in Microbiology. https://doi.org/10.3389/fmicb.2015.00468

Open in lab for full controls, parameter editing, and template overlays.

Open in lab